From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kishon Vijay Abraham I Subject: Re: [PATCH V2 0/5] phy: bcm-ns-usb3: add MDIO driver Date: Fri, 16 Jun 2017 12:06:21 +0530 Message-ID: References: <20170511132925.14564-1-zajec5@gmail.com> <20170608200428.9187-1-zajec5@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20170608200428.9187-1-zajec5@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= Cc: Yendapally Reddy Dhananjaya Reddy , Jon Mason , Florian Fainelli , linux-arm-kernel@lists.infradead.org, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= List-Id: devicetree@vger.kernel.org On Friday 09 June 2017 01:34 AM, Rafał Miłecki wrote: > From: Rafał Miłecki > > As explained in the commit 9200c6f177638 ("Revert "phy: Add USB3 PHY support > for Broadcom NSP SoC"") this module should be modified to use MDIO bus as > this is how PHY is really attached. > > This should allow reusing this driver on NSP and any other platform with > MDIO bus and this particular PHY. can you run checkpatch and fix all warnings in this series? Thanks Kishon > > V2: Rebase and update 4/5 and 5/5. > > Rafał Miłecki (5): > phy: bcm-ns-usb3: always wait for idle after writing to the PHY reg > phy: bcm-ns-usb3: use pointer for PHY writing function > phy: bcm-ns-usb3: enable MDIO in the platform specific code > dt-bindings: phy: Modify Broadcom NS USB 3.0 PHY binding to use MDIO > phy: bcm-ns-usb3: add MDIO driver using proper bus layer > > .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 27 ++- > drivers/phy/broadcom/Kconfig | 1 + > drivers/phy/broadcom/phy-bcm-ns-usb3.c | 230 +++++++++++++++------ > 3 files changed, 186 insertions(+), 72 deletions(-) >