Devicetree
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Liu Ying <victor.liu@nxp.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com
Subject: Re: [PATCH] arm64: dts: imx8mp-evk: Add native HDMI output
Date: Thu, 22 Aug 2024 00:16:53 -0400	[thread overview]
Message-ID: <Zsa7tf98tHC9xKZX@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240822033318.753724-1-victor.liu@nxp.com>

On Thu, Aug 22, 2024 at 11:33:18AM +0800, Liu Ying wrote:
> J17 on i.MX8mp EVK base board is a HDMI type A connector.
> It connects with i.MX8mp HDMI PHY.  Add support for it.
>
> Signed-off-by: Liu Ying <victor.liu@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 46 ++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 938347704136..f118fe8ab5ac 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -56,6 +56,18 @@ memory@40000000 {
>  		      <0x1 0x00000000 0 0xc0000000>;
>  	};
>
> +	native-hdmi-connector {
> +		compatible = "hdmi-connector";
> +		label = "HDMI OUT";
> +		type = "a";
> +
> +		port {
> +			hdmi_out: endpoint {
> +				remote-endpoint = <&hdmi_tx_out>;
> +			};
> +		};
> +	};
> +
>  	pcie0_refclk: pcie0-refclk {
>  		compatible = "fixed-clock";
>  		#clock-cells = <0>;
> @@ -408,6 +420,28 @@ &flexcan2 {
>  	status = "disabled";/* can2 pin conflict with pdm */
>  };
>
> +&hdmi_pvi {
> +	status = "okay";
> +};
> +
> +&hdmi_tx {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hdmi>;
> +	status = "okay";
> +
> +	ports {
> +		port@1 {
> +			hdmi_tx_out: endpoint {
> +				remote-endpoint = <&hdmi_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&hdmi_tx_phy {
> +	status = "okay";
> +};
> +
>  &i2c1 {
>  	clock-frequency = <400000>;
>  	pinctrl-names = "default";
> @@ -604,6 +638,10 @@ &lcdif1 {
>  	status = "okay";
>  };
>
> +&lcdif3 {
> +	status = "okay";
> +};
> +
>  &micfil {
>  	#sound-dai-cells = <0>;
>  	pinctrl-names = "default";
> @@ -858,6 +896,14 @@ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16	0x140
>  		>;
>  	};
>
> +	pinctrl_hdmi: hdmigrp {
> +		fsl,pins = <
> +			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
> +			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
> +			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
> +		>;
> +	};
> +
>  	pinctrl_hog: hoggrp {
>  		fsl,pins = <
>  			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x40000010
> --
> 2.34.1
>

  reply	other threads:[~2024-08-22  4:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-22  3:33 [PATCH] arm64: dts: imx8mp-evk: Add native HDMI output Liu Ying
2024-08-22  4:16 ` Frank Li [this message]
2024-08-22  6:27 ` Alexander Stein
2024-08-22  6:37   ` Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Zsa7tf98tHC9xKZX@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox