Re: [PATCH v2 7/9] dt-bindings: spi: mtk-snfi: Add read latch latency property

["Xiangsheng Hou (侯祥胜)" <Xiangsheng.Hou@mediatek.com>]

Hi Angelo,

On Mon, 2022-12-05 at 15:21 +0100, AngeloGioacchino Del Regno wrote:
> Il 05/12/22 07:57, Xiangsheng Hou ha scritto:
> > Add mediatek,rx-latch-latency property which adjust read delay in
> > the
> > unit of clock cycle.
> > 
> > Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> > ---
> >   .../devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml     | 7
> > +++++++
> >   1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-
> > mtk-snfi.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-
> > mtk-snfi.yaml
> > index bab23f1b11fd..6e6ff8d73fcd 100644
> > --- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-
> > snfi.yaml
> > +++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-
> > snfi.yaml
> > @@ -45,6 +45,13 @@ properties:
> >       description: device-tree node of the accompanying ECC engine.
> >       $ref: /schemas/types.yaml#/definitions/phandle
> >   
> > +  mediatek,rx-latch-latency:
> > +    description: Rx delay to sample data with this value, the
> > value
> > +                 unit is clock cycle.
> 
> Can't we use nanoseconds or microseconds as a unit here, instead of
> clock cycles?

The clock cycle will be various with MediaTek SPI NAND controller which
clock frequency can support 26/52/68/81/104MHz...
It`s may be easy to configure and understand with clock cycle in unit.

Thanks
Xiangsheng Hou