Re: [PATCH v2 1/1] arm64: dts: mt8192: Add mmc device nodes

[Matthias Brugger <matthias.bgg@gmail.com>]

On 07/04/2022 13:37, Allen-KH Cheng wrote:
> In mt8192 SoC, mmc driver dose not use the MSDC module to control
> clock. It will read/write register to enable/disable clock. Also
> there is no other device of mt8192 using MSDC controller.
> 
> We add mmc nodes for mt8192 SoC and remove the clock-controller in
> dts for avoid a duplicate unit-address(11f60000) warning.
> 

Applied, thanks!

Matthias

> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34 +++++++++++++++++++++---
>   1 file changed, 30 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> index a6da7b04b9d4..18a58239d6f1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> @@ -985,10 +985,36 @@
>   			#clock-cells = <1>;
>   		};
>   
> -		msdc: clock-controller@11f60000 {
> -			compatible = "mediatek,mt8192-msdc";
> -			reg = <0 0x11f60000 0 0x1000>;
> -			#clock-cells = <1>;
> +		mmc0: mmc@11f60000 {
> +			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
> +			reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>;
> +			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> +				 <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
> +				 <&msdc_top CLK_MSDC_TOP_SRC_0P>,
> +				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
> +				 <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
> +				 <&msdc_top CLK_MSDC_TOP_AXI>,
> +				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
> +			clock-names = "source", "hclk", "source_cg", "sys_cg",
> +				      "pclk_cg", "axi_cg", "ahb_cg";
> +			status = "disabled";
> +		};
> +
> +		mmc1: mmc@11f70000 {
> +			compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
> +			reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
> +			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> +				 <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
> +				 <&msdc_top CLK_MSDC_TOP_SRC_1P>,
> +				 <&msdc_top CLK_MSDC_TOP_P_CFG>,
> +				 <&msdc_top CLK_MSDC_TOP_P_MSDC1>,
> +				 <&msdc_top CLK_MSDC_TOP_AXI>,
> +				 <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
> +			clock-names = "source", "hclk", "source_cg", "sys_cg",
> +				      "pclk_cg", "axi_cg", "ahb_cg";
> +			status = "disabled";
>   		};
>   
>   		mfgcfg: clock-controller@13fbf000 {