From: John Watts <contact@jookia.org>
To: Andre Przywara <andre.przywara@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>, Lee Jones <lee@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@lists.linux.dev,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Ryan Walklin <ryan@testtoast.com>,
Chris Morgan <macroalpha82@gmail.com>
Subject: Re: [PATCH v2 2/5] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones
Date: Tue, 23 Apr 2024 10:09:12 +1000 [thread overview]
Message-ID: <Zib8KOXwqJT3ftHm@titan> (raw)
In-Reply-To: <20240418000736.24338-3-andre.przywara@arm.com>
On Thu, Apr 18, 2024 at 01:07:33AM +0100, Andre Przywara wrote:
> The X-Powers AXP717 PMIC has separate input supply pins for each group
> of LDOs, so they are not all using the same DCDC1 input, as described
> currently.
>
> Replace the "supply" member of each LDO description with the respective
> group supply name, so that the supply dependencies can be correctly
> described in the devicetree.
>
> Also fix two off-by-ones in the regulator macros, after some double
> checking the numbers against the datasheet. This uncovered a bug in the
> datasheet: add a comment to document this.
Hi,
This looks a lot better with the comment.
John.
Reviewed-by: John Watts <contact@jookia.org>
>
> Fixes: d2ac3df75c3a ("regulator: axp20x: add support for the AXP717")
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> drivers/regulator/axp20x-regulator.c | 33 ++++++++++++++++------------
> 1 file changed, 19 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
> index 34fcdd82b2eaa..f3c447ecdc3bf 100644
> --- a/drivers/regulator/axp20x-regulator.c
> +++ b/drivers/regulator/axp20x-regulator.c
> @@ -140,7 +140,7 @@
>
> #define AXP717_DCDC1_NUM_VOLTAGES 88
> #define AXP717_DCDC2_NUM_VOLTAGES 107
> -#define AXP717_DCDC3_NUM_VOLTAGES 104
> +#define AXP717_DCDC3_NUM_VOLTAGES 103
> #define AXP717_DCDC_V_OUT_MASK GENMASK(6, 0)
> #define AXP717_LDO_V_OUT_MASK GENMASK(4, 0)
>
> @@ -763,10 +763,15 @@ static const struct linear_range axp717_dcdc1_ranges[] = {
> REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
> };
>
> +/*
> + * The manual says that the last voltage is 3.4V, encoded as 0b1101011 (107),
> + * but every other method proves that this is wrong, so it's really 106 that
> + * programs the final 3.4V.
> + */
> static const struct linear_range axp717_dcdc2_ranges[] = {
> REGULATOR_LINEAR_RANGE(500000, 0, 70, 10000),
> REGULATOR_LINEAR_RANGE(1220000, 71, 87, 20000),
> - REGULATOR_LINEAR_RANGE(1600000, 88, 107, 100000),
> + REGULATOR_LINEAR_RANGE(1600000, 88, 106, 100000),
> };
>
> static const struct linear_range axp717_dcdc3_ranges[] = {
> @@ -790,40 +795,40 @@ static const struct regulator_desc axp717_regulators[] = {
> AXP_DESC(AXP717, DCDC4, "dcdc4", "vin4", 1000, 3700, 100,
> AXP717_DCDC4_CONTROL, AXP717_DCDC_V_OUT_MASK,
> AXP717_DCDC_OUTPUT_CONTROL, BIT(3)),
> - AXP_DESC(AXP717, ALDO1, "aldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO1, "aldo1", "aldoin", 500, 3500, 100,
> AXP717_ALDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(0)),
> - AXP_DESC(AXP717, ALDO2, "aldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO2, "aldo2", "aldoin", 500, 3500, 100,
> AXP717_ALDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(1)),
> - AXP_DESC(AXP717, ALDO3, "aldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO3, "aldo3", "aldoin", 500, 3500, 100,
> AXP717_ALDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(2)),
> - AXP_DESC(AXP717, ALDO4, "aldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, ALDO4, "aldo4", "aldoin", 500, 3500, 100,
