From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
Jens Wiklander <jens.wiklander@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
op-tee@lists.trustedfirmware.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v9 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release
Date: Thu, 12 Sep 2024 09:41:23 -0600 [thread overview]
Message-ID: <ZuMLo2+an1sxdYlt@p14s> (raw)
In-Reply-To: <20240830095147.3538047-7-arnaud.pouliquen@foss.st.com>
On Fri, Aug 30, 2024 at 11:51:46AM +0200, Arnaud Pouliquen wrote:
> To prepare for the support of TEE remoteproc, create sub-functions
> that can be used in both cases, with and without remoteproc TEE support.
>
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
> ---
> drivers/remoteproc/stm32_rproc.c | 84 +++++++++++++++++++-------------
> 1 file changed, 51 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c
> index 8c7f7950b80e..79c638936163 100644
> --- a/drivers/remoteproc/stm32_rproc.c
> +++ b/drivers/remoteproc/stm32_rproc.c
> @@ -209,6 +209,54 @@ static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name)
> return -EINVAL;
> }
>
> +static void stm32_rproc_request_shutdown(struct rproc *rproc)
> +{
> + struct stm32_rproc *ddata = rproc->priv;
> + int err, dummy_data, idx;
> +
> + /* Request shutdown of the remote processor */
> + if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> + idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> + if (idx >= 0 && ddata->mb[idx].chan) {
> + /* A dummy data is sent to allow to block on transmit. */
> + err = mbox_send_message(ddata->mb[idx].chan,
> + &dummy_data);
When refactoring functions, please do not change the inner code. Here
@dummy_data was introduced. Making changes, even small ones, makes it really
hard to review your work. I'm pretty sure we talked about that before.
> + if (err < 0)
> + dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> + }
> + }
> +}
> +
> +static int stm32_rproc_release(struct rproc *rproc)
> +{
> + struct stm32_rproc *ddata = rproc->priv;
> + unsigned int err = 0;
> +
> + /* To allow platform Standby power mode, set remote proc Deep Sleep. */
> + if (ddata->pdds.map) {
> + err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> + ddata->pdds.mask, 1);
> + if (err) {
> + dev_err(&rproc->dev, "failed to set pdds\n");
> + return err;
> + }
> + }
> +
> + /* Update coprocessor state to OFF if available. */
> + if (ddata->m4_state.map) {
> + err = regmap_update_bits(ddata->m4_state.map,
> + ddata->m4_state.reg,
> + ddata->m4_state.mask,
> + M4_STATE_OFF);
> + if (err) {
> + dev_err(&rproc->dev, "failed to set copro state\n");
> + return err;
> + }
> + }
> +
> + return 0;
> +}
> +
> static int stm32_rproc_prepare(struct rproc *rproc)
> {
> struct device *dev = rproc->dev.parent;
> @@ -519,17 +567,9 @@ static int stm32_rproc_detach(struct rproc *rproc)
> static int stm32_rproc_stop(struct rproc *rproc)
> {
> struct stm32_rproc *ddata = rproc->priv;
> - int err, idx;
> + int err;
>
> - /* request shutdown of the remote processor */
> - if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) {
> - idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN);
> - if (idx >= 0 && ddata->mb[idx].chan) {
> - err = mbox_send_message(ddata->mb[idx].chan, "detach");
> - if (err < 0)
> - dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n");
> - }
> - }
> + stm32_rproc_request_shutdown(rproc);
>
> err = stm32_rproc_set_hold_boot(rproc, true);
> if (err)
> @@ -541,29 +581,7 @@ static int stm32_rproc_stop(struct rproc *rproc)
> return err;
> }
>
> - /* to allow platform Standby power mode, set remote proc Deep Sleep */
> - if (ddata->pdds.map) {
> - err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg,
> - ddata->pdds.mask, 1);
> - if (err) {
> - dev_err(&rproc->dev, "failed to set pdds\n");
> - return err;
> - }
> - }
> -
> - /* update coprocessor state to OFF if available */
> - if (ddata->m4_state.map) {
> - err = regmap_update_bits(ddata->m4_state.map,
> - ddata->m4_state.reg,
> - ddata->m4_state.mask,
> - M4_STATE_OFF);
> - if (err) {
> - dev_err(&rproc->dev, "failed to set copro state\n");
> - return err;
> - }
> - }
> -
> - return 0;
> + return stm32_rproc_release(rproc);
> }
>
> static void stm32_rproc_kick(struct rproc *rproc, int vqid)
> --
> 2.25.1
>
next prev parent reply other threads:[~2024-09-12 15:41 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-30 9:51 [PATCH v9 0/7] Introduction of a remoteproc tee to load signed firmware Arnaud Pouliquen
2024-08-30 9:51 ` [PATCH v9 1/7] remoteproc: core: Introduce rproc_pa_to_va helper Arnaud Pouliquen
2024-08-30 9:51 ` [PATCH v9 2/7] remoteproc: Add TEE support Arnaud Pouliquen
2024-09-11 15:17 ` Mathieu Poirier
2024-09-11 15:25 ` Mathieu Poirier
2024-09-13 16:01 ` Mathieu Poirier
2024-08-30 9:51 ` [PATCH v9 3/7] remoteproc: core: Refactor resource table cleanup into rproc_release_fw Arnaud Pouliquen
2024-09-11 15:20 ` Mathieu Poirier
2024-08-30 9:51 ` [PATCH v9 4/7] remoteproc: core: Add TEE interface support for firmware release Arnaud Pouliquen
2024-08-31 16:43 ` kernel test robot
2024-09-02 7:18 ` Arnaud POULIQUEN
2024-09-11 15:56 ` Mathieu Poirier
2024-09-12 15:26 ` Mathieu Poirier
2024-09-17 16:56 ` Arnaud POULIQUEN
2024-09-23 14:53 ` Mathieu Poirier
2024-09-18 14:43 ` Arnaud POULIQUEN
2024-09-23 15:13 ` Mathieu Poirier
2024-09-26 3:51 ` Bjorn Andersson
2024-09-27 10:01 ` Arnaud POULIQUEN
2024-08-30 9:51 ` [PATCH v9 5/7] dt-bindings: remoteproc: Add compatibility for TEE support Arnaud Pouliquen
2024-08-30 9:51 ` [PATCH v9 6/7] remoteproc: stm32: Create sub-functions to request shutdown and release Arnaud Pouliquen
2024-09-12 15:41 ` Mathieu Poirier [this message]
2024-08-30 9:51 ` [PATCH v9 7/7] remoteproc: stm32: Add support of an OP-TEE TA to load the firmware Arnaud Pouliquen
2024-09-13 16:03 ` Mathieu Poirier
2024-09-16 14:08 ` Arnaud POULIQUEN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZuMLo2+an1sxdYlt@p14s \
--to=mathieu.poirier@linaro.org \
--cc=andersson@kernel.org \
--cc=arnaud.pouliquen@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jens.wiklander@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=op-tee@lists.trustedfirmware.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).