Re: [PATCH v5 4/7] spi: spi-axi-spi-engine: Add support for MOSI idle configuration

[Marcelo Schmitt <marcelo.schmitt1@gmail.com>]

On 06/26, Alexandru Ardelean wrote:
> On Wed, Jun 26, 2024 at 12:55 AM Marcelo Schmitt
> <marcelo.schmitt@analog.com> wrote:
> >
> > Implement MOSI idle low and MOSI idle high to better support peripherals
> > that request specific MOSI behavior.
> >
> 
> One minor nitpick.
> Feel free to ignore, if there won't be a re-spin.
> 
> > Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
> > ---
> >  drivers/spi/spi-axi-spi-engine.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
...
> > @@ -646,6 +651,9 @@ static int spi_engine_probe(struct platform_device *pdev)
> >
> >         host->dev.of_node = pdev->dev.of_node;
> >         host->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
> > +       if (ADI_AXI_PCORE_VER_MAJOR(version) >= 1 &&
> > +           ADI_AXI_PCORE_VER_MINOR(version) >= 3)
> > +               host->mode_bits |=  SPI_MOSI_IDLE_LOW | SPI_MOSI_IDLE_HIGH;
> 
> There's a second space after the assignment.
>                host->mode_bits |=<2 spaces here>SPI_MOSI_IDLE_LOW |
> SPI_MOSI_IDLE_HIGH;
ack

thanks
> 
> 
> >         host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
> >         host->max_speed_hz = clk_get_rate(spi_engine->ref_clk) / 2;
> >         host->transfer_one_message = spi_engine_transfer_one_message;
> > --
> > 2.43.0
> >
> >