> AXP717_ALDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(3)),
> - AXP_DESC(AXP717, BLDO1, "bldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO1, "bldo1", "bldoin", 500, 3500, 100,
> AXP717_BLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(4)),
> - AXP_DESC(AXP717, BLDO2, "bldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO2, "bldo2", "bldoin", 500, 3500, 100,
> AXP717_BLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(5)),
> - AXP_DESC(AXP717, BLDO3, "bldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO3, "bldo3", "bldoin", 500, 3500, 100,
> AXP717_BLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(6)),
> - AXP_DESC(AXP717, BLDO4, "bldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, BLDO4, "bldo4", "bldoin", 500, 3500, 100,
> AXP717_BLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO0_OUTPUT_CONTROL, BIT(7)),
> - AXP_DESC(AXP717, CLDO1, "cldo1", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO1, "cldo1", "cldoin", 500, 3500, 100,
> AXP717_CLDO1_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(0)),
> - AXP_DESC(AXP717, CLDO2, "cldo2", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO2, "cldo2", "cldoin", 500, 3500, 100,
> AXP717_CLDO2_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(1)),
> - AXP_DESC(AXP717, CLDO3, "cldo3", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO3, "cldo3", "cldoin", 500, 3500, 100,
> AXP717_CLDO3_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(2)),
> - AXP_DESC(AXP717, CLDO4, "cldo4", "vin1", 500, 3500, 100,
> + AXP_DESC(AXP717, CLDO4, "cldo4", "cldoin", 500, 3500, 100,
> AXP717_CLDO4_CONTROL, AXP717_LDO_V_OUT_MASK,
> AXP717_LDO1_OUTPUT_CONTROL, BIT(3)),
> AXP_DESC(AXP717, CPUSLDO, "cpusldo", "vin1", 500, 1400, 50,
> --
> 2.35.8
>
next prev parent reply other threads:[~2024-04-23 0:10 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 0:07 [PATCH v2 0/5] regulator: Fix AXP717 PMIC support Andre Przywara
2024-04-18 0:07 ` [PATCH v2 1/5] mfd: axp20x: AXP717: Fix missing IRQ status registers range Andre Przywara
2024-04-23 0:16 ` John Watts
2024-05-02 9:39 ` Lee Jones
2024-06-12 15:07 ` Andre Przywara
2024-06-12 15:25 ` Lee Jones
2024-06-12 15:34 ` Andre Przywara
2024-06-12 15:48 ` Lee Jones
2024-06-13 9:48 ` Andre Przywara
2024-06-13 12:04 ` Lee Jones
2024-04-18 0:07 ` [PATCH v2 2/5] regulator: axp20x: AXP717: fix LDO supply rails and off-by-ones Andre Przywara
2024-04-23 0:09 ` John Watts [this message]
2024-06-12 14:40 ` Andre Przywara
2024-06-14 8:12 ` Lee Jones
2024-06-14 10:01 ` Andre Przywara
2024-04-18 0:07 ` [PATCH v2 3/5] dt-bindings: mfd: x-powers,axp152: add boost regulator Andre Przywara
2024-05-02 9:39 ` Lee Jones
2024-04-18 0:07 ` [PATCH v2 4/5] mfd: axp20x: AXP717: Add support for " Andre Przywara
2024-05-02 9:39 ` Lee Jones
2024-05-22 18:54 ` Chris Morgan
2024-04-18 0:07 ` [PATCH v2 5/5] regulator: axp20x: AXP717: Add " Andre Przywara
2024-04-23 5:19 ` [PATCH v2 0/5] regulator: Fix AXP717 PMIC support Mark Brown
2024-05-02 9:38 ` Lee Jones
2024-05-06 15:29 ` Mark Brown
2024-04-28 8:41 ` Ryan Walklin
2024-05-02 9:37 ` Lee Jones
2024-05-06 15:26 ` Mark Brown
2024-05-06 15:29 ` Mark Brown
2024-06-14 9:24 ` (subset) " Mark Brown
2024-08-01 15:22 ` Chen-Yu Tsai
2024-08-05 14:21 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zib8KOXwqJT3ftHm@titan \
--to=contact@jookia.org \
--cc=andre.przywara@arm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macroalpha82@gmail.com \
--cc=robh@kernel.org \
--cc=ryan@testtoast.com \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).