* [PATCH v16 2/3] dt-bindings: usb: Add analogix anx7411 PD binding [not found] <20220712090534.2783494-1-xji@analogixsemi.com> @ 2022-07-12 9:05 ` Xin Ji 2022-07-12 9:38 ` Krzysztof Kozlowski 0 siblings, 1 reply; 3+ messages in thread From: Xin Ji @ 2022-07-12 9:05 UTC (permalink / raw) To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski, Xin Ji Cc: bliang, qwen, jli, Rob Herring, linux-usb, devicetree, linux-kernel Add analogix PD chip anx7411 device binding Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Xin Ji <xji@analogixsemi.com> --- v13 -> v14 : 1. Fix Robot compile error. Fix node name not correct. 2. Change HEX to lowercase. 3. Use "ports" property. v12 -> v13 : 1. Drop the quotes for "$id" and "$schema" 2. Remove "allOf" label 3. Change node name from "i2c1" to "i2c" 4. Change node name from "typec" to "usb-typec" Signed-off-by: Xin Ji <xji@analogixsemi.com> --- .../bindings/usb/analogix,anx7411.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml new file mode 100644 index 000000000000..bbd071ba338f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7411 Type-C controller bindings + +maintainers: + - Xin Ji <xji@analogixsemi.com> + +properties: + compatible: + enum: + - analogix,anx7411 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + $ref: ../connector/usb-connector.yaml + description: + Properties for usb c connector. + + properties: + compatible: + const: usb-c-connector + + power-role: true + + data-role: true + + try-power-role: true + + required: + - compatible + +required: + - compatible + - reg + - connector + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7411@2c { + compatible = "analogix,anx7411"; + reg = <0x2c>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio0>; + + typec_con: connector { + compatible = "usb-c-connector"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "source"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + typec_con_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; + }; +... -- 2.25.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v16 2/3] dt-bindings: usb: Add analogix anx7411 PD binding 2022-07-12 9:05 ` [PATCH v16 2/3] dt-bindings: usb: Add analogix anx7411 PD binding Xin Ji @ 2022-07-12 9:38 ` Krzysztof Kozlowski 2022-07-13 6:11 ` Xin Ji 0 siblings, 1 reply; 3+ messages in thread From: Krzysztof Kozlowski @ 2022-07-12 9:38 UTC (permalink / raw) To: Xin Ji, Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski Cc: bliang, qwen, jli, Rob Herring, linux-usb, devicetree, linux-kernel On 12/07/2022 11:05, Xin Ji wrote: > Add analogix PD chip anx7411 device binding > > Reviewed-by: Rob Herring <robh@kernel.org> > Signed-off-by: Xin Ji <xji@analogixsemi.com> > > --- > v13 -> v14 : > 1. Fix Robot compile error. Fix node name not correct. Node name is still not correct. > 2. Change HEX to lowercase. > 3. Use "ports" property. > v12 -> v13 : > 1. Drop the quotes for "$id" and "$schema" > 2. Remove "allOf" label > 3. Change node name from "i2c1" to "i2c" > 4. Change node name from "typec" to "usb-typec" > > Signed-off-by: Xin Ji <xji@analogixsemi.com> > --- > .../bindings/usb/analogix,anx7411.yaml | 81 +++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > > diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > new file mode 100644 > index 000000000000..bbd071ba338f > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > @@ -0,0 +1,81 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/analogix,anx7411.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analogix ANX7411 Type-C controller bindings > + > +maintainers: > + - Xin Ji <xji@analogixsemi.com> > + > +properties: > + compatible: > + enum: > + - analogix,anx7411 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + connector: > + type: object > + $ref: ../connector/usb-connector.yaml > + description: > + Properties for usb c connector. > + > + properties: > + compatible: > + const: usb-c-connector > + > + power-role: true > + > + data-role: true > + > + try-power-role: true > + > + required: > + - compatible > + > +required: > + - compatible > + - reg > + - connector > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + anx7411@2c { Use generic node name: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "analogix,anx7411"; > + reg = <0x2c>; > + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > + interrupt-parent = <&gpio0>; > + > + typec_con: connector { > + compatible = "usb-c-connector"; > + power-role = "dual"; > + data-role = "dual"; > + try-power-role = "source"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + typec_con_ep: endpoint { > + remote-endpoint = <&usbotg_hs_ep>; > + }; > + }; > + }; > + }; > + }; > + }; > +... Best regards, Krzysztof ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v16 2/3] dt-bindings: usb: Add analogix anx7411 PD binding 2022-07-12 9:38 ` Krzysztof Kozlowski @ 2022-07-13 6:11 ` Xin Ji 0 siblings, 0 replies; 3+ messages in thread From: Xin Ji @ 2022-07-13 6:11 UTC (permalink / raw) To: Krzysztof Kozlowski Cc: bliang, qwen, jli, Rob Herring, linux-usb, devicetree, linux-kernel On Tue, Jul 12, 2022 at 11:38:47AM +0200, Krzysztof Kozlowski wrote: > On 12/07/2022 11:05, Xin Ji wrote: > > Add analogix PD chip anx7411 device binding > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > Signed-off-by: Xin Ji <xji@analogixsemi.com> > > > > --- > > v13 -> v14 : > > 1. Fix Robot compile error. Fix node name not correct. > > Node name is still not correct. Hi Krzysztof, I'll add it. Thanks, Xin > > > 2. Change HEX to lowercase. > > 3. Use "ports" property. > > v12 -> v13 : > > 1. Drop the quotes for "$id" and "$schema" > > 2. Remove "allOf" label > > 3. Change node name from "i2c1" to "i2c" > > 4. Change node name from "typec" to "usb-typec" > > > > Signed-off-by: Xin Ji <xji@analogixsemi.com> > > --- > > .../bindings/usb/analogix,anx7411.yaml | 81 +++++++++++++++++++ > > 1 file changed, 81 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > > > > diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > > new file mode 100644 > > index 000000000000..bbd071ba338f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml > > @@ -0,0 +1,81 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fanalogix%2Canx7411.yaml%23&data=05%7C01%7Cxji%40analogixsemi.com%7Ccaae32a981aa4c347a8e08da63ea5518%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637932155353583707%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=BGHo5E1W33sWfdhApWzq94%2F5TrDvfQc5lVF%2FSWl2m5A%3D&reserved=0 > > +$schema: https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7Cxji%40analogixsemi.com%7Ccaae32a981aa4c347a8e08da63ea5518%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637932155353583707%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=7wG732uVpVNVjtxm14xiXKweazjop4xRTUe4HRZVTWM%3D&reserved=0 > > + > > +title: Analogix ANX7411 Type-C controller bindings > > + > > +maintainers: > > + - Xin Ji <xji@analogixsemi.com> > > + > > +properties: > > + compatible: > > + enum: > > + - analogix,anx7411 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + connector: > > + type: object > > + $ref: ../connector/usb-connector.yaml > > + description: > > + Properties for usb c connector. > > + > > + properties: > > + compatible: > > + const: usb-c-connector > > + > > + power-role: true > > + > > + data-role: true > > + > > + try-power-role: true > > + > > + required: > > + - compatible > > + > > +required: > > + - compatible > > + - reg > > + - connector > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + i2c { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + anx7411@2c { > > Use generic node name: > https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdevicetree-specification.readthedocs.io%2Fen%2Flatest%2Fchapter2-devicetree-basics.html%23generic-names-recommendation&data=05%7C01%7Cxji%40analogixsemi.com%7Ccaae32a981aa4c347a8e08da63ea5518%7Cb099b0b4f26c4cf59a0fd5be9acab205%7C0%7C0%7C637932155353583707%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=ACf4IGwVwtO7CsvL%2BYj4bbl%2BG88o5k6PyEyxZCl2as8%3D&reserved=0 > > > + compatible = "analogix,anx7411"; > > + reg = <0x2c>; > > + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > > + interrupt-parent = <&gpio0>; > > + > > + typec_con: connector { > > + compatible = "usb-c-connector"; > > + power-role = "dual"; > > + data-role = "dual"; > > + try-power-role = "source"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + typec_con_ep: endpoint { > > + remote-endpoint = <&usbotg_hs_ep>; > > + }; > > + }; > > + }; > > + }; > > + }; > > + }; > > +... > > > Best regards, > Krzysztof ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-07-13 6:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220712090534.2783494-1-xji@analogixsemi.com>
2022-07-12 9:05 ` [PATCH v16 2/3] dt-bindings: usb: Add analogix anx7411 PD binding Xin Ji
2022-07-12 9:38 ` Krzysztof Kozlowski
2022-07-13 6:11 ` Xin Ji
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).