[PATCH v2 0/5] bluetooth: qca: enable WCN7850 support

[PATCH v2 0/5] bluetooth: qca: enable WCN7850 support

[Neil Armstrong]

This serie enables WCN7850 on the Qualcomm SM8550 QRD
reference platform.

The WCN7850 is close to the WCN6855 but uses different
firmware names.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v2:
- Convert if/else and qca_is_*() macros by switch/case to simplify adding now BT SoCs
- Add bindings reviewed-by
- Link to v1: https://lore.kernel.org/r/20230620-topic-sm8550-upstream-bt-v1-0-4728564f8872@linaro.org

---
Neil Armstrong (5):
      dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
      bluetooth: qca: use switch case for soc type behavior
      bluetooth: qca: add support for WCN7850
      arm64: dts: qcom: sm8550: add UART14 nodes
      arm64: dts: qcom: sm8550-qrd: add bluetooth support

 .../bindings/net/bluetooth/qualcomm-bluetooth.yaml |  23 ++
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts            |  43 ++++
 arch/arm64/boot/dts/qcom/sm8550.dtsi               |  30 +++
 drivers/bluetooth/btqca.c                          |  82 +++++--
 drivers/bluetooth/btqca.h                          |  30 +--
 drivers/bluetooth/hci_qca.c                        | 250 ++++++++++++++++-----
 6 files changed, 350 insertions(+), 108 deletions(-)
---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230620-topic-sm8550-upstream-bt-dfc4305f9c14

Best regards,
-- 
Neil Armstrong <neil.armstrong@linaro.org>

[PATCH v2 1/5] dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset

[Neil Armstrong]

Document the WCN7850 Bluetooth chipset.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index 68f78b90d23a..906a377d1616 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -24,6 +24,7 @@ properties:
       - qcom,qca6390-bt
       - qcom,wcn6750-bt
       - qcom,wcn6855-bt
+      - qcom,wcn7850-bt
 
   enable-gpios:
     maxItems: 1
@@ -53,6 +54,9 @@ properties:
   vddaon-supply:
     description: VDD_AON supply regulator handle
 
+  vdddig-supply:
+    description: VDD_DIG supply regulator handle
+
   vddbtcxmx-supply:
     description: VDD_BT_CXMX supply regulator handle
 
@@ -68,6 +72,9 @@ properties:
   vddrfa1p2-supply:
     description: VDD_RFA_1P2 supply regulator handle
 
+  vddrfa1p9-supply:
+    description: VDD_RFA_1P9 supply regulator handle
+
   vddrfa2p2-supply:
     description: VDD_RFA_2P2 supply regulator handle
 
@@ -150,6 +157,22 @@ allOf:
         - vddrfa0p8-supply
         - vddrfa1p2-supply
         - vddrfa1p7-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn7850-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddaon-supply
+        - vdddig-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p9-supply
 
 examples:
   - |

-- 
2.34.1

[PATCH v2 2/5] bluetooth: qca: use switch case for soc type behavior

[Neil Armstrong]

