[PATCH v7 0/5] pci: qcom: Add QCS8300 PCIe support

[PATCH v7 0/5] pci: qcom: Add QCS8300 PCIe support

[Ziyue Zhang]

This series depend on the sa8775p gcc_aux_clock and link_down reset change
https://lore.kernel.org/all/20250529035416.4159963-1-quic_ziyuzhan@quicinc.com/

This series adds document, phy, configs support for PCIe in QCS8300.
It also adds 'link_down' reset for sa8775p.

Have follwing changes:
	- Add dedicated schema for the PCIe controllers found on QCS8300.
	- Add compatible for qcs8300 platform.
	- Add configurations in devicetree for PCIe0, including registers, clocks, interrupts and phy setting sequence.
	- Add configurations in devicetree for PCIe1, including registers, clocks, interrupts and phy setting sequence.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
Changes in v7:
- rebase qcs8300-ride.dtsi change to solve conflicts.
- Link to v6: https://lore.kernel.org/all/20250529035635.4162149-1-quic_ziyuzhan@quicinc.com/

Changes in v6:
- move the qcs8300 and sa8775p phy compatibility entry into the list of PHYs that require six clocks
- Update QCS8300 and sa8775p phy dt, remove aux clock.
- Fixed compile error found by kernel test robot
- Link to v5: https://lore.kernel.org/all/20250507031019.4080541-1-quic_ziyuzhan@quicinc.com/

Changes in v5:
- Add QCOM PCIe controller version in commit msg (Mani)
- Modify platform dts change subject (Dmitry)
- Fixed compile error found by kernel test robot
- Link to v4: https://lore.kernel.org/linux-phy/20241220055239.2744024-1-quic_ziyuzhan@quicinc.com/

Changes in v4:
- Add received tag
- Fixed compile error found by kernel test robot
- Link to v3: https://lore.kernel.org/lkml/202412211301.bQO6vXpo-lkp@intel.com/T/#mdd63e5be39acbf879218aef91c87b12d4540e0f7

Changes in v3:
- Add received tag(Rob & Dmitry)
- Update pcie_phy in gcc node to soc dtsi(Dmitry & Konrad)
- remove pcieprot0 node(Konrad & Mani)
- Fix format comments(Konrad)
- Update base-commit to tag: next-20241213(Bjorn)
- Corrected of_device_id.data from 1.9.0 to 1.34.0.
- Link to v2: https://lore.kernel.org/all/20241128081056.1361739-1-quic_ziyuzhan@quicinc.com/

Changes in v2:
- Fix some format comments and match the style in x1e80100(Konrad)
- Add global interrupt for PCIe0 and PCIe1(Konrad)
- split the soc dtsi and the platform dts into two changes(Konrad)
- Link to v1: https://lore.kernel.org/all/20241114095409.2682558-1-quic_ziyuzhan@quicinc.com/


Ziyue Zhang (5):
  dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings
    for qcs8300
  arm64: dts: qcom: qcs8300: enable pcie0
  arm64: dts: qcom: qcs8300-ride: enable pcie0 interface
  arm64: dts: qcom: qcs8300: enable pcie1
  arm64: dts: qcom: qcs8300-ride: enable pcie1 interface

 .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml       |  14 +-
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts     |  80 +++++
 arch/arm64/boot/dts/qcom/qcs8300.dtsi         | 296 +++++++++++++++++-
 3 files changed, 375 insertions(+), 15 deletions(-)


base-commit: 9354e82d5fd77af919dc8559806253b70db77eb2
-- 
2.34.1

[PATCH v7 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300

[Ziyue Zhang]

The gcc_aux_clk is not required by the PCIe PHY on qcs8300 and is not
specified in the device tree node. Hence, move the qcs8300 phy
compatibility entry into the list of PHYs that require six clocks.

As no compatible need the entry which require seven clocks, delete it.

Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml   | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 57b16444eb0e..10c03831f9e7 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -175,6 +175,7 @@ allOf:
           contains:
             enum:
               - qcom,qcs615-qmp-gen3x1-pcie-phy
+              - qcom,qcs8300-qmp-gen4x2-pcie-phy
               - qcom,sa8775p-qmp-gen4x2-pcie-phy
               - qcom,sa8775p-qmp-gen4x4-pcie-phy
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
@@ -192,19 +193,6 @@ allOf:
         clock-names:
           minItems: 6
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,qcs8300-qmp-gen4x2-pcie-phy
-    then:
-      properties:
-        clocks:
-          minItems: 7
-        clock-names:
-          minItems: 7
-
   - if:
       properties:
         compatible:
-- 
2.34.1

Re: [PATCH v7 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300

[Vinod Koul]

On 25-06-25, 17:25, Ziyue Zhang wrote:
> The gcc_aux_clk is not required by the PCIe PHY on qcs8300 and is not
> specified in the device tree node. Hence, move the qcs8300 phy
> compatibility entry into the list of PHYs that require six clocks.
> 
> As no compatible need the entry which require seven clocks, delete it.

This fails for me on phy/next, can you please rebase
> 
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>  .../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml   | 14 +-------------
>  1 file changed, 1 insertion(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index 57b16444eb0e..10c03831f9e7 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -175,6 +175,7 @@ allOf:
>            contains:
>              enum:
>                - qcom,qcs615-qmp-gen3x1-pcie-phy
> +              - qcom,qcs8300-qmp-gen4x2-pcie-phy
>                - qcom,sa8775p-qmp-gen4x2-pcie-phy
>                - qcom,sa8775p-qmp-gen4x4-pcie-phy
>                - qcom,sc8280xp-qmp-gen3x1-pcie-phy
> @@ -192,19 +193,6 @@ allOf:
>          clock-names:
>            minItems: 6
>  
> -  - if:
> -      properties:
> -        compatible:
> -          contains:
> -            enum:
> -              - qcom,qcs8300-qmp-gen4x2-pcie-phy
> -    then:
> -      properties:
> -        clocks:
> -          minItems: 7
> -        clock-names:
> -          minItems: 7
> -
>    - if:
>        properties:
>          compatible:
> -- 
> 2.34.1

-- 
~Vinod

Re: [PATCH v7 1/5] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300

[Johan Hovold]

On Wed, Jun 25, 2025 at 05:25:35PM +0800, Ziyue Zhang wrote:
> The gcc_aux_clk is not required by the PCIe PHY on qcs8300 and is not
> specified in the device tree node. Hence, move the qcs8300 phy
> compatibility entry into the list of PHYs that require six clocks.
> 
> As no compatible need the entry which require seven clocks, delete it.

Please add the missing Fixes tag.

> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> ---

This patch depends on

	https://lore.kernel.org/lkml/20250625090048.624399-2-quic_ziyuzhan@quicinc.com/

(which you point out in the cover letter), but you should be removing
the bogus 'phy_aux' clock when removing the last user and not before.

Johan

[PATCH v7 2/5] arm64: dts: qcom: qcs8300: enable pcie0

[Ziyue Zhang]

Add configurations in devicetree for PCIe0, including registers, clocks,
interrupts and phy setting sequence.

Add PCIe lane equalization preset properties for 8 GT/s and 16GT/s

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 172 +++++++++++++++++++++++++-
 1 file changed, 171 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7ada029c32c1..7b7009567999 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -619,7 +619,7 @@ gcc: clock-controller@100000 {
 			#power-domain-cells = <1>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
-				 <0>,
+				 <&pcie0_phy>,
 				 <0>,
 				 <0>,
 				 <0>,
@@ -1966,6 +1966,176 @@ mmss_noc: interconnect@17a0000 {
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		pcie0: pci@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs8300", "qcom,pcie-sa8775p";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf20>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x4000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c03000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_anoc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
+				    <0x100 &pcie_smmu 0x0001 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>,
+				 <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555
+						     0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>;
+
+			status = "disabled";
+
+			pcie3_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 and GEN 4 x1 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+				/* GEN 4 x2 */
+				opp-32000000 {
+					opp-hz = /bits/ 64 <32000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <3938000 1>;
+				};
+			};
+		};
+
+		pcie0_phy: phy@1c04000 {
+			compatible = "qcom,qcs8300-qmp-gen4x2-pcie-phy";
+			reg = <0x0 0x01c04000 0x0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-- 
2.34.1

