Re: [PATCH v4 34/42] ARM: dts: add Cirrus EP93XX SoC .dtsi

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 15/09/2023 10:11, Nikita Shubin via B4 Relay wrote:
> From: Nikita Shubin <nikita.shubin@maquefel.me>
> 
> Add support for Cirrus Logic EP93XX SoC's family.
> 
> Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
> ---
>  arch/arm/boot/dts/cirrus/ep93xx.dtsi | 454 +++++++++++++++++++++++++++++++++++
>  1 file changed, 454 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
> new file mode 100644
> index 000000000000..11ca6d6a190d
> --- /dev/null
> +++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
> @@ -0,0 +1,454 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree file for Cirrus Logic systems EP93XX SoC
> + */
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/clock/cirrus,ep9301-clk.h>
> +/ {
> +	soc: soc {
> +		compatible = "simple-bus";
> +		ranges;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		syscon: syscon@80930000 {
> +			compatible = "cirrus,ep9301-syscon",
> +						 "syscon", "simple-mfd";

Odd indentation. Please align with opening "

> +			reg = <0x80930000 0x1000>;
> +
> +			eclk: clock-controller {
> +				compatible = "cirrus,ep9301-clk";
> +				#clock-cells = <1>;
> +				clocks = <&xtali>;
> +			};
> +
> +			pinctrl: pinctrl {
> +				compatible = "cirrus,ep9301-pinctrl";
> +
> +				spi_default_pins: pins-spi {
> +					function = "spi";
> +					groups = "ssp";

Please include one such entry in your bindings example, so it will be
validated. It would also help you in review - you would not get a
comment that pinctrl node is not used :/

