From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lars Persson Subject: [PATCH v3 1/3] mmc: dt: usdhi6rol0: add optional pinctrl binding Date: Wed, 20 Apr 2016 16:53:11 +0200 Message-ID: References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-mmc-owner@vger.kernel.org To: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org Cc: g.liakhovetski@gmx.de, ulf.hansson@linaro.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, Lars Persson List-Id: devicetree@vger.kernel.org Add a pinctrl binding to specify different pin settings for high speed modes and UHS modes. Signed-off-by: Lars Persson --- Documentation/devicetree/bindings/mmc/usdhi6rol0.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt index 8babdaa..6d1b797 100644 --- a/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt +++ b/Documentation/devicetree/bindings/mmc/usdhi6rol0.txt @@ -12,6 +12,12 @@ Optional properties: - vmmc-supply: a phandle of a regulator, supplying Vcc to the card - vqmmc-supply: a phandle of a regulator, supplying VccQ to the card +- pinctrl-names: Can contain a "default" entry and a "state_uhs" + entry. The state_uhs entry is used together with the default + entry when the board requires distinct settings for UHS speeds. + +- pinctrl-N: One property for each name listed in pinctrl-names, see + ../pinctrl/pinctrl-bindings.txt. Additionally any standard mmc bindings from mmc.txt can be used. -- 2.1.4