From: Daniel Golle <daniel@makrotopia.org>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Zhihao Cheng <chengzhihao1@huawei.com>,
John Crispin <john@phrozen.org>,
linux-mtd@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH RFC 1/2] dt-bindings: mtd: ubi-volume: add 'volume-is-critical' property
Date: Sat, 28 Sep 2024 14:09:07 +0100 [thread overview]
Message-ID: <Zvf_84xxhxwpPgee@makrotopia.org> (raw)
In-Reply-To: <7a2e8819-ac70-4070-a731-53994c72cd79@kernel.org>
On Sat, Sep 28, 2024 at 03:02:47PM +0200, Krzysztof Kozlowski wrote:
> On 28/09/2024 14:47, Daniel Golle wrote:
> > Add the 'volume-is-critical' boolean property which marks a UBI volume
> > as critical for the device to boot. If set it prevents the user from
> > all kinds of write access to the volume as well as from renaming it or
> > detaching the UBI device it is located on.
> >
> > Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> > ---
> > .../devicetree/bindings/mtd/partitions/ubi-volume.yaml | 9 +++++++++
> > 1 file changed, 9 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
> > index 19736b26056b..2bd751bb7f9e 100644
> > --- a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml
> > @@ -29,6 +29,15 @@ properties:
> > description:
> > This container may reference an NVMEM layout parser.
> >
> > + volume-is-critical:
> > + description: This parameter, if present, indicates that the UBI volume
> > + contains early-boot firmware images or data which should not be clobbered.
> > + If set, it prevents the user from renaming the volume, writing to it or
> > + making any changes affecting it, as well as detaching the UBI device it is
> > + located on, so direct access to the underlying MTD device is prevented as
> > + well.
> > + type: boolean
>
> UBI volumes are mapping to partitions 1-to-1, right? So rather I would
> propose to use partition.yaml - we already have read-only there with
> very similar description.
No, that's not the case.
An MTD partition can be used as UBI device. A UBI device (and hence MTD
partition) can host *several* UBI volumes.
Marking the MTD partition as 'read-only' won't work, as UBI needs
read-write access to perform bad block relocation, scrubbing, ...
Also, typically not all UBI volumes on a UBI device are
read-only/critical but only a subset of them.
But you are right that the description is inspired by the description
of the 'read-only' property in partition.yaml ;)
I initially thought to also name the property 'read-only', just like
for MTD partitions. However, as the desired effect goes beyond
preventing write access to the volume itself, I thought it'd be
better to use a new name.
next prev parent reply other threads:[~2024-09-28 13:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-28 12:47 [PATCH RFC 1/2] dt-bindings: mtd: ubi-volume: add 'volume-is-critical' property Daniel Golle
2024-09-28 12:48 ` [PATCH RFC 2/2] mtd: ubi: add support for protecting critical volumes Daniel Golle
2024-09-29 12:26 ` Richard Weinberger
2024-09-30 1:56 ` Zhihao Cheng
2024-09-30 18:43 ` Richard Weinberger
2024-09-30 19:39 ` Daniel Golle
2024-09-30 19:54 ` Richard Weinberger
2024-10-08 2:55 ` Zhihao Cheng
2024-09-28 13:02 ` [PATCH RFC 1/2] dt-bindings: mtd: ubi-volume: add 'volume-is-critical' property Krzysztof Kozlowski
2024-09-28 13:09 ` Daniel Golle [this message]
2024-09-28 13:45 ` Krzysztof Kozlowski
2024-09-28 14:38 ` Daniel Golle
2024-09-29 4:03 ` Zhihao Cheng
2024-09-29 10:52 ` Daniel Golle
2024-09-29 11:23 ` Zhihao Cheng
2024-09-29 12:16 ` Daniel Golle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zvf_84xxhxwpPgee@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=chengzhihao1@huawei.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).