Re: [PATCH v2 7/7] ASoC: dt-bindings: mediatek,mt8188-afe: add audio properties

["Trevor Wu (吳文良)" <Trevor.Wu@mediatek.com>]

On Fri, 2023-04-21 at 18:43 +0200, Krzysztof Kozlowski wrote:
> On 21/04/2023 12:09, Trevor Wu wrote:
> > Assign top_a1sys_hp clock to 26M, and add apll1_d4 to clocks for
> > switching
> > the parent of top_a1sys_hp dynamically
> > On the other hand, "mediatek,infracfg" is included for bus
> > protection.
> > 
> > Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
> > ---
> >  .../bindings/sound/mediatek,mt8188-afe.yaml      | 16
> > ++++++++++++++--
> >  1 file changed, 14 insertions(+), 2 deletions(-)
> > 
> > diff --git
> > a/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
> > b/Documentation/devicetree/bindings/sound/mediatek,mt8188-afe.yaml
> > index 82ccb32f08f2..812e0702ca36 100644
> > --- a/Documentation/devicetree/bindings/sound/mediatek,mt8188-
> > afe.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8188-
> > afe.yaml
> > @@ -29,6 +29,10 @@ properties:
> >      $ref: /schemas/types.yaml#/definitions/phandle
> >      description: The phandle of the mediatek topckgen controller
> > 
> > +  mediatek,infracfg:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: The phandle of the mediatek infracfg controller
> > +
> >    power-domains:
> >      maxItems: 1
> > 
> > @@ -52,6 +56,7 @@ properties:
> >        - description: mux for i2si1_mck
> >        - description: mux for i2si2_mck
> >        - description: audio 26m clock
> > +      - description: audio pll1 divide 4
> > 
> >    clock-names:
> >      items:
> > @@ -73,6 +78,7 @@ properties:
> >        - const: i2si1_m_sel
> >        - const: i2si2_m_sel
> >        - const: adsp_audio_26m
> > +      - const: apll1_d4
> > 
> >    mediatek,etdm-in1-cowork-source:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > @@ -147,6 +153,8 @@ required:
> >    - power-domains
> >    - clocks
> >    - clock-names
> > +  - assigned-clocks
> > +  - assigned-clock-parents
> 
> You were explaining it last time, but it did not solve my concerns.
> Requiring these properties means that your hardware boots with
> incorrect
> clock parents, including result of any firmware, and there is no way
> it
> can correctly work without reparenting. What's more, this means that
> your clock hierarchy does not include these clocks for some reason,
> e.g.
> you need to reparent parents of some parent of your clock input,
> otherwise device cannot work. Cannot work never ever.
> 
> Is this the case?

Thanks for your detailed explanation.
I just tried to initialize the clock to another clock parent for power
saving, so this is not the case. In other words, it's not a "must be"
property. I will remove them in V3.

Thanks,
Trevor

> 
> Have in mind that bindings are used also by other OS and projects,
> like
> bootloaders, firmware etc.
> 
> Best regards,
> Krzysztof
>