devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Abel Vesa <abel.vesa@linaro.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Marijn Suijten <marijn.suijten@somainline.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: Re: [PATCH 3/3] arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
Date: Mon, 22 Jul 2024 13:08:02 +0300	[thread overview]
Message-ID: <Zp4vghH5SK/rLEce@linaro.org> (raw)
In-Reply-To: <824edc08-f67f-4b2f-b4aa-da5df69b9df4@linaro.org>

On 24-07-22 10:42:57, Konrad Dybcio wrote:
> On 21.07.2024 6:40 PM, Abel Vesa wrote:
> > On 24-07-19 22:16:38, Konrad Dybcio wrote:
> >> Add support for the aforementioned laptop. That includes:
> >>
> >> - input methods, incl. lid switch (keyboard needs the pdc
> >>   wakeup-parent removal hack..)
> >> - NVMe, WiFi
> >> - USB-C ports
> >> - GPU, display
> >> - DSPs
> >>
> >> Notably, the USB-A ports on the side are depenedent on the USB
> >> multiport controller making it upstream.
> >>
> >> At least one of the eDP panels used (non-touchscreen) identifies as
> >> BOE 0x0b66.
> >>
> >> See below for the hardware description from the OEM.
> >>
> >> Link: https://www.lenovo.com/us/en/p/laptops/thinkpad/thinkpadt/lenovo-thinkpad-t14s-gen-6-(14-inch-snapdragon)/len101t0099
> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> > 
> > Few comments below. Otherwise, LGTM.
> > 
> > Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
> > 
> >> ---
> >>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
> >>  .../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts     | 792 +++++++++++++++++++++
> >>  2 files changed, 793 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> >> index 0e5c810304fb..734a05e04c4a 100644
> >> --- a/arch/arm64/boot/dts/qcom/Makefile
> >> +++ b/arch/arm64/boot/dts/qcom/Makefile
> >> @@ -261,6 +261,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk-display-card.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-hdk.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-mtp.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8650-qrd.dtb
> >> +dtb-$(CONFIG_ARCH_QCOM)	+= x1e78100-lenovo-thinkpad-t14s.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-vivobook-s15.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-lenovo-yoga-slim7x.dtb
> >> diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts
> > 
> > So what happens for SKUs of this model wil have x1e80100 ?
> > 
> > Maybe we should stick to x1e80100 ?
> 
> This one only ships with 78100
> 

Sure, but then in upstream we only have 80100. Plus, it is included in
this file as well.

I don't know what's the right thing to do here. But I think it keeps
things more simple if we keep everything under the x1e80100 umbrella.

> [...]
> 
> >> +	vreg_edp_3p3: regulator-edp-3p3 {
> >> +		compatible = "regulator-fixed";
> >> +
> >> +		regulator-name = "VREG_EDP_3P3";
> >> +		regulator-min-microvolt = <3300000>;
> >> +		regulator-max-microvolt = <3300000>;
> >> +
> >> +		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
> >> +		enable-active-high;
> >> +
> >> +		pinctrl-0 = <&edp_reg_en>;
> >> +		pinctrl-names = "default";
> >> +
> >> +		regulator-always-on;
> > 
> > Drop this.
> 
> Oops!
> 
> [...]
> 
> >> +
> >> +	edp_reg_en: edp-reg-en-state {
> >> +		pins = "gpio70";
> >> +		function = "gpio";
> >> +		drive-strength = <16>;
> >> +		bias-pull-up;
> > 
> > bias-disable, maybe ?
> 
> Yeah, probably
> 
> Konrad
> 

  reply	other threads:[~2024-07-22 10:08 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-19 20:16 [PATCH 0/3] ThinkPad T14s Gen 6 support Konrad Dybcio
2024-07-19 20:16 ` [PATCH 1/3] dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6 Konrad Dybcio
2024-07-21 10:22   ` Krzysztof Kozlowski
2024-07-22 21:24   ` Rob Herring
2024-07-22 22:40     ` Konrad Dybcio
2024-07-19 20:16 ` [PATCH 2/3] firmware: qcom: scm: Allow QSEECOM on ThinkPad T14s Konrad Dybcio
2024-07-21 16:40   ` Abel Vesa
2024-07-19 20:16 ` [PATCH 3/3] arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6 Konrad Dybcio
2024-07-21 16:40   ` Abel Vesa
2024-07-22  8:42     ` Konrad Dybcio
2024-07-22 10:08       ` Abel Vesa [this message]
2024-07-22 15:00         ` Rob Clark
2024-07-22 16:03           ` Dmitry Baryshkov
2024-07-23 18:55             ` Bjorn Andersson
2024-07-23 21:28               ` Mark Kettenis
2024-07-29 20:42                 ` Rob Clark
2024-07-22 10:04   ` Johan Hovold
2024-07-23  2:57 ` [PATCH 0/3] ThinkPad T14s Gen 6 support Rob Herring (Arm)
2024-07-29  3:58 ` (subset) " Bjorn Andersson
2024-08-16 16:30   ` Rob Herring
2024-08-26 17:05     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zp4vghH5SK/rLEce@linaro.org \
    --to=abel.vesa@linaro.org \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=johan@kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).