Re: [PATCH v4 2/3] clk: vc5: Add bindings for IDT VersaClock 5P49V5935

[Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 04/07/2017 11:12 AM, Alexey Firago wrote:
> IDT VersaClock 5 5P49V5935 has 4 clock outputs, 4 fractional dividers.
> Input clock source can be taken from either integrated crystal or from
> external reference clock.
> 
> Signed-off-by: Alexey Firago <alexey_firago-nmGgyN9QBj3QT0dZR+AlfA@public.gmane.org>

I think you want a R-B from Rob on this.

> ---
>  .../devicetree/bindings/clock/idt,versaclock5.txt        | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> index 87e9c47..53d7e50 100644
> --- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
> @@ -6,18 +6,21 @@ from 3 to 12 output clocks.
>  ==I2C device node==
>  
>  Required properties:
> -- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933".
> +- compatible:	shall be one of "idt,5p49v5923" , "idt,5p49v5933" ,
> +		"idt,5p49v5935".
>  - reg:		i2c device address, shall be 0x68 or 0x6a.
>  - #clock-cells:	from common clock binding; shall be set to 1.
>  - clocks:	from common clock binding; list of parent clock handles,
>  		- 5p49v5923: (required) either or both of XTAL or CLKIN
>  					reference clock.
> -		- 5p49v5933: (optional) property not present (internal
> +		- 5p49v5933 and
> +		- 5p49v5935: (optional) property not present (internal
>  					Xtal used) or CLKIN reference
>  					clock.
>  - clock-names:	from common clock binding; clock input names, can be
>  		- 5p49v5923: (required) either or both of "xin", "clkin".
> -		- 5p49v5933: (optional) property not present or "clkin".
> +		- 5p49v5933 and
> +		- 5p49v5935: (optional) property not present or "clkin".
>  
>  ==Mapping between clock specifier and physical pins==
>  
> @@ -34,6 +37,13 @@ clock specifier, the following mapping applies:
>  	1 -- OUT1
>  	2 -- OUT4
>  
> +5P49V5935:
> +	0 -- OUT0_SEL_I2CB
> +	1 -- OUT1
> +	2 -- OUT2
> +	3 -- OUT3
> +	4 -- OUT4
> +
>  ==Example==
>  
>  /* 25MHz reference crystal */
> 


-- 
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html