Re: [net-next v6 4/7] net: mtip: The L2 switch driver for imx287

[Stefan Wahren <wahrenst@gmx.net>]

Am 18.04.25 um 11:02 schrieb Lukasz Majewski:
> Hi Stefan,
>
>> Am 18.04.25 um 08:07 schrieb Lukasz Majewski:
>>> This patch series provides support for More Than IP L2 switch
>>> embedded in the imx287 SoC.
>>>
>>> This is a two port switch (placed between uDMA[01] and MAC-NET[01]),
>>> which can be used for offloading the network traffic.
>>>
>>> It can be used interchangeably with current FEC driver - to be more
>>> specific: one can use either of it, depending on the requirements.
>>>
>>> The biggest difference is the usage of DMA - when FEC is used,
>>> separate DMAs are available for each ENET-MAC block.
>>> However, with switch enabled - only the DMA0 is used to
>>> send/receive data to/form switch (and then switch sends them to
>>> respecitive ports).
>>>
>>> Signed-off-by: Lukasz Majewski <lukma@denx.de>
>> After changing the IRQ name part mention in patch 1, you can add
>>
>> Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
>>
> Shall I add RoB tag to all patches?
In case you mean Reviewed-by: yes
>
> I will wait for ACK from at least Andrew and then reset the v7 with all
> tags collected.
>
>> Thanks
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de