Use switch/case to handle soc type specific behaviour,
the permit dropping the qca_is_xxx() inline functions
and maked the code clearer and easier to update for new
SoCs.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/bluetooth/btqca.c   |  72 ++++++++++-----
 drivers/bluetooth/btqca.h   |  29 ------
 drivers/bluetooth/hci_qca.c | 219 +++++++++++++++++++++++++++++++++-----------
 3 files changed, 213 insertions(+), 107 deletions(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index e7e58a956d15..13820cebe5ba 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -601,23 +601,30 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
-	if (qca_is_wcn399x(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crbtfw%02x.tlv", rom_ver);
-	} else if (soc_type == QCA_QCA6390) {
+		break;
+	case QCA_QCA6390:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/htbtfw%02x.tlv", rom_ver);
-	} else if (soc_type == QCA_WCN6750) {
+		break;
+	case QCA_WCN6750:
 		/* Choose mbn file by default.If mbn file is not found
 		 * then choose tlv file
 		 */
 		config.type = ELF_TYPE_PATCH;
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/msbtfw%02x.mbn", rom_ver);
-	} else if (soc_type == QCA_WCN6855) {
+		break;
+	case QCA_WCN6855:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/hpbtfw%02x.tlv", rom_ver);
-	} else {
+		break;
+	default:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
 	}
@@ -633,30 +640,40 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
-	if (firmware_name)
+	if (firmware_name) {
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/%s", firmware_name);
-	else if (qca_is_wcn399x(soc_type)) {
-		if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
+	} else {
+		switch (soc_type) {
+		case QCA_WCN3990:
+		case QCA_WCN3991:
+		case QCA_WCN3998:
+			if (le32_to_cpu(ver.soc_id) == QCA_WCN3991_SOC_ID) {
+				snprintf(config.fwname, sizeof(config.fwname),
+					 "qca/crnv%02xu.bin", rom_ver);
+			} else {
+				snprintf(config.fwname, sizeof(config.fwname),
+					 "qca/crnv%02x.bin", rom_ver);
+			}
+			break;
+		case QCA_QCA6390:
 			snprintf(config.fwname, sizeof(config.fwname),
-				 "qca/crnv%02xu.bin", rom_ver);
-		} else {
+				 "qca/htnv%02x.bin", rom_ver);
+			break;
+		case QCA_WCN6750:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/msnv%02x.bin", rom_ver);
+			break;
+		case QCA_WCN6855:
 			snprintf(config.fwname, sizeof(config.fwname),
-				 "qca/crnv%02x.bin", rom_ver);
+				 "qca/hpnv%02x.bin", rom_ver);
+			break;
+
+		default:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/nvm_%08x.bin", soc_ver);
 		}
 	}
-	else if (soc_type == QCA_QCA6390)
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/htnv%02x.bin", rom_ver);
-	else if (soc_type == QCA_WCN6750)
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/msnv%02x.bin", rom_ver);
-	else if (soc_type == QCA_WCN6855)
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/hpnv%02x.bin", rom_ver);
-	else
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/nvm_%08x.bin", soc_ver);
 
 	err = qca_download_firmware(hdev, &config, soc_type, rom_ver);
 	if (err < 0) {
@@ -664,10 +681,17 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
-	if (soc_type >= QCA_WCN3991) {
+	switch (soc_type) {
+	case QCA_WCN3991:
+	case QCA_QCA6390:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		err = qca_disable_soc_logging(hdev);
 		if (err < 0)
 			return err;
+		break;
+	default:
+		break;
 	}
 
 	/* WCN399x and WCN6750 supports the Microsoft vendor extension with 0xFD70 as the
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index b884095bcd9d..e7d50a821bb7 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -160,20 +160,6 @@ int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
 			 enum qca_btsoc_type);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
-static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
-{
-	return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3991 ||
-	       soc_type == QCA_WCN3998;
-}
-static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
-{
-	return soc_type == QCA_WCN6750;
-}
-static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
-{
-	return soc_type == QCA_WCN6855;
-}
-
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -201,21 +187,6 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return -EOPNOTSUPP;
 }
 
-static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
-{
-	return false;
-}
-
-static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
-{
-	return false;
-}
-
-static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
-{
-	return false;
-}
-
 static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 {
 	return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 1b064504b388..25f1eeb605b6 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -605,9 +605,17 @@ static int qca_open(struct hci_uart *hu)
 	if (hu->serdev) {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 
-		if (qca_is_wcn399x(qcadev->btsoc_type) ||
-		    qca_is_wcn6750(qcadev->btsoc_type))
+		switch (qcadev->btsoc_type) {
+		case QCA_WCN3990:
+		case QCA_WCN3991:
+		case QCA_WCN3998:
+		case QCA_WCN6750:
 			hu->init_speed = qcadev->init_speed;
+			break;
+
+		default:
+			break;
+		}
 
 		if (qcadev->oper_speed)
 			hu->oper_speed = qcadev->oper_speed;
@@ -1316,12 +1324,18 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
 
