From: Florian Fainelli <f.fainelli@gmail.com>
To: "Rafał Miłecki" <zajec5@gmail.com>,
"Florian Fainelli" <f.fainelli@gmail.com>
Cc: "Catalin Marinas" <catalin.marinas@arm.com>,
"Will Deacon" <will@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
"Rafał Miłecki" <rafal@milecki.pl>
Subject: Re: [PATCH V2 2/2] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files
Date: Tue, 10 Nov 2020 17:04:25 -0800 [thread overview]
Message-ID: <a4a1d02f-c950-62ab-fb49-b5819cf1cd11@gmail.com> (raw)
In-Reply-To: <20201105085458.21121-2-zajec5@gmail.com>
On 11/5/2020 12:54 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> They don't descibe hardware fully yet but it's enough to boot a system.
>
> Some missing blocks:
> 1. PMC (Power Management Controller?)
> 2. Ethernet
> 3. Crypto
> 4. Thermal
>
> Asus DTS is missing defining full NAND partitions layout and buttons.
>
> Further changes will fill those gaps as soon as required bindings will
> be found / tested / added.
>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
We would need a board/SoC binding document under
Documentation/devicetree/bindings/arm/bcm/ which describes the 4908 SoC
and its possible boards at least.
[snip]
h
> +
> +&nandcs {
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> + nand-on-flash-bbt;
> + brcm,nand-has-wp;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "cferom";
> + reg = <0x000000000000 0x000000100000>;
You can probably trim the leading zeroes.
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> new file mode 100644
> index 000000000000..3bbefc86b978
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
> @@ -0,0 +1,188 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/dts-v1/;
> +
> +/ {
> + interrupt-parent = <&gic>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + bootargs = "earlycon=bcm63xx_uart,0xff800640";
We talked about it before, but the earlycon should be dropped from the
.dtsi file, it does not really belong there.
The rest looks good to me!
--
Florian
next prev parent reply other threads:[~2020-11-11 1:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-05 8:54 [PATCH V2 1/2] arm64: add config for Broadcom BCM4908 SoCs Rafał Miłecki
2020-11-05 8:54 ` [PATCH V2 2/2] arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files Rafał Miłecki
2020-11-11 1:04 ` Florian Fainelli [this message]
2020-11-11 5:59 ` Rafał Miłecki
2020-11-11 15:33 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a4a1d02f-c950-62ab-fb49-b5819cf1cd11@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=will@kernel.org \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).