* [PATCH v2] arm64: dts: imx8mm-verdin: add TPM device
@ 2024-06-27 10:48 Vitor Soares
2024-06-28 2:39 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Vitor Soares @ 2024-06-27 10:48 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Vitor Soares, devicetree, imx, linux-arm-kernel, linux-kernel,
ivitro
From: Vitor Soares <vitor.soares@toradex.com>
Add TPM device found on Verdin iMX8M Mini PID4 0090 variant.
While adding the node, rename `pinctrl_pmic_tpm_ena` to
`pinctrl_tpm_spi_cs`.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
v1->v2
- rename `pinctrl_pmic_tpm_ena` to `pinctrl_tpm_spi_cs`.
.../boot/dts/freescale/imx8mm-verdin.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 98544741ce17..6e066bd5d982 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -228,15 +228,16 @@ &ecspi2 {
pinctrl-0 = <&pinctrl_ecspi2>;
};
-/* Verdin CAN_1 (On-module) */
+/* On-module SPI */
&ecspi3 {
#address-cells = <1>;
#size-cells = <0>;
- cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi3>;
+ pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>;
status = "okay";
+ /* Verdin CAN_1 */
can1: can@0 {
compatible = "microchip,mcp251xfd";
clocks = <&clk40m>;
@@ -246,6 +247,12 @@ can1: can@0 {
reg = <0>;
spi-max-frequency = <8500000>;
};
+
+ verdin_som_tpm: tpm@1 {
+ compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
+ reg = <0x1>;
+ spi-max-frequency = <36000000>;
+ };
};
/* Verdin ETH_1 (On-module PHY) */
@@ -808,8 +815,7 @@ &iomuxc {
pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
<&pinctrl_gpio3>, <&pinctrl_gpio4>,
<&pinctrl_gpio7>, <&pinctrl_gpio8>,
- <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
- <&pinctrl_pmic_tpm_ena>;
+ <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
pinctrl_can1_int: can1intgrp {
fsl,pins =
@@ -1111,7 +1117,7 @@ pinctrl_sai5: sai5grp {
};
/* control signal for optional ATTPM20P or SE050 */
- pinctrl_pmic_tpm_ena: pmictpmenagrp {
+ pinctrl_tpm_spi_cs: pmictpmenagrp {
fsl,pins =
<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x106>; /* PMIC_TPM_ENA */
};
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mm-verdin: add TPM device
2024-06-27 10:48 [PATCH v2] arm64: dts: imx8mm-verdin: add TPM device Vitor Soares
@ 2024-06-28 2:39 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2024-06-28 2:39 UTC (permalink / raw)
To: Vitor Soares
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Vitor Soares, devicetree, imx, linux-arm-kernel, linux-kernel
On Thu, Jun 27, 2024 at 11:48:39AM +0100, Vitor Soares wrote:
> From: Vitor Soares <vitor.soares@toradex.com>
>
> Add TPM device found on Verdin iMX8M Mini PID4 0090 variant.
>
> While adding the node, rename `pinctrl_pmic_tpm_ena` to
> `pinctrl_tpm_spi_cs`.
>
> Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
> ---
> v1->v2
> - rename `pinctrl_pmic_tpm_ena` to `pinctrl_tpm_spi_cs`.
>
> .../boot/dts/freescale/imx8mm-verdin.dtsi | 18 ++++++++++++------
> 1 file changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> index 98544741ce17..6e066bd5d982 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> @@ -228,15 +228,16 @@ &ecspi2 {
> pinctrl-0 = <&pinctrl_ecspi2>;
> };
>
> -/* Verdin CAN_1 (On-module) */
> +/* On-module SPI */
> &ecspi3 {
> #address-cells = <1>;
> #size-cells = <0>;
> - cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
> + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, <&gpio4 19 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_ecspi3>;
> + pinctrl-0 = <&pinctrl_ecspi3>, <&pinctrl_tpm_spi_cs>;
> status = "okay";
>
> + /* Verdin CAN_1 */
> can1: can@0 {
> compatible = "microchip,mcp251xfd";
> clocks = <&clk40m>;
> @@ -246,6 +247,12 @@ can1: can@0 {
> reg = <0>;
> spi-max-frequency = <8500000>;
> };
> +
> + verdin_som_tpm: tpm@1 {
> + compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
> + reg = <0x1>;
> + spi-max-frequency = <36000000>;
> + };
> };
>
> /* Verdin ETH_1 (On-module PHY) */
> @@ -808,8 +815,7 @@ &iomuxc {
> pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
> <&pinctrl_gpio3>, <&pinctrl_gpio4>,
> <&pinctrl_gpio7>, <&pinctrl_gpio8>,
> - <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
> - <&pinctrl_pmic_tpm_ena>;
> + <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
>
> pinctrl_can1_int: can1intgrp {
> fsl,pins =
> @@ -1111,7 +1117,7 @@ pinctrl_sai5: sai5grp {
> };
>
> /* control signal for optional ATTPM20P or SE050 */
> - pinctrl_pmic_tpm_ena: pmictpmenagrp {
> + pinctrl_tpm_spi_cs: pmictpmenagrp {
The node name should probably be updated to match pinctrl label?
Shawn
> fsl,pins =
> <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x106>; /* PMIC_TPM_ENA */
> };
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-06-28 2:40 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-06-27 10:48 [PATCH v2] arm64: dts: imx8mm-verdin: add TPM device Vitor Soares
2024-06-28 2:39 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).