 	/* Give the controller time to process the request */
-	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu)) ||
-	    qca_is_wcn6855(qca_soc_type(hu)))
+	switch (qca_soc_type(hu)) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		usleep_range(1000, 10000);
-	else
+		break;
+
+	default:
 		msleep(300);
+	}
 
 	return 0;
 }
@@ -1394,13 +1408,18 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 
 static int qca_check_speeds(struct hci_uart *hu)
 {
-	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu)) ||
-	    qca_is_wcn6855(qca_soc_type(hu))) {
+	switch (qca_soc_type(hu)) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
-	} else {
+		break;
+
+	default:
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) ||
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1429,14 +1448,27 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		/* Disable flow control for wcn3990 to deassert RTS while
 		 * changing the baudrate of chip and host.
 		 */
-		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type) ||
-		    qca_is_wcn6855(soc_type))
+		switch (soc_type) {
+		case QCA_WCN3990:
+		case QCA_WCN3991:
+		case QCA_WCN3998:
+		case QCA_WCN6750:
+		case QCA_WCN6855:
 			hci_uart_set_flow_control(hu, true);
+			break;
 
-		if (soc_type == QCA_WCN3990) {
+		default:
+			break;
+		}
+
+		switch (soc_type) {
+		case QCA_WCN3990:
 			reinit_completion(&qca->drop_ev_comp);
 			set_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+			break;
+
+		default:
+			break;
 		}
 
 		qca_baudrate = qca_get_baudrate_value(speed);
@@ -1448,12 +1480,21 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		host_set_baudrate(hu, speed);
 
 error:
-		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type) ||
-		    qca_is_wcn6855(soc_type))
+		switch (soc_type) {
+		case QCA_WCN3990:
+		case QCA_WCN3991:
+		case QCA_WCN3998:
+		case QCA_WCN6750:
+		case QCA_WCN6855:
 			hci_uart_set_flow_control(hu, false);
+			break;
 
-		if (soc_type == QCA_WCN3990) {
+		default:
+			break;
+		}
+
+		switch (soc_type) {
+		case QCA_WCN3990:
 			/* Wait for the controller to send the vendor event
 			 * for the baudrate change command.
 			 */
@@ -1465,6 +1506,10 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 			}
 
 			clear_bit(QCA_DROP_VENDOR_EVENT, &qca->flags);
+			break;
+
+		default:
+			break;
 		}
 	}
 
@@ -1626,12 +1671,19 @@ static int qca_regulator_init(struct hci_uart *hu)
 		}
 	}
 
-	if (qca_is_wcn399x(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
 		/* Forcefully enable wcn399x to enter in to boot mode. */
 		host_set_baudrate(hu, 2400);
 		ret = qca_send_power_pulse(hu, false);
 		if (ret)
 			return ret;
+		break;
+
+	default:
+		break;
 	}
 
 	/* For wcn6750 need to enable gpio bt_en */
@@ -1648,10 +1700,17 @@ static int qca_regulator_init(struct hci_uart *hu)
 
 	qca_set_speed(hu, QCA_INIT_SPEED);
 
-	if (qca_is_wcn399x(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
 		ret = qca_send_power_pulse(hu, true);
 		if (ret)
 			return ret;
+		break;
+
+	default:
+		break;
 	}
 
 	/* Now the device is in ready state to communicate with host.
@@ -1685,11 +1744,16 @@ static int qca_power_on(struct hci_dev *hdev)
 	if (!hu->serdev)
 		return 0;
 
-	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type) ||
-	    qca_is_wcn6855(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		ret = qca_regulator_init(hu);
-	} else {
+		break;
+
+	default:
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 		if (qcadev->bt_en) {
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
@@ -1712,6 +1776,7 @@ static int qca_setup(struct hci_uart *hu)
 	const char *firmware_name = qca_get_firmware_name(hu);
 	int ret;
 	struct qca_btsoc_version ver;
+	const char *soc_name;
 
 	ret = qca_check_speeds(hu);
 	if (ret)
@@ -1726,10 +1791,25 @@ static int qca_setup(struct hci_uart *hu)
 	 */
 	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 
-	bt_dev_info(hdev, "setting up %s",
-		qca_is_wcn399x(soc_type) ? "wcn399x" :
-		(soc_type == QCA_WCN6750) ? "wcn6750" :
-		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+		soc_name = "wcn399x";
+		break;
+
+	case QCA_WCN6750:
+		soc_name = "wcn6750";
+		break;
+
+	case QCA_WCN6855:
+		soc_name = "wcn6855";
+		break;
+
+	default:
+		soc_name = "ROME/QCA6390";
+	}
+	bt_dev_info(hdev, "setting up %s", soc_name);
 
 	qca->memdump_state = QCA_MEMDUMP_IDLE;
 
