Re: [PATCH v6 0/3] Stingray thermal driver support

[Ray Jui <ray.jui@broadcom.com>]

Hi Zhang/Eduardo,

Can this patch series be merged? It looks like Srinath has addressed all
review comments?

The following tag should be added to the binding document patch:

Reviewed-by: Rob Herring <robh@kernel.org>

Thanks,

Ray

On 1/3/2019 12:55 AM, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
> 
> Changes from v5
>   - Addressed Eduardo Valentin comments.
> 
> Changes from v4
>   - Addressed Rob Herring comments on DT parameters and
>     thermal driver architecture.
>   - Removed brcm,max-crit-temp DT parameter
>   - Changed driver to thermal sensor registration model.
>   - Added trip DT properties.
> 
> Changes from v3
>   - Addressed Daniel lezcano comments.
>   - Elaborated commit description of thermal driver patch.
>   - Added brcm,max-crit-temp DT parameter.
> 
> Changes from v2:
>   - All stingray TMON DT nodes are combine together into single.
>     Temperature registers are combined into one mem resource.
>     brcm,tmon-mask parameter has available TMONs mask value.
>   - All available TMONs are initialized together in single
>     instance of driver probe call.
> 
> Changes from v1:
>   - Fixed auto build sparce warning.
> 
> Pramod Kumar (3):
>   dt-bindings: thermal: Add binding document for SR thermal
>   thermal: broadcom: Add Stingray thermal driver
>   arm64: dts: stingray: Add Stingray Thermal DT support.
> 
>  .../bindings/thermal/brcm,sr-thermal.txt           | 105 ++++++++++++++++++
>  .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  89 +++++++++++++++
>  drivers/thermal/Kconfig                            |   3 +-
>  drivers/thermal/broadcom/Kconfig                   |   9 ++
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/sr-thermal.c              | 122 +++++++++++++++++++++
>  6 files changed, 328 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
>  create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>