Re: [PATCH v2 1/3] dt-bindings: mediatek: add vdosys1 RDMA definition for mt8195

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 09/05/2022 06:43, Rex-BC Chen wrote:
> From: "Nancy.Lin" <nancy.lin@mediatek.com>
> 
> Add vdosys1 RDMA definition.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../display/mediatek/mediatek,mdp-rdma.yaml   | 94 +++++++++++++++++++
>  1 file changed, 94 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
> new file mode 100644
> index 000000000000..ca31accb0a95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MediaTek MDP RDMA
> +
> +maintainers:
> +  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
> +  - Philipp Zabel <p.zabel@pengutronix.de>
> +
> +description:
> +  The MediaTek MDP RDMA stands for Read Direct Memory Access.
> +  It provides real time data to the back-end panel driver, such as DSI,
> +  DPI and DP_INTF.
> +  It contains one line buffer to store the sufficient pixel data.
> +  RDMA device node must be siblings to the central MMSYS_CONFIG node.
> +  For a description of the MMSYS_CONFIG binding, see
> +  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
> +
> +properties:
> +  compatible:
> +    oneOf:

oneOf is not needed

> +      - items:

items not needed, you have only one item.

> +          - const: mediatek,mt8195-vdo1-rdma
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  power-domains:
> +    description: A phandle and PM domain specifier as defined by bindings of
> +      the power controller specified by phandle. See
> +      Documentation/devicetree/bindings/power/power-domain.yaml for details.

Skip description, it's obvious. Instead maxItems.

> +
> +  clocks:
> +    items:
> +      - description: RDMA Clock
> +
> +  iommus:
> +    description:
> +      This property should point to the respective IOMMU block with master port as argument,
> +      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.

Skip description, it's obvious. Instead maxItems.

> +
> +  mediatek,gce-client-reg:
> +    description:
> +      The register of display function block to be set by gce. There are 4 arguments,
> +      such as gce node, subsys id, offset and register size. The subsys id that is
> +      mapping to the register of display function blocks is defined in the gce header
> +      include/include/dt-bindings/gce/<chip>-gce.h of each chips.

Double "include" in the path.

> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: phandle of GCE
> +        - description: GCE subsys id
> +        - description: register offset
> +        - description: register size
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - power-domains
> +  - clocks
> +  - iommus
> +  - mediatek,gce-client-reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/mt8195-clk.h>
> +    #include <dt-bindings/power/mt8195-power.h>
> +    #include <dt-bindings/gce/mt8195-gce.h>
> +    #include <dt-bindings/memory/mt8195-memory-port.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        vdo1_rdma0: mdp-rdma@1c104000 {

Generic node name. dma-controller (if it does not conflict with
dma-common.yaml schema)?

> +            compatible = "mediatek,mt8195-vdo1-rdma";
> +            reg = <0 0x1c104000 0 0x1000>;
> +            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
> +            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
> +            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
> +            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
> +            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
> +        };
> +    };


Best regards,
Krzysztof