@@ -1740,16 +1820,21 @@ static int qca_setup(struct hci_uart *hu)
 
 	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
 
-	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type) ||
-	    qca_is_wcn6855(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hci_set_aosp_capable(hdev);
 
 		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
 			goto out;
-	} else {
+		break;
+
+	default:
 		qca_set_speed(hu, QCA_INIT_SPEED);
 	}
 
@@ -1763,9 +1848,15 @@ static int qca_setup(struct hci_uart *hu)
 		qca_baudrate = qca_get_baudrate_value(speed);
 	}
 
-	if (!(qca_is_wcn399x(soc_type) ||
-	      qca_is_wcn6750(soc_type) ||
-	      qca_is_wcn6855(soc_type))) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
+		break;
+
+	default:
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
@@ -1930,11 +2021,17 @@ static void qca_power_shutdown(struct hci_uart *hu)
 
 	qcadev = serdev_device_get_drvdata(hu->serdev);
 
-	if (qca_is_wcn399x(soc_type)) {
+	switch (soc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
 		host_set_baudrate(hu, 2400);
 		qca_send_power_pulse(hu, false);
 		qca_regulator_disable(qcadev);
-	} else if (soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855) {
+		break;
+
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 		msleep(100);
 		qca_regulator_disable(qcadev);
@@ -1942,7 +2039,9 @@ static void qca_power_shutdown(struct hci_uart *hu)
 			sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
 			bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
 		}
-	} else if (qcadev->bt_en) {
+		break;
+
+	default:
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 	}
 
@@ -2067,11 +2166,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	if (!qcadev->oper_speed)
 		BT_DBG("UART will pick default operating speed");
 
-	if (data &&
-	    (qca_is_wcn399x(data->soc_type) ||
-	     qca_is_wcn6750(data->soc_type) ||
-	     qca_is_wcn6855(data->soc_type))) {
+	if (data)
 		qcadev->btsoc_type = data->soc_type;
+	else
+		qcadev->btsoc_type = QCA_ROME;
+
+	switch (qcadev->btsoc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -2115,12 +2220,9 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 			BT_ERR("wcn3990 serdev registration failed");
 			return err;
 		}
-	} else {
-		if (data)
-			qcadev->btsoc_type = data->soc_type;
-		else
-			qcadev->btsoc_type = QCA_ROME;
+		break;
 
+	default:
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
 		if (IS_ERR_OR_NULL(qcadev->bt_en)) {
@@ -2176,13 +2278,22 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
 	struct qca_power *power = qcadev->bt_power;
 
-	if ((qca_is_wcn399x(qcadev->btsoc_type) ||
-	     qca_is_wcn6750(qcadev->btsoc_type) ||
-	     qca_is_wcn6855(qcadev->btsoc_type)) &&
-	    power->vregs_on)
-		qca_power_shutdown(&qcadev->serdev_hu);
-	else if (qcadev->susclk)
-		clk_disable_unprepare(qcadev->susclk);
+	switch (qcadev->btsoc_type) {
+	case QCA_WCN3990:
+	case QCA_WCN3991:
+	case QCA_WCN3998:
+	case QCA_WCN6750:
+	case QCA_WCN6855:
+		if (power->vregs_on) {
+			qca_power_shutdown(&qcadev->serdev_hu);
+			break;
+		}
+		fallthrough;
+
+	default:
+		if (qcadev->susclk)
+			clk_disable_unprepare(qcadev->susclk);
+	}
 
 	hci_uart_unregister_device(&qcadev->serdev_hu);
 }

-- 
2.34.1

[PATCH v2 3/5] bluetooth: qca: add support for WCN7850

[Neil Armstrong]

Add support for the WCN7850 Bluetooth chipset.

