Re: [PATCH 3/4] mfd: axp20x: AXP717: Add support for boost regulator

[John Watts <contact@jookia.org>]

On Fri, Mar 29, 2024 at 11:50:32PM +0000, Andre Przywara wrote:
> The AXP717 also contains a boost regulator, to provide the 5V USB VBUS
> rail when running on battery.
> 
> Add the registers to the MFD description to be able to use them from the
> regulator driver.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Hi,

This patch looks correct to me- checked against the AXP717 datasheet.

John.

Reviewed-by: John Watts <contact@jookia.org>

> ---
>  drivers/mfd/axp20x.c       | 2 ++
>  include/linux/mfd/axp20x.h | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 48ce6ea693cea..62f3dd254d57b 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -209,6 +209,8 @@ static const struct regmap_access_table axp313a_volatile_table = {
>  };
>  
>  static const struct regmap_range axp717_writeable_ranges[] = {
> +	regmap_reg_range(AXP717_MODULE_EN_CONTROL, AXP717_MODULE_EN_CONTROL),
> +	regmap_reg_range(AXP717_BOOST_CONTROL, AXP717_BOOST_CONTROL),
>  	regmap_reg_range(AXP717_IRQ0_EN, AXP717_IRQ4_EN),
>  	regmap_reg_range(AXP717_DCDC_OUTPUT_CONTROL, AXP717_CPUSLDO_CONTROL),
>  };
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 8c0a33a2e9ce2..4dad54fdf67ee 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -115,6 +115,8 @@ enum axp20x_variants {
>  #define AXP313A_IRQ_STATE		0x21
>  
>  #define AXP717_ON_INDICATE		0x00
> +#define AXP717_MODULE_EN_CONTROL	0x19
> +#define AXP717_BOOST_CONTROL		0x1e
>  #define AXP717_IRQ0_EN			0x40
>  #define AXP717_IRQ1_EN			0x41
>  #define AXP717_IRQ2_EN			0x42
> -- 
> 2.35.8
>