devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Jisheng Zhang <jszhang@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Jose Abreu <joabreu@synopsys.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH net-next v3 06/10] net: stmmac: xgmac: support per-channel irq
Date: Thu, 10 Aug 2023 16:52:01 +0200	[thread overview]
Message-ID: <a12b6d39-0e26-7bdc-4207-c767342ebcf6@foss.st.com> (raw)
In-Reply-To: <20230809165007.1439-7-jszhang@kernel.org>

On 8/9/23 18:50, Jisheng Zhang wrote:
> The IP supports per channel interrupt, add support for this usage case.
> 
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
>   .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |  2 ++
>   .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    | 33 +++++++++++--------
>   2 files changed, 22 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> index 81cbb13a101d..12e1228ccf2a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
> @@ -327,6 +327,8 @@
>   
>   /* DMA Registers */
>   #define XGMAC_DMA_MODE			0x00003000
> +#define XGMAC_INTM			GENMASK(13, 12)
> +#define XGMAC_INTM_MODE1		0x1
>   #define XGMAC_SWR			BIT(0)
>   #define XGMAC_DMA_SYSBUS_MODE		0x00003004
>   #define XGMAC_WR_OSR_LMT		GENMASK(29, 24)
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> index b5ba4e0cca55..ef25af92d6cc 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
> @@ -31,6 +31,13 @@ static void dwxgmac2_dma_init(void __iomem *ioaddr,
>   		value |= XGMAC_EAME;
>   
>   	writel(value, ioaddr + XGMAC_DMA_SYSBUS_MODE);
> +
> +	if (dma_cfg->perch_irq_en) {
> +		value = readl(ioaddr + XGMAC_DMA_MODE);
> +		value &= ~XGMAC_INTM;
> +		value |= FIELD_PREP(XGMAC_INTM, XGMAC_INTM_MODE1);
> +		writel(value, ioaddr + XGMAC_DMA_MODE);
> +	}
>   }
>   
>   static void dwxgmac2_dma_init_chan(struct stmmac_priv *priv,
> @@ -365,20 +372,20 @@ static int dwxgmac2_dma_interrupt(struct stmmac_priv *priv,
>   	}
>   
>   	/* TX/RX NORMAL interrupts */
> -	if (likely(intr_status & XGMAC_NIS)) {

No longer need to check NIS bit ?

> -		if (likely(intr_status & XGMAC_RI)) {
> -			u64_stats_update_begin(&rx_q->rxq_stats.syncp);
> -			rx_q->rxq_stats.rx_normal_irq_n++;
> -			u64_stats_update_end(&rx_q->rxq_stats.syncp);
> -			ret |= handle_rx;
> -		}
> -		if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
> -			u64_stats_update_begin(&tx_q->txq_stats.syncp);
> -			tx_q->txq_stats.tx_normal_irq_n++;
> -			u64_stats_update_end(&tx_q->txq_stats.syncp);
> -			ret |= handle_tx;
> -		}
> +	if (likely(intr_status & XGMAC_RI)) {
> +		u64_stats_update_begin(&rx_q->rxq_stats.syncp);
> +		rx_q->rxq_stats.rx_normal_irq_n++;
> +		u64_stats_update_end(&rx_q->rxq_stats.syncp);
> +		ret |= handle_rx;
> +	}
> +	if (likely(intr_status & XGMAC_TI)) {
> +		u64_stats_update_begin(&tx_q->txq_stats.syncp);
> +		tx_q->txq_stats.tx_normal_irq_n++;
> +		u64_stats_update_end(&tx_q->txq_stats.syncp);
> +		ret |= handle_tx;
>   	}
> +	if (unlikely(intr_status & XGMAC_TBU))
> +		ret |= handle_tx;
>   
>   	/* Clear interrupts */
>   	writel(intr_en & intr_status, ioaddr + XGMAC_DMA_CH_STATUS(chan));


  reply	other threads:[~2023-08-10 14:52 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-09 16:49 [PATCH net-next v3 00/10] net: stmmac: add new features to xgmac Jisheng Zhang
2023-08-09 16:49 ` [PATCH net-next v3 01/10] net: stmmac: correct RX COE parsing for xgmac Jisheng Zhang
2023-08-10 13:45   ` Alexandre TORGUE
2023-08-09 16:49 ` [PATCH net-next v3 02/10] net: stmmac: xgmac: add more feature parsing from hw cap Jisheng Zhang
2023-08-10 13:46   ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 03/10] net: stmmac: mdio: enlarge the max XGMAC C22 ADDR to 31 Jisheng Zhang
2023-08-10 13:46   ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 04/10] net: stmmac: enlarge max rx/tx queues and channels to 16 Jisheng Zhang
2023-08-10 14:43   ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 05/10] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety Jisheng Zhang
2023-08-10 14:50   ` Alexandre TORGUE
2023-08-10 16:02     ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 06/10] net: stmmac: xgmac: support per-channel irq Jisheng Zhang
2023-08-10 14:52   ` Alexandre TORGUE [this message]
2023-08-16 15:52     ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 07/10] dt-bindings: net: snps,dwmac: add safety irq support Jisheng Zhang
2023-08-15 21:09   ` Krzysztof Kozlowski
2023-08-09 16:50 ` [PATCH net-next v3 08/10] net: stmmac: platform: support parsing safety irqs from DT Jisheng Zhang
2023-08-10 14:52   ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 09/10] dt-bindings: net: snps,dwmac: add per channel irq support Jisheng Zhang
2023-08-09 17:38   ` Conor Dooley
2023-08-10 15:45     ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 10/10] net: stmmac: platform: support parsing per channel irq from DT Jisheng Zhang
2023-08-10 14:57   ` Alexandre TORGUE
2023-08-10 16:09     ` Jisheng Zhang
2023-08-10 16:21       ` Jisheng Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a12b6d39-0e26-7bdc-4207-c767342ebcf6@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=jszhang@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).