Tested on the SM8550 QRD platform.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/bluetooth/btqca.c   | 10 ++++++++++
 drivers/bluetooth/btqca.h   |  1 +
 drivers/bluetooth/hci_qca.c | 31 ++++++++++++++++++++++++++++++-
 3 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 13820cebe5ba..982ce94d7350 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -624,6 +624,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/hpbtfw%02x.tlv", rom_ver);
 		break;
+	case QCA_WCN7850:
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hmtbtfw%02x.tlv", rom_ver);
+		break;
 	default:
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -668,6 +672,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 			snprintf(config.fwname, sizeof(config.fwname),
 				 "qca/hpnv%02x.bin", rom_ver);
 			break;
+		case QCA_WCN7850:
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/hmtnv%02x.bin", rom_ver);
+			break;
 
 		default:
 			snprintf(config.fwname, sizeof(config.fwname),
@@ -686,6 +694,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	case QCA_QCA6390:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		err = qca_disable_soc_logging(hdev);
 		if (err < 0)
 			return err;
@@ -719,6 +728,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	case QCA_WCN3991:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		/* get fw build info */
 		err = qca_read_fw_build_info(hdev);
 		if (err < 0)
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index e7d50a821bb7..34f507bcbfca 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -148,6 +148,7 @@ enum qca_btsoc_type {
 	QCA_QCA6390,
 	QCA_WCN6750,
 	QCA_WCN6855,
+	QCA_WCN7850,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 25f1eeb605b6..792ddf692bc4 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1330,6 +1330,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		usleep_range(1000, 10000);
 		break;
 
@@ -1414,6 +1415,7 @@ static int qca_check_speeds(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1454,6 +1456,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		case QCA_WCN3998:
 		case QCA_WCN6750:
 		case QCA_WCN6855:
+		case QCA_WCN7850:
 			hci_uart_set_flow_control(hu, true);
 			break;
 
@@ -1486,6 +1489,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		case QCA_WCN3998:
 		case QCA_WCN6750:
 		case QCA_WCN6855:
+		case QCA_WCN7850:
 			hci_uart_set_flow_control(hu, false);
 			break;
 
@@ -1750,6 +1754,7 @@ static int qca_power_on(struct hci_dev *hdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		ret = qca_regulator_init(hu);
 		break;
 
@@ -1806,6 +1811,10 @@ static int qca_setup(struct hci_uart *hu)
 		soc_name = "wcn6855";
 		break;
 
+	case QCA_WCN7850:
+		soc_name = "wcn7850";
+		break;
+
 	default:
 		soc_name = "ROME/QCA6390";
 	}
@@ -1826,6 +1835,7 @@ static int qca_setup(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hci_set_aosp_capable(hdev);
 
@@ -1854,6 +1864,7 @@ static int qca_setup(struct hci_uart *hu)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		break;
 
 	default:
@@ -1996,6 +2007,20 @@ static const struct qca_device_data qca_soc_data_wcn6855 __maybe_unused = {
 	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
 };
 
+static const struct qca_device_data qca_soc_data_wcn7850 __maybe_unused = {
+	.soc_type = QCA_WCN7850,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 5000 },
+		{ "vddaon", 26000 },
+		{ "vdddig", 126000 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p2", 257000 },
+		{ "vddrfa1p9", 302000 },
+	},
+	.num_vregs = 6,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -2177,6 +2202,7 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -2206,7 +2232,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 					       GPIOD_IN);
 		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) &&
 		    (data->soc_type == QCA_WCN6750 ||
-		     data->soc_type == QCA_WCN6855))
+		     data->soc_type == QCA_WCN6855 ||
+		     data->soc_type == QCA_WCN7850))
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2284,6 +2311,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 	case QCA_WCN3998:
 	case QCA_WCN6750:
 	case QCA_WCN6855:
+	case QCA_WCN7850:
 		if (power->vregs_on) {
 			qca_power_shutdown(&qcadev->serdev_hu);
 			break;
@@ -2475,6 +2503,7 @@ static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
 	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
+	{ .compatible = "qcom,wcn7850-bt", .data = &qca_soc_data_wcn7850},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);

-- 
2.34.1

[PATCH v2 4/5] arm64: dts: qcom: sm8550: add UART14 nodes

[Neil Armstrong]

Add the Geni High Speed UART QUP instance 2 element 6
node and associated default pinctrl.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 75cd374943eb..252e3863322c 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1053,6 +1053,20 @@ spi13: spi@894000 {
 				status = "disabled";
 			};
 
+			uart14: uart@898000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x898000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-core", "qup-config";
+				status = "disabled";
+			};
+
 			i2c15: i2c@89c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0089c000 0 0x4000>;
@@ -3382,6 +3396,22 @@ qup_uart7_default: qup-uart7-default-state {
 				bias-disable;
 			};
 
