From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Subject: Re: [PATCH] ARM: dts: at91: use generic node name for dataflash
Date: Wed, 13 Apr 2022 11:24:21 +0200 [thread overview]
Message-ID: <a68ee2e3-0af7-1076-df0f-64acf731fd97@microchip.com> (raw)
In-Reply-To: <20220412105013.249793-1-krzysztof.kozlowski@linaro.org>
On 12/04/2022 at 12:50, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> The node names should be generic, so use "flash" for dataflash nodes and
> for cfi-flash.
>
> Suggested-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
and queued in "fixes" branch for 5.18 as it can save us some error while
checking DT.
Best regards,
Nicolas
> ---
> Documentation/devicetree/bindings/mfd/atmel-flexcom.txt | 2 +-
> arch/arm/boot/dts/at91rm9200ek.dts | 4 ++--
> arch/arm/boot/dts/at91sam9260ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9261ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9263ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 2 +-
> arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 +-
> arch/arm/boot/dts/at91sam9rlek.dts | 2 +-
> arch/arm/boot/dts/usb_a9263.dts | 2 +-
> 9 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> index 692300117c64..9d837535637b 100644
> --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> @@ -54,7 +54,7 @@ flexcom@f8034000 {
> clock-names = "spi_clk";
> atmel,fifo-size = <32>;
>
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at25f512b";
> reg = <0>;
> spi-max-frequency = <20000000>;
> diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
> index e1ef4e44e663..4624a6f076f8 100644
> --- a/arch/arm/boot/dts/at91rm9200ek.dts
> +++ b/arch/arm/boot/dts/at91rm9200ek.dts
> @@ -73,7 +73,7 @@ &pinctrl_uart1_dcd
> spi0: spi@fffe0000 {
> status = "okay";
> cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <15000000>;
> reg = <0>;
> @@ -94,7 +94,7 @@ usb0: ohci@300000 {
> status = "okay";
> };
>
> - nor_flash@10000000 {
> + flash@10000000 {
> compatible = "cfi-flash";
> reg = <0x10000000 0x800000>;
> linux,mtd-name = "physmap-flash.0";
> diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
> index ce96345d28a3..6381088ba24f 100644
> --- a/arch/arm/boot/dts/at91sam9260ek.dts
> +++ b/arch/arm/boot/dts/at91sam9260ek.dts
> @@ -92,7 +92,7 @@ macb0: ethernet@fffc4000 {
>
> spi0: spi@fffc8000 {
> cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
> - mtd_dataflash@1 {
> + flash@1 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <50000000>;
> reg = <1>;
> diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
> index beed819609e8..8f11c0b7d76d 100644
> --- a/arch/arm/boot/dts/at91sam9261ek.dts
> +++ b/arch/arm/boot/dts/at91sam9261ek.dts
> @@ -145,7 +145,7 @@ spi0: spi@fffc8000 {
> cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
> status = "okay";
>
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> reg = <0>;
> spi-max-frequency = <15000000>;
> diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
> index 71f60576761a..42e734020235 100644
> --- a/arch/arm/boot/dts/at91sam9263ek.dts
> +++ b/arch/arm/boot/dts/at91sam9263ek.dts
> @@ -95,7 +95,7 @@ pinctrl_board_mmc0: mmc0-board {
> spi0: spi@fffa4000 {
> status = "okay";
> cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <50000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> index 87bb39060e8b..74b90dc58cbf 100644
> --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
> @@ -110,7 +110,7 @@ ssc0: ssc@fffbc000 {
>
> spi0: spi@fffc8000 {
> cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
> - mtd_dataflash@1 {
> + flash@1 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <50000000>;
> reg = <1>;
> diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> index b6256a20fbc7..e5db198a87a8 100644
> --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
> +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
> @@ -167,7 +167,7 @@ pinctrl_pwm_leds: pwm-led {
> spi0: spi@fffa4000{
> status = "okay";
> cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <13000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
> index 62981b39c815..d74b8d9d84aa 100644
> --- a/arch/arm/boot/dts/at91sam9rlek.dts
> +++ b/arch/arm/boot/dts/at91sam9rlek.dts
> @@ -180,7 +180,7 @@ usb0: gadget@fffd4000 {
> spi0: spi@fffcc000 {
> status = "okay";
> cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> spi-max-frequency = <15000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts
> index 8a0cfbfd0c45..b6cb9cdf8197 100644
> --- a/arch/arm/boot/dts/usb_a9263.dts
> +++ b/arch/arm/boot/dts/usb_a9263.dts
> @@ -60,7 +60,7 @@ usb1: gadget@fff78000 {
> spi0: spi@fffa4000 {
> cs-gpios = <&pioB 15 GPIO_ACTIVE_HIGH>;
> status = "okay";
> - mtd_dataflash@0 {
> + flash@0 {
> compatible = "atmel,at45", "atmel,dataflash";
> reg = <0>;
> spi-max-frequency = <15000000>;
> --
> 2.32.0
>
--
Nicolas Ferre
prev parent reply other threads:[~2022-04-13 9:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-12 10:50 [PATCH] ARM: dts: at91: use generic node name for dataflash Krzysztof Kozlowski
2022-04-12 11:21 ` Tudor.Ambarus
2022-04-13 9:24 ` Nicolas Ferre [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a68ee2e3-0af7-1076-df0f-64acf731fd97@microchip.com \
--to=nicolas.ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tudor.ambarus@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).