From: Brandon Wyman <bjwyman@gmail.com>
To: Eddie James <eajames@linux.ibm.com>, joel@jms.id.au
Cc: devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
Matthew Barth <msbarth@us.ibm.com>,
robh+dt@kernel.org
Subject: Re: [PATCH 15/22] ARM: dts: Aspeed: Everest: Add pca9552 fan presence
Date: Wed, 7 Apr 2021 17:34:05 -0500 [thread overview]
Message-ID: <a6ca4ac6-6f6d-b6d5-f3c9-ed304aac3eb0@gmail.com> (raw)
In-Reply-To: <20210329150020.13632-16-eajames@linux.ibm.com>
On 2021-03-29 10:00, Eddie James wrote:
> From: Matthew Barth <msbarth@us.ibm.com>
>
> Add the pca9552 at address 0x61 on i2c14 behind mux0 channel 3 with the
> 4 GPIO fan presence inputs.
>
> Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
> Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Brandon Wyman <bjwyman@gmail.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 128 +++++++++++++++++++
> 1 file changed, 128 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
> index de2606b416e6..d7f23b74dd4b 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
> @@ -171,6 +171,37 @@ vga_memory: region@bf000000 {
> reg = <0xbf000000 0x01000000>; /* 16M */
> };
> };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
> + linux,code = <15>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
> + linux,code = <14>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
> + linux,code = <13>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
> + linux,code = <12>;
> + };
> + };
> };
>
> &i2c0 {
> @@ -567,6 +598,103 @@ fan@3 {
> maxim,fan-fault-pin-mon;
> };
> };
> +
> + pca0: pca9552@61 {
> + compatible = "nxp,pca9552";
> + reg = <0x61>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names =
> + "","","","",
> + "","","","",
> + "","","","",
> + "presence-fan3",
> + "presence-fan2",
> + "presence-fan1",
> + "presence-fan0";
> +
> + gpio@0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio@15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> };
> };
>
next prev parent reply other threads:[~2021-04-07 22:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 14:59 [PATCH 00/22] ARM: dts: aspeed: Updates for Rainier and Everest machines Eddie James
2021-03-29 14:59 ` [PATCH 01/22] ARM: dts: aspeed: rainier: Add Operator Panel LEDs Eddie James
2021-03-29 15:00 ` [PATCH 02/22] ARM: dts: aspeed: rainier: Add directly controlled LEDs Eddie James
2021-03-29 15:00 ` [PATCH 03/22] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans Eddie James
2021-03-29 15:00 ` [PATCH 04/22] ARM: dts: aspeed: rainier: Add additional processor CFAMs Eddie James
2021-03-29 15:00 ` [PATCH 05/22] ARM: dts: aspeed: rainier: Add leds that are off PCA9552 Eddie James
2021-03-29 15:00 ` [PATCH 06/22] ARM: dts: aspeed: rainier: Add leds that are off pic16f882 Eddie James
2021-03-29 15:00 ` [PATCH 07/22] ARM: dts: aspeed: rainier: Add leds on optional DASD cards Eddie James
2021-03-29 15:00 ` [PATCH 08/22] ARM: dts: aspeed: rainier: Add leds on optional PCI cable cards Eddie James
2021-03-29 15:00 ` [PATCH 09/22] ARM: dts: aspeed: rainier: Add presence GPIOs Eddie James
2021-03-29 15:00 ` [PATCH 10/22] ARM: dts: aspeed: rainier: Enable fan watchdog Eddie James
2021-03-29 15:00 ` [PATCH 11/22] ARM: dts: aspeed: rainier 4U: Fix fan configuration Eddie James
2021-03-30 0:23 ` kernel test robot
2021-03-29 15:00 ` [PATCH 12/22] ARM: dts: aspeed: Everest: Add I2C components Eddie James
2021-03-29 15:00 ` [PATCH 13/22] ARM: dts: Aspeed: Everest: Add max31785 fan controller device Eddie James
2021-03-29 15:00 ` [PATCH 14/22] ARM: dts: Aspeed: Everest: Add FSI CFAMs and re-number engines Eddie James
2021-03-29 15:00 ` [PATCH 15/22] ARM: dts: Aspeed: Everest: Add pca9552 fan presence Eddie James
2021-04-07 22:34 ` Brandon Wyman [this message]
2021-03-29 15:00 ` [PATCH 16/22] ARM: dts: aspeed: everest: Add power supply i2c devices Eddie James
2021-03-29 15:00 ` [PATCH 17/22] ARM: dts: aspeed: everest: Add UCD90320 power sequencer Eddie James
2021-03-29 15:00 ` [PATCH 18/22] ARM: dts: aspeed: everest: GPIOs support Eddie James
2021-04-07 22:19 ` Brandon Wyman
2021-03-29 15:00 ` [PATCH 19/22] ARM: dts: Aspeed: Everest: Add RTC Eddie James
2021-03-29 15:00 ` [PATCH 20/22] ARM: dts: aspeed: everest: Enable fan watchdog Eddie James
2021-04-08 0:34 ` Andrew Jeffery
2021-03-29 15:00 ` [PATCH 21/22] ARM: dts: aspeed: rainier: Support pass 2 planar Eddie James
2021-03-30 3:57 ` kernel test robot
2021-03-29 15:00 ` [PATCH 22/22] ARM: dts: aspeed: Add Rainier 1S4U machine Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a6ca4ac6-6f6d-b6d5-f3c9-ed304aac3eb0@gmail.com \
--to=bjwyman@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=eajames@linux.ibm.com \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=msbarth@us.ibm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).