From: Krzysztof Kozlowski <krzk@kernel.org>
To: Alexander Dahl <ada@thorsis.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v2 01/16] dt-bindings: clock: at91: Split up per SoC partially
Date: Mon, 10 Feb 2025 18:05:31 +0100 [thread overview]
Message-ID: <a199849a-ca36-439d-8246-7addd9a78833@kernel.org> (raw)
In-Reply-To: <20250210164506.495747-2-ada@thorsis.com>
On 10/02/2025 17:44, Alexander Dahl wrote:
> Before adding even more new indexes creating more holes in the
> clk at91 drivers pmc_data->chws arrays, split this up.
>
> This is a partial split up only for SoCs affected by upcoming changes
> and by that PMC_MAIN + x hack, others could follow by the same scheme.
>
> Binding splitup was proposed for several reasons:
>
> 1) keep the driver code simple, readable, and efficient
> 2) avoid accidental array index duplication
> 3) avoid memory waste by creating more and more unused array members.
>
> Old values are kept to not break dts, and to maintain dt ABI.
>
> Link: https://lore.kernel.org/linux-devicetree/20250207-jailbird-circus-bcc04ee90e05@thorsis.com/T/#u
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
>
> Notes:
> v2:
> - new patch, not present in v1
>
> .../dt-bindings/clock/microchip,sam9x60-pmc.h | 19 +++++++++++
> .../dt-bindings/clock/microchip,sam9x7-pmc.h | 25 +++++++++++++++
> .../clock/microchip,sama7d65-pmc.h | 32 +++++++++++++++++++
> .../dt-bindings/clock/microchip,sama7g5-pmc.h | 24 ++++++++++++++
> 4 files changed, 100 insertions(+)
> create mode 100644 include/dt-bindings/clock/microchip,sam9x60-pmc.h
> create mode 100644 include/dt-bindings/clock/microchip,sam9x7-pmc.h
> create mode 100644 include/dt-bindings/clock/microchip,sama7d65-pmc.h
> create mode 100644 include/dt-bindings/clock/microchip,sama7g5-pmc.h
>
> diff --git a/include/dt-bindings/clock/microchip,sam9x60-pmc.h b/include/dt-bindings/clock/microchip,sam9x60-pmc.h
> new file mode 100644
> index 0000000000000..e01e867e8c4da
> --- /dev/null
> +++ b/include/dt-bindings/clock/microchip,sam9x60-pmc.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * The constants defined in this header are being used in dts and in
> + * at91 sam9x60 clock driver.
> + */
> +
> +#ifndef _DT_BINDINGS_CLOCK_MICROCHIP_SAM9X60_PMC_H
> +#define _DT_BINDINGS_CLOCK_MICROCHIP_SAM9X60_PMC_H
> +
> +#include <dt-bindings/clock/at91.h>
> +
> +/* old from before bindings splitup */
> +#define SAM9X60_PMC_MCK PMC_MCK /* 1 */
> +#define SAM9X60_PMC_UTMI PMC_UTMI /* 2 */
> +#define SAM9X60_PMC_MAIN PMC_MAIN /* 3 */
> +
> +#define SAM9X60_PMC_PLLACK PMC_PLLACK /* 7 */
IIUC, you want to have bindings per SoC, so why not adding proper
constants here instead of including entire old binding header? The
binding header should be entirely abandoned later.
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-02-10 17:05 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-10 16:44 [PATCH v2 00/16] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 01/16] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2025-02-10 17:05 ` Krzysztof Kozlowski [this message]
2025-02-11 7:16 ` Alexander Dahl
2025-02-11 7:47 ` Krzysztof Kozlowski
2025-02-17 9:11 ` Claudiu Beznea
2025-02-17 9:47 ` Alexander Dahl
2025-02-19 8:51 ` Claudiu Beznea
2025-02-19 9:08 ` Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 02/16] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 03/16] clk: at91: " Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 04/16] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2025-02-10 17:07 ` Krzysztof Kozlowski
2025-02-11 7:26 ` Alexander Dahl
2025-02-11 8:01 ` Krzysztof Kozlowski
2025-02-10 16:44 ` [PATCH v2 05/16] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 06/16] clk: at91: Add peripheral id for OTPC Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 07/16] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2025-02-12 9:13 ` Krzysztof Kozlowski
2025-02-10 16:44 ` [PATCH v2 08/16] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2025-02-10 16:59 ` Krzysztof Kozlowski
2025-02-11 7:05 ` Alexander Dahl
2025-02-11 7:50 ` Krzysztof Kozlowski
2025-02-10 16:50 ` [PATCH v2 09/16] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2025-02-11 6:47 ` Greg Kroah-Hartman
2025-02-17 9:10 ` Claudiu Beznea
2025-02-11 6:52 ` [PATCH v2 10/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2025-02-11 6:52 ` [PATCH v2 11/16] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2025-02-11 6:52 ` [PATCH v2 12/16] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2025-02-17 9:10 ` [PATCH v2 10/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Claudiu Beznea
2025-02-11 6:53 ` [PATCH v2 13/16] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2025-02-11 6:53 ` [PATCH v2 14/16] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2025-02-11 6:53 ` [PATCH v2 15/16] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2025-02-17 9:10 ` Claudiu Beznea
2025-02-11 6:53 ` [PATCH v2 16/16] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2025-02-17 9:10 ` [PATCH v2 13/16] ARM: dts: microchip: sam9x60: Add OTPC node Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a199849a-ca36-439d-8246-7addd9a78833@kernel.org \
--to=krzk@kernel.org \
--cc=ada@thorsis.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).