+			qup_uart14_default: qup-uart14-default-state {
+				/* TX, RX */
+				pins = "gpio78", "gpio79";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_uart14_cts_rts: qup-uart14-cts-rts-state {
+				/* CTS, RTS */
+				pins = "gpio76", "gpio77";
+				function = "qup2_se6";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			sdc2_sleep: sdc2-sleep-state {
 				clk-pins {
 					pins = "sdc2_clk";

-- 
2.34.1

Re: [PATCH v2 4/5] arm64: dts: qcom: sm8550: add UART14 nodes

[Krzysztof Kozlowski]

On 27/06/2023 10:15, Neil Armstrong wrote:
> Add the Geni High Speed UART QUP instance 2 element 6
> node and associated default pinctrl.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 30 ++++++++++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index 75cd374943eb..252e3863322c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1053,6 +1053,20 @@ spi13: spi@894000 {
>  				status = "disabled";
>  			};
>  
> +			uart14: uart@898000 {

The node name should be "serial" (dtbs_check will complain)


Best regards,
Krzysztof

[PATCH v2 5/5] arm64: dts: qcom: sm8550-qrd: add bluetooth support

[Neil Armstrong]

Enable the WCN7850 bluetooth over the UART14 link.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 43 +++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 8669d29144bb..8f4b07475ca9 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -22,6 +22,7 @@ / {
 
 	aliases {
 		serial0 = &uart7;
+		serial1 = &uart14;
 	};
 
 	wcd938x: audio-codec {
@@ -529,6 +530,10 @@ &qupv3_id_0 {
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/sm8550/adsp.mbn",
 			"qcom/sm8550/adsp_dtb.mbn";
@@ -576,6 +581,21 @@ wcd_tx: codec@0,3 {
 &tlmm {
 	gpio-reserved-ranges = <32 8>;
 
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
 	sde_dsi_active: sde-dsi-active-state {
 		pins = "gpio133";
 		function = "gpio";
@@ -617,6 +637,29 @@ &uart7 {
 	status = "okay";
 };
 
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s4e_0p95>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa0p8-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p9-supply = <&vreg_s6g_1p86>;
+
+		max-speed = <3200000>;
+
+		enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&bt_default>;
+		pinctrl-names = "default";
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l17b_2p5>;

-- 
2.34.1

Re: [PATCH v2 0/5] bluetooth: qca: enable WCN7850 support

[Neil Armstrong]

Hi,

On 27/06/2023 10:15, Neil Armstrong wrote:
> This serie enables WCN7850 on the Qualcomm SM8550 QRD
> reference platform.
> 
> The WCN7850 is close to the WCN6855 but uses different
> firmware names.

Gentle ping,

Thanks,
Neil

> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> Changes in v2:
> - Convert if/else and qca_is_*() macros by switch/case to simplify adding now BT SoCs
> - Add bindings reviewed-by
> - Link to v1: https://lore.kernel.org/r/20230620-topic-sm8550-upstream-bt-v1-0-4728564f8872@linaro.org
> 
> ---
> Neil Armstrong (5):
>        dt-bindings: net: bluetooth: qualcomm: document WCN7850 chipset
>        bluetooth: qca: use switch case for soc type behavior
>        bluetooth: qca: add support for WCN7850
>        arm64: dts: qcom: sm8550: add UART14 nodes
>        arm64: dts: qcom: sm8550-qrd: add bluetooth support
> 
>   .../bindings/net/bluetooth/qualcomm-bluetooth.yaml |  23 ++
>   arch/arm64/boot/dts/qcom/sm8550-qrd.dts            |  43 ++++
>   arch/arm64/boot/dts/qcom/sm8550.dtsi               |  30 +++
>   drivers/bluetooth/btqca.c                          |  82 +++++--
>   drivers/bluetooth/btqca.h                          |  30 +--
>   drivers/bluetooth/hci_qca.c                        | 250 ++++++++++++++++-----
>   6 files changed, 350 insertions(+), 108 deletions(-)
> ---
> base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
> change-id: 20230620-topic-sm8550-upstream-bt-dfc4305f9c14
> 
> Best regards,