* [PATCH 2/2] dt-bindings: clock: drop useless consumer example
2022-03-16 13:08 [PATCH 1/2] dt-bindings: gpio: pca95xx: drop useless consumer example Krzysztof Kozlowski
@ 2022-03-16 13:08 ` Krzysztof Kozlowski
2022-03-21 18:23 ` Rob Herring
2022-03-21 18:22 ` [PATCH 1/2] dt-bindings: gpio: pca95xx: " Rob Herring
1 sibling, 1 reply; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-03-16 13:08 UTC (permalink / raw)
To: Manivannan Sadhasivam, Michael Turquette, Stephen Boyd,
Rob Herring, Krzysztof Kozlowski, Luca Ceresoli, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, Thierry Reding, Jonathan Hunter, Linus Walleij,
Bartosz Golaszewski, Alexander Shiyan, Steffen Trumtrar,
A.s. Dong, Giulio Benetti, Jesse Taube, linux-arm-kernel,
linux-clk, devicetree, linux-kernel, linux-tegra, linux-gpio
Cc: Ioana Ciornei, Krzysztof Kozlowski
Consumer examples in the bindings of resource providers are trivial,
useless and duplication of code. Remove the example code for consumer
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/clock/bitmain,bm1880-clk.yaml | 12 ------------
.../devicetree/bindings/clock/idt,versaclock5.yaml | 7 -------
.../devicetree/bindings/clock/imx1-clock.yaml | 9 ---------
.../devicetree/bindings/clock/imx21-clock.yaml | 9 ---------
.../devicetree/bindings/clock/imx23-clock.yaml | 9 ---------
.../devicetree/bindings/clock/imx25-clock.yaml | 8 --------
.../devicetree/bindings/clock/imx27-clock.yaml | 9 ---------
.../devicetree/bindings/clock/imx28-clock.yaml | 9 ---------
.../devicetree/bindings/clock/imx31-clock.yaml | 8 --------
.../devicetree/bindings/clock/imx35-clock.yaml | 8 --------
.../devicetree/bindings/clock/imx7ulp-pcc-clock.yaml | 11 -----------
.../devicetree/bindings/clock/imx7ulp-scg-clock.yaml | 11 -----------
.../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 11 -----------
.../devicetree/bindings/clock/imxrt1050-clock.yaml | 8 --------
.../bindings/clock/nvidia,tegra124-car.yaml | 7 -------
.../bindings/clock/nvidia,tegra20-car.yaml | 7 -------
16 files changed, 143 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 228c9313df53..f0f9392470a6 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
#clock-cells = <1>;
};
- # Example UART controller node that consumes clock generated by the clock controller:
- - |
- uart0: serial@58018000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x58018000 0x2000>;
- clocks = <&clk 45>, <&clk 46>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <0 9 4>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
-
...
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index ffd6ae0eed64..be66f1e8b547 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -191,11 +191,4 @@ examples:
};
};
- /* Consumer referencing the 5P49V5923 pin OUT1 */
- consumer {
- /* ... */
- clocks = <&vc5 1>;
- /* ... */
- };
-
...
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
index f4833a29b79e..56f524780b1a 100644
--- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -40,12 +40,3 @@ examples:
compatible = "fsl,imx1-ccm";
reg = <0x0021b000 0x1000>;
};
-
- pwm@208000 {
- #pwm-cells = <2>;
- compatible = "fsl,imx1-pwm";
- reg = <0x00208000 0x1000>;
- interrupts = <34>;
- clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
index 518ad9a4733c..e2d50544700a 100644
--- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -40,12 +40,3 @@ examples:
reg = <0x10027000 0x800>;
#clock-cells = <1>;
};
-
- serial@1000a000 {
- compatible = "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
- <&clks IMX21_CLK_PER1>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 5e296a00e14f..7e890ab9c77d 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -83,12 +83,3 @@ examples:
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
-
- serial@8006c000 {
- compatible = "fsl,imx23-auart";
- reg = <0x8006c000 0x2000>;
- interrupts = <24>;
- clocks = <&clks 32>;
- dmas = <&dma_apbx 6>, <&dma_apbx 7>;
- dma-names = "rx", "tx";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
index 2a2b10778e72..1792e138984b 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -176,11 +176,3 @@ examples:
interrupts = <31>;
#clock-cells = <1>;
};
-
- serial@43f90000 {
- compatible = "fsl,imx25-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 79>, <&clks 50>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index 160268f24487..99925aa22a4c 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -44,12 +44,3 @@ examples:
interrupts = <31>;
#clock-cells = <1>;
};
-
- serial@1000a000 {
- compatible = "fsl,imx27-uart", "fsl,imx21-uart";
- reg = <0x1000a000 0x1000>;
- interrupts = <20>;
- clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
- <&clks IMX27_CLK_PER1_GATE>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index f831b780f951..a542d680b1ca 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -106,12 +106,3 @@ examples:
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
-
- serial@8006a000 {