> +				};
> +
> +				ac97_default_pins: pins-ac97 {
> +					function = "ac97";
> +					groups = "ac97";
> +				};
> +
> +				i2s_on_ssp_pins: pins-i2sonssp {
> +					function = "i2s";
> +					groups = "i2s_on_ssp";
> +				};
> +
> +				i2s_on_ac97_pins: pins-i2sonac97 {
> +					function = "i2s";
> +					groups = "i2s_on_ac97";
> +				};
> +
> +				gpio1_default_pins: pins-gpio1 {
> +					function = "gpio";
> +					groups = "gpio1agrp";
> +				};
> +
> +				pwm1_default_pins: pins-pwm1 {
> +					function = "pwm";
> +					groups = "pwm1";
> +				};
> +
> +				gpio2_default_pins: pins-gpio2 {
> +					function = "gpio";
> +					groups = "gpio2agrp";
> +				};
> +
> +				gpio3_default_pins: pins-gpio3 {
> +					function = "gpio";
> +					groups = "gpio3agrp";
> +				};
> +
> +				keypad_default_pins: pins-keypad {
> +					function = "keypad";
> +					groups = "keypadgrp";
> +				};
> +
> +				gpio4_default_pins: pins-gpio4 {
> +					function = "gpio";
> +					groups = "gpio4agrp";
> +				};
> +
> +				gpio6_default_pins: pins-gpio6 {
> +					function = "gpio";
> +					groups = "gpio6agrp";
> +				};
> +
> +				gpio7_default_pins: pins-gpio7 {
> +					function = "gpio";
> +					groups = "gpio7agrp";
> +				};
> +
> +				ide_default_pins: pins-ide {
> +					function = "pata";
> +					groups = "idegrp";
> +				};
> +
> +				lcd_on_dram0_pins: pins-rasteronsdram0 {
> +					function = "lcd";
> +					groups = "rasteronsdram0grp";
> +				};
> +
> +				lcd_on_dram3_pins: pins-rasteronsdram3 {
> +					function = "lcd";
> +					groups = "rasteronsdram3grp";
> +				};
> +			};
> +
> +			reboot {
> +				compatible = "cirrus,ep9301-reboot";
> +			};
> +		};
> +
> +		adc: adc@80900000 {
> +			compatible = "cirrus,ep9301-adc";
> +			reg = <0x80900000 0x28>;
> +			clocks = <&eclk EP93XX_CLK_ADC>;
> +			interrupt-parent = <&vic0>;
> +			interrupts = <30>;
> +			status = "disabled";
> +		};
> +
> +		/*
> +		 * The EP93XX expansion bus is a set of up to 7 each up to 16MB
> +		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
> +		 * But since we don't require to setup it in any way, we can
> +		 * represent it as a simple-bus.
> +		 */
> +		ebi: bus@80080000 {
> +			compatible = "simple-bus";
> +			reg = <0x80080000 0x20>;
> +			native-endian;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +		};
> +
> +		dma0: dma-controller@80000000 {
> +			compatible = "cirrus,ep9301-dma-m2p";
> +			reg = <0x80000000 0x0040>,
> +			      <0x80000040 0x0040>,
> +			      <0x80000080 0x0040>,
> +			      <0x800000c0 0x0040>,
> +			      <0x80000240 0x0040>,
> +			      <0x80000200 0x0040>,
> +			      <0x800002c0 0x0040>,
> +			      <0x80000280 0x0040>,
> +			      <0x80000340 0x0040>,
> +			      <0x80000300 0x0040>;
> +			clocks = <&eclk EP93XX_CLK_M2P0>,
> +				 <&eclk EP93XX_CLK_M2P1>,
> +				 <&eclk EP93XX_CLK_M2P2>,
> +				 <&eclk EP93XX_CLK_M2P3>,
> +				 <&eclk EP93XX_CLK_M2P4>,
> +				 <&eclk EP93XX_CLK_M2P5>,
> +				 <&eclk EP93XX_CLK_M2P6>,
> +				 <&eclk EP93XX_CLK_M2P7>,
> +				 <&eclk EP93XX_CLK_M2P8>,
> +				 <&eclk EP93XX_CLK_M2P9>;
> +			clock-names = "m2p0", "m2p1",
> +				      "m2p2", "m2p3",
> +				      "m2p4", "m2p5",
> +				      "m2p6", "m2p7",
> +				      "m2p8", "m2p9";
> +			interrupt-parent = <&vic0>;
> +			interrupts = <7>, <8>, <9>, <10>, <11>,
> +				<12>, <13>, <14>, <15>, <16>;
> +			#dma-cells = <1>;
> +		};
> +
> +		dma1: dma-controller@80000100 {
> +			compatible = "cirrus,ep9301-dma-m2m";
> +			reg = <0x80000100 0x0040>,
> +			      <0x80000140 0x0040>;
> +			clocks = <&eclk EP93XX_CLK_M2M0>,
> +				 <&eclk EP93XX_CLK_M2M1>;
> +			clock-names = "m2m0", "m2m1";
> +			interrupt-parent = <&vic0>;
> +			interrupts = <17>, <18>;
> +			#dma-cells = <1>;
> +		};
> +
> +		eth0: ethernet@80010000 {
> +			compatible = "cirrus,ep9301-eth";
> +			reg = <0x80010000 0x10000>;
> +			interrupt-parent = <&vic1>;
> +			interrupts = <7>;
> +			mdio0: mdio {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
> +		gpio0: gpio@80840000 {
> +			compatible = "cirrus,ep9301-gpio";
> +			reg = <0x80840000 0x04>,
> +			      <0x80840010 0x04>,
> +			      <0x80840090 0x1c>;
> +			reg-names = "data", "dir", "intr";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			interrupt-parent = <&vic1>;
> +			interrupts = <27>;
> +		};
> +
> +		gpio1: gpio@80840004 {
> +			compatible = "cirrus,ep9301-gpio";
> +			reg = <0x80840004 0x04>,
> +			      <0x80840014 0x04>,
> +			      <0x808400ac 0x1c>;
> +			reg-names = "data", "dir", "intr";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			interrupt-parent = <&vic1>;
> +			interrupts = <27>;
> +		};
> +
> +		gpio2: gpio@80840008 {
> +			compatible = "cirrus,ep9301-gpio";
> +			reg = <0x80840008 0x04>,
> +			      <0x80840018 0x04>;
> +			reg-names = "data", "dir";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&gpio2_default_pins>;
> +			status = "disabled";

Why this node is disabled? Any dependencies/resources missing? Similar
questions to other gpio nodes.



Best regards,
Krzysztof