From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Subject: Re: [PATCH v5 12/13] ARM: dts: ipq8074: Add pcie nodes Date: Mon, 2 Apr 2018 12:05:12 +0530 Message-ID: References: <1521800336-19266-1-git-send-email-sricharan@codeaurora.org> <1521800336-19266-13-git-send-email-sricharan@codeaurora.org> <20180327174621.GO1403@tuxbook-pro> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180327174621.GO1403@tuxbook-pro> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Bjorn Andersson Cc: mark.rutland@arm.com, robh@kernel.org, devicetree@vger.kernel.org, marc.zyngier@arm.com, catalin.marinas@arm.com, richardcochran@gmail.com, will.deacon@arm.com, linux@armlinux.org.uk, linux-kernel@vger.kernel.org, david.brown@linaro.org, absahu@codeaurora.org, robh+dt@kernel.org, linux-arm-msm@vger.kernel.org, andy.gross@linaro.org, linux-soc@vger.kernel.org, sboyd@codeaurora.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On 3/27/2018 11:16 PM, Bjorn Andersson wrote: > On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote: > >> The driver/phy support for ipq8074 is available now. >> So enabling the nodes in DT. >> > > Acked-by: Bjorn Andersson > Thanks. Regards, Sricharan > Regards, > Bjorn > >> Reviewed-by: Abhishek Sahu >> Signed-off-by: Sricharan R >> --- >> arch/arm64/boot/dts/qcom/ipq8074.dtsi | 157 +++++++++++++++++++++++++++++++++- >> 1 file changed, 156 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi >> index a8dbbf0..caf3485 100644 >> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi >> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi >> @@ -24,7 +24,7 @@ >> ranges = <0 0 0 0xffffffff>; >> compatible = "simple-bus"; >> >> - pinctrl@1000000 { >> + tlmm: pinctrl@1000000 { >> compatible = "qcom,ipq8074-pinctrl"; >> reg = <0x1000000 0x300000>; >> interrupts = ; >> @@ -229,6 +229,161 @@ >> dma-names = "tx", "rx", "cmd"; >> status = "disabled"; >> }; >> + >> + pcie_phy0: phy@86000 { >> + compatible = "qcom,ipq8074-qmp-pcie-phy"; >> + reg = <0x86000 0x1000>; >> + #phy-cells = <0>; >> + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; >> + clock-names = "pipe_clk"; >> + clock-output-names = "pcie20_phy0_pipe_clk"; >> + >> + resets = <&gcc GCC_PCIE0_PHY_BCR>, >> + <&gcc GCC_PCIE0PHY_PHY_BCR>; >> + reset-names = "phy", >> + "common"; >> + status = "disabled"; >> + }; >> + >> + pcie0: pci@20000000 { >> + compatible = "qcom,pcie-ipq8074"; >> + reg = <0x20000000 0xf1d >> + 0x20000f20 0xa8 >> + 0x80000 0x2000 >> + 0x20100000 0x1000>; >> + reg-names = "dbi", "elbi", "parf", "config"; >> + device_type = "pci"; >> + linux,pci-domain = <0>; >> + bus-range = <0x00 0xff>; >> + num-lanes = <1>; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + >> + phys = <&pcie_phy0>; >> + phy-names = "pciephy"; >> + >> + ranges = <0x81000000 0 0x20200000 0x20200000 >> + 0 0x100000 /* downstream I/O */ >> + 0x82000000 0 0x20300000 0x20300000 >> + 0 0xd00000>; /* non-prefetchable memory */ >> + >> + interrupts = ; >> + interrupt-names = "msi"; >> + #interrupt-cells = <1>; >> + interrupt-map-mask = <0 0 0 0x7>; >> + interrupt-map = <0 0 0 1 &intc 0 75 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ >> + <0 0 0 2 &intc 0 78 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ >> + <0 0 0 3 &intc 0 79 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ >> + <0 0 0 4 &intc 0 83 >> + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ >> + >> + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, >> + <&gcc GCC_PCIE0_AXI_M_CLK>, >> + <&gcc GCC_PCIE0_AXI_S_CLK>, >> + <&gcc GCC_PCIE0_AHB_CLK>, >> + <&gcc GCC_PCIE0_AUX_CLK>; >> + >> + clock-names = "iface", >> + "axi_m", >> + "axi_s", >> + "ahb", >> + "aux"; >> + resets = <&gcc GCC_PCIE0_PIPE_ARES>, >> + <&gcc GCC_PCIE0_SLEEP_ARES>, >> + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, >> + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, >> + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, >> + <&gcc GCC_PCIE0_AHB_ARES>, >> + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; >> + reset-names = "pipe", >> + "sleep", >> + "sticky", >> + "axi_m", >> + "axi_s", >> + "ahb", >> + "axi_m_sticky"; >> + status = "disabled"; >> + }; >> + >> + pcie_phy1: phy@8e000 { >> + compatible = "qcom,ipq8074-qmp-pcie-phy"; >> + reg = <0x8e000 0x1000>; >> + #phy-cells = <0>; >> + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; >> + clock-names = "pipe_clk"; >> + clock-output-names = "pcie20_phy1_pipe_clk"; >> + >> + resets = <&gcc GCC_PCIE1_PHY_BCR>, >> + <&gcc GCC_PCIE1PHY_PHY_BCR>; >> + reset-names = "phy", >> + "common"; >> + status = "disabled"; >> + }; >> + >> + pcie1: pci@10000000 { >> + compatible = "qcom,pcie-ipq8074"; >> + reg = <0x10000000 0xf1d >> + 0x10000f20 0xa8 >> + 0x88000 0x2000 >> + 0x10100000 0x1000>; >> + reg-names = "dbi", "elbi", "parf", "config"; >> + device_type = "pci"; >> + linux,pci-domain = <1>; >> + bus-range = <0x00 0xff>; >> + num-lanes = <1>; >> + #address-cells = <3>; >> + #size-cells = <2>; >> + >> + phys = <&pcie_phy1>; >> + phy-names = "pciephy"; >> + >> + ranges = <0x81000000 0 0x10200000 0x10200000 >> + 0 0x100000 /* downstream I/O */ >> + 0x82000000 0 0x10300000 0x10300000 >> + 0 0xd00000>; /* non-prefetchable memory */ >> + >> + interrupts = ; >> + interrupt-names = "msi"; >> + #interrupt-cells = <1>; >> + interrupt-map-mask = <0 0 0 0x7>; >> + interrupt-map = <0 0 0 1 &intc 0 142 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ >> + <0 0 0 2 &intc 0 143 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ >> + <0 0 0 3 &intc 0 144 >> + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ >> + <0 0 0 4 &intc 0 145 >> + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ >> + >> + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, >> + <&gcc GCC_PCIE1_AXI_M_CLK>, >> + <&gcc GCC_PCIE1_AXI_S_CLK>, >> + <&gcc GCC_PCIE1_AHB_CLK>, >> + <&gcc GCC_PCIE1_AUX_CLK>; >> + clock-names = "iface", >> + "axi_m", >> + "axi_s", >> + "ahb", >> + "aux"; >> + resets = <&gcc GCC_PCIE1_PIPE_ARES>, >> + <&gcc GCC_PCIE1_SLEEP_ARES>, >> + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, >> + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, >> + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, >> + <&gcc GCC_PCIE1_AHB_ARES>, >> + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; >> + reset-names = "pipe", >> + "sleep", >> + "sticky", >> + "axi_m", >> + "axi_s", >> + "ahb", >> + "axi_m_sticky"; >> + status = "disabled"; >> + }; >> }; >> >> cpus { >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation >> > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- "QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation