From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>,
linux-arm-kernel@lists.infradead.org
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, nbd@nbd.name, john@phrozen.org,
devicetree@vger.kernel.org, dd@embedd.com,
catalin.marinas@arm.com, will@kernel.org, upstream@airoha.com,
lorenzo.bianconi83@gmail.com
Subject: Re: [PATCH v3 2/4] arm64: dts: Add Airoha EN7581 SoC and EN7581 Evaluation Board
Date: Thu, 7 Mar 2024 12:28:25 +0100 [thread overview]
Message-ID: <a7fda0ba-3535-4e62-a669-86fb6fbe1888@collabora.com> (raw)
In-Reply-To: <ca51cb007d06e8fc0dce613749dbe44b5116ac98.1709768157.git.lorenzo@kernel.org>
Il 07/03/24 01:11, Lorenzo Bianconi ha scritto:
> From: Daniel Danzberger <dd@embedd.com>
>
> Introduce the Airoha EN7581 SoC's dtsi and the Airoha EN7581 Evaluation
> Board's dts file, as well as the required Makefiles.
>
> Signed-off-by: Daniel Danzberger <dd@embedd.com>
> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> arch/arm64/boot/dts/Makefile | 1 +
> arch/arm64/boot/dts/airoha/Makefile | 2 +
> arch/arm64/boot/dts/airoha/en7581-evb.dts | 26 ++++
> arch/arm64/boot/dts/airoha/en7581.dtsi | 154 ++++++++++++++++++++++
> 4 files changed, 183 insertions(+)
> create mode 100644 arch/arm64/boot/dts/airoha/Makefile
> create mode 100644 arch/arm64/boot/dts/airoha/en7581-evb.dts
> create mode 100644 arch/arm64/boot/dts/airoha/en7581.dtsi
>
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 30dd6347a929..21cd3a87f385 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> subdir-y += actions
> +subdir-y += airoha
> subdir-y += allwinner
> subdir-y += altera
> subdir-y += amazon
> diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
> new file mode 100644
> index 000000000000..ebea112ce1d7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/airoha/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
> diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> new file mode 100644
> index 000000000000..cf58e43dd5b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/dts-v1/;
> +
> +/* Bootloader installs ATF here */
> +/memreserve/ 0x80000000 0x200000;
> +
> +#include "en7581.dtsi"
> +
> +/ {
> + model = "Airoha EN7581 Evaluation Board";
> + compatible = "airoha,en7581-evb", "airoha,en7581";
> +
> + aliases {
> + serial0 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x2 0x00000000>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
> new file mode 100644
> index 000000000000..732080cf6f2b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
> @@ -0,0 +1,154 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + npu-binary@84000000 {
> + no-map;
> + reg = <0x0 0x84000000 0x0 0xA00000>;
> + };
> +
> + npu-flag@84B0000 {
> + no-map;
> + reg = <0x0 0x84B00000 0x0 0x100000>;
> + };
> +
> + npu-pkt@85000000 {
> + no-map;
> + reg = <0x0 0x85000000 0x0 0x1A00000>;
> + };
> +
> + npu-phyaddr@86B00000 {
> + no-map;
> + reg = <0x0 0x86B00000 0x0 0x100000>;
> + };
> +
> + npu-rxdesc@86D00000 {
> + no-map;
> + reg = <0x0 0x86D00000 0x0 0x100000>;
Lower case hex please. Here and everywhere else.
Otherwise,
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cheers,
Angelo
next prev parent reply other threads:[~2024-03-07 11:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-07 0:11 [PATCH v3 0/4] arm64: Add support for Airoha EN7581 Soc Lorenzo Bianconi
2024-03-07 0:11 ` [PATCH v3 1/4] dt-bindings: arm64: dts: airoha: Add en7581 entry Lorenzo Bianconi
2024-03-07 11:28 ` AngeloGioacchino Del Regno
2024-03-07 0:11 ` [PATCH v3 2/4] arm64: dts: Add Airoha EN7581 SoC and EN7581 Evaluation Board Lorenzo Bianconi
2024-03-07 11:28 ` AngeloGioacchino Del Regno [this message]
2024-03-07 0:11 ` [PATCH v3 3/4] arm64: add Airoha EN7581 platform Lorenzo Bianconi
2024-03-07 11:37 ` AngeloGioacchino Del Regno
2024-03-07 12:14 ` Lorenzo Bianconi
2024-03-07 12:22 ` AngeloGioacchino Del Regno
2024-03-07 0:11 ` [PATCH v3 4/4] arm64: defconfig: enable Airoha platform Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a7fda0ba-3535-4e62-a669-86fb6fbe1888@collabora.com \
--to=angelogioacchino.delregno@collabora.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=dd@embedd.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lorenzo.bianconi83@gmail.com \
--cc=lorenzo@kernel.org \
--cc=nbd@nbd.name \
--cc=robh+dt@kernel.org \
--cc=upstream@airoha.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).