[PATCH v7 3/5] arm64: dts: qcom: qcs8300-ride: enable pcie0 interface

[Ziyue Zhang]

Add configurations in devicetree for PCIe0, board related gpios,
PMIC regulators, etc for qcs8300-ride board.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 40 +++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 8c166ead912c..e8e382db2b99 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -308,6 +308,23 @@ &iris {
 	status = "okay";
 };
 
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l6a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -348,6 +365,29 @@ ethernet0_mdio: ethernet0-mdio-pins {
 			bias-pull-up;
 		};
 	};
+
+	pcie0_default_state: pcie0-default-state {
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
 };
 
 &uart7 {
-- 
2.34.1

[PATCH v7 4/5] arm64: dts: qcom: qcs8300: enable pcie1

[Ziyue Zhang]

Add configurations in devicetree for PCIe1, including registers, clocks,
interrupts and phy setting sequence.

Add PCIe lane equalization preset properties for 8 GT/s and 16GT/s.

Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 124 +++++++++++++++++++++++++-
 1 file changed, 123 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7b7009567999..0dc536494ac7 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -620,7 +620,7 @@ gcc: clock-controller@100000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&sleep_clk>,
 				 <&pcie0_phy>,
-				 <0>,
+				 <&pcie1_phy>,
 				 <0>,
 				 <0>,
 				 <0>,
@@ -2136,6 +2136,128 @@ pcie0_phy: phy@1c04000 {
 			status = "disabled";
 		};
 
+		pcie1: pci@1c10000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs8300", "qcom,pcie-sa8775p";
+			reg = <0x0 0x01c10000 0x0 0x3000>,
+			      <0x0 0x60000000 0x0 0xf20>,
+			      <0x0 0x60000f20 0x0 0xa8>,
+			      <0x0 0x60001000 0x0 0x4000>,
+			      <0x0 0x60100000 0x0 0x100000>,
+			      <0x0 0x01c13000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <1>;
+			num-lanes = <4>;
+
+			interrupts = <GIC_SPI 519 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 518 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_anoc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
+				    <0x100 &pcie_smmu 0x0081 0x1>;
+
+			resets = <&gcc GCC_PCIE_1_BCR>,
+				 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_1_GDSC>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pciephy";
+
+			eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555
+						     0x5555 0x5555 0x5555 0x5555>;
+			eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>;
+
+			status = "disabled";
+		};
+
+		pcie1_phy: phy@1c14000 {
+			compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
+			reg = <0x0 0x01c14000 0x0 0x4000>;
+
+			clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>,
+				 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe",
+				      "pipediv2";
+
+			assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+			reset-names = "phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufs@1d84000 {
 			compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-- 
2.34.1

[PATCH v7 5/5] arm64: dts: qcom: qcs8300-ride: enable pcie1 interface

[Ziyue Zhang]

Add configurations in devicetree for PCIe1, board related gpios,
PMIC regulators, etc for qcs8300-ride platform.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 40 +++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index e8e382db2b99..bec2905c5d8f 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -325,6 +325,23 @@ &pcie0_phy {
 	status = "okay";
 };
 
+&pcie1 {
+	perst-gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l6a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -388,6 +405,29 @@ perst-pins {
 			bias-pull-down;
 		};
 	};
+
+   pcie1_default_state: pcie1-default-state {
+		wake-pins {
+			pins = "gpio21";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio22";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio23";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
 };
 
 &uart7 {
-- 
2.34.1