Re: [PATCH v4 1/2] dt-bindings: net: airoha: Add EN7581 ethernet controller

[Lorenzo Bianconi <lorenzo@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 6868 bytes --]

> On Sat, Jun 29, 2024 at 05:01:37PM +0200, Lorenzo Bianconi wrote:
> > Introduce device-tree binding documentation for Airoha EN7581 ethernet
> > mac controller.
> > 
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> >  .../bindings/net/airoha,en7581-eth.yaml       | 171 ++++++++++++++++++
> >  1 file changed, 171 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> > new file mode 100644
> > index 000000000000..e2c0da02ccf2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml
> > @@ -0,0 +1,171 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/airoha,en7581-eth.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Airoha EN7581 Frame Engine Ethernet controller
> > +
> > +allOf:
> > +  - $ref: ethernet-controller.yaml#
> > +
> > +maintainers:
> > +  - Lorenzo Bianconi <lorenzo@kernel.org>
> > +
> > +description:
> > +  The frame engine ethernet controller can be found on Airoha SoCs.
> > +  These SoCs have dual GMAC ports.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - airoha,en7581-eth
> > +
> > +  reg:
> > +    items:
> > +      - description: Frame engine base address
> > +      - description: QDMA0 base address
> > +      - description: QDMA1 base address
> > +
> > +  reg-names:
> > +    items:
> > +      - const: fe
> > +      - const: qdma0
> > +      - const: qdma1
> > +
> > +  interrupts:
> > +    items:
> > +      - description: QDMA lan irq0
> > +      - description: QDMA lan irq1
> > +      - description: QDMA lan irq2
> > +      - description: QDMA lan irq3
> > +      - description: QDMA wan irq0
> > +      - description: QDMA wan irq1
> > +      - description: QDMA wan irq2
> > +      - description: QDMA wan irq3
> > +      - description: FE error irq
> > +      - description: PDMA irq
> > +
> > +  resets:
> > +    maxItems: 8
> > +
> > +  reset-names:
> > +    items:
> > +      - const: fe
> > +      - const: pdma
> > +      - const: qdma
> > +      - const: xsi-mac
> > +      - const: hsi0-mac
> > +      - const: hsi1-mac
> > +      - const: hsi-mac
> > +      - const: xfp-mac
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +patternProperties:
> > +  "^mac@[1-4]$":
> 
> ethernet@

Should it be like mtk_eth_soc binding?
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/net/mediatek%2Cnet.yaml#L371

> 
> > +    type: object
> > +    unevaluatedProperties: false
> > +    allOf:
> 
> Can drop 'allOf'

ack, I will fix it in v5

> 
> > +      - $ref: ethernet-controller.yaml#
> 
> Which node represents an ethernet controller? This one or the parent? 
> Most likely it is not both.

This node reprensts the GMAC port associated to the parent enternet controller.

> 
> > +    description:
> > +      Ethernet MAC node
> > +    properties:
> > +      compatible:
> > +        const: airoha,eth-mac
> > +
> > +      reg:
> > +        maxItems: 1
> 
> Based on the unit-address, you need instead:
> 
> minimum: 1
> maximum: 4

ack, I will fix it in v5

> 
> But what does 1-4 represent? There are no MMIO registers associated with 
> the MACs? Please describe.

This is the GMAC port ID.

> 
> > +
> > +    required:
> > +      - reg
> > +      - compatible
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - resets
> > +  - reset-names
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/clock/en7523-clk.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      eth0: ethernet@1fb50000 {
> > +        compatible = "airoha,en7581-eth";
> > +        reg = <0 0x1fb50000 0 0x2600>,
> > +              <0 0x1fb54000 0 0x2000>,
> > +              <0 0x1fb56000 0 0x2000>;
> > +        reg-names = "fe", "qdma0", "qdma1";
> > +
> > +        resets = <&scuclk 44>,
> > +                 <&scuclk 30>,
> > +                 <&scuclk 31>,
> > +                 <&scuclk 6>,
> > +                 <&scuclk 15>,
> > +                 <&scuclk 16>,
> > +                 <&scuclk 17>,
> > +                 <&scuclk 26>;
> > +        reset-names = "fe", "pdma", "qdma", "xsi-mac",
> > +                      "hsi0-mac", "hsi1-mac", "hsi-mac",
> > +                      "xfp-mac";
> > +
> > +        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        mac1: mac@1 {
> > +          compatible = "airoha,eth-mac";
> > +          reg = <1>;
> > +          phy-mode = "2500base-x";
> > +          phy-handle = <&phy0>;
> > +        };
> > +
> > +        mac2: mac@2 {
> > +          compatible = "airoha,eth-mac";
> > +          reg = <2>;
> > +          phy-mode = "2500base-x";
> > +          phy-handle = <&phy1>;
> > +        };
> > +      };
> > +
> > +      mdio: mdio-bus {
> 
> mdio {
> 
> But really, drop this if it is not part of this device (binding). What 
> is the control interface for this MDIO bus? If it is part of this 
> device, then the mdio node needs to be within the device's node.

ack, I will drop it in v5.

Regards,
Lorenzo

> 
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        phy0: ethernet-phy@0 {
> > +            compatible = "ethernet-phy-id67c9.de0a";
> > +            reg = <0>;
> > +            phy-mode = "2500base-x";
> > +        };
> > +
> > +        phy1: ethernet-phy@1 {
> > +            compatible = "ethernet-phy-id67c9.de0a";
> > +            reg = <1>;
> > +            phy-mode = "2500base-x";
> > +        };
> > +      };
> > +    };
> > -- 
> > 2.45.2
> > 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]