- compatible = "fsl,imx28-auart";
- reg = <0x8006a000 0x2000>;
- interrupts = <112>;
- dmas = <&dma_apbx 8>, <&dma_apbx 9>;
- dma-names = "rx", "tx";
- clocks = <&clks 45>;
- };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index d2336261c922..168c8ada5e81 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -110,11 +110,3 @@ examples:
interrupts = <31>, <53>;
#clock-cells = <1>;
};
-
- serial@43f90000 {
- compatible = "fsl,imx31-uart", "fsl,imx21-uart";
- reg = <0x43f90000 0x4000>;
- interrupts = <45>;
- clocks = <&clks 10>, <&clks 30>;
- clock-names = "ipg", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
index 3e20ccaf8131..6415bb6a8d04 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -129,11 +129,3 @@ examples:
interrupts = <31>;
#clock-cells = <1>;
};
-
- mmc@53fb4000 {
- compatible = "fsl,imx35-esdhc";
- reg = <0x53fb4000 0x4000>;
- interrupts = <7>;
- clocks = <&clks 9>, <&clks 8>, <&clks 43>;
- clock-names = "ipg", "ahb", "per";
- };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
index 7caf5cee9199..739c3378f8c8 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -108,14 +108,3 @@ examples:
"upll", "sosc_bus_clk", "firc_bus_clk",
"rosc", "spll_bus_clk";
};
-
- mmc@40380000 {
- compatible = "fsl,imx7ulp-usdhc";
- reg = <0x40380000 0x10000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
- <&scg1 IMX7ULP_CLK_NIC1_DIV>,
- <&pcc2 IMX7ULP_CLK_USDHC1>;
- clock-names ="ipg", "ahb", "per";
- bus-width = <4>;
- };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
index ee8efb4ed599..d06344d7e34f 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -86,14 +86,3 @@ examples:
"firc", "upll";
#clock-cells = <1>;
};
-
- mmc@40380000 {
- compatible = "fsl,imx7ulp-usdhc";
- reg = <0x40380000 0x10000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
- <&scg1 IMX7ULP_CLK_NIC1_DIV>,
- <&pcc2 IMX7ULP_CLK_USDHC1>;
- clock-names ="ipg", "ahb", "per";
- bus-width = <4>;
- };
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 0f6fe365ebf3..cb80105b3c70 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -101,14 +101,3 @@ examples:
"sdhc0_lpcg_ahb_clk";
power-domains = <&pd IMX_SC_R_SDHC_0>;
};
-
- mmc@5b010000 {
- compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x5b010000 0x10000>;
- clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
- <&sdhc0_lpcg IMX_LPCG_CLK_5>,
- <&sdhc0_lpcg IMX_LPCG_CLK_0>;
- clock-names = "ipg", "ahb", "per";
- power-domains = <&pd IMX_SC_R_SDHC_0>;
- };
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
index 35fd08c143f4..03fc5c1a2939 100644
--- a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -57,11 +57,3 @@ examples:
clock-names = "osc";
#clock-cells = <1>;
};
-
- lpuart1: serial@40184000 {
- compatible = "fsl,imxrt1050-lpuart";
- reg = <0x40184000 0x4000>;
- interrupts = <20>;
- clocks = <&clks IMXRT1050_CLK_LPUART1>;
- clock-names = "ipg";
- };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index ec7ab1483652..1b2181f6d440 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -106,10 +106,3 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
};
-
- usb-controller@c5004000 {
- compatible = "nvidia,tegra20-ehci";
- reg = <0xc5004000 0x4000>;
- clocks = <&car TEGRA124_CLK_USB2>;
- resets = <&car TEGRA124_CLK_USB2>;
- };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index f832abb7f11a..bee2dd4b29bf 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -97,10 +97,3 @@ examples:
power-domains = <&domain>;
};
};
-
- usb-controller@c5004000 {
- compatible = "nvidia,tegra20-ehci";
- reg = <0xc5004000 0x4000>;
- clocks = <&car TEGRA20_CLK_USB2>;
- resets = <&car TEGRA20_CLK_USB2>;
- };
--
2.32.0
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH 1/2] dt-bindings: gpio: pca95xx: drop useless consumer example
2022-03-16 13:08 [PATCH 1/2] dt-bindings: gpio: pca95xx: drop useless consumer example Krzysztof Kozlowski
2022-03-16 13:08 ` [PATCH 2/2] dt-bindings: clock: " Krzysztof Kozlowski
@ 2022-03-21 18:22 ` Rob Herring
1 sibling, 0 replies; 7+ messages in thread
From: Rob Herring @ 2022-03-21 18:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Luca Ceresoli, Steffen Trumtrar, Ioana Ciornei,
Bartosz Golaszewski, Rob Herring, Stephen Boyd,
Pengutronix Kernel Team, Thierry Reding, A.s. Dong,
linux-arm-kernel, Fabio Estevam, NXP Linux Team, linux-gpio,
Jonathan Hunter, linux-kernel, Michael Turquette,
Krzysztof Kozlowski, Giulio Benetti, Linus Walleij, linux-clk,
Manivannan Sadhasivam, Shawn Guo, devicetree, Jesse Taube,
linux-tegra, Alexander Shiyan, Sascha Hauer
On Wed, 16 Mar 2022 14:08:57 +0100, Krzysztof Kozlowski wrote:
> Consumer examples in the bindings of resource providers are trivial,
> useless and duplication of code. Remove the example code for consumer
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
> ---
> Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 --------
> 1 file changed, 8 deletions(-)
>
Applied, thanks!
^ permalink raw reply [flat|nested] 7+ messages in thread