Re: [PATCH v2 05/12] media: ipu-bridge: Use v4l2_fwnode for unknown rotations

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Ricardo,

On Tue, Jul 08, 2025 at 02:09:28PM +0200, Ricardo Ribalda wrote:
> On Tue, 8 Jul 2025 at 11:22, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> >
> > Hi Ricardo,
> >
> > On Tue, Jul 08, 2025 at 11:16:25AM +0200, Ricardo Ribalda wrote:
> > > Hi Sakari
> > >
> > > Thanks for your review
> > >
> > > On Mon, 7 Jul 2025 at 23:45, Sakari Ailus <sakari.ailus@linux.intel.com> wrote:
> > > >
> > > > Hi Ricardo,
> > > >
> > > > On Thu, Jun 05, 2025 at 05:52:58PM +0000, Ricardo Ribalda wrote:
> > > > > The v4l2_fwnode_device_properties contains information about the
> > > > > rotation. Use it if the ssdb data is inconclusive.
> > > >
> > > > As SSDB and _PLD provide the same information, are they always aligned? Do
> > > > you have any experience on how is this actually in firmware?
> > >
> > > Not really, in ChromeOS we are pretty lucky to control the firmware.
> > >
> > > @HdG Do you have some experience/opinion here?
> > >
> > > >
> > > > _PLD is standardised so it would seem reasonable to stick to that -- if it
> > > > exists. Another approach could be to pick the one that doesn't translate to
> > > > a sane default (0°).
> > >
> > > I'd rather stick to the current prioritization unless there is a
> > > strong argument against it. Otherwise there is a chance that we will
> > > have regressions (outside CrOS)
> >
> > My point was rather there are no such rules currently for rotation: only
> > SSDB was being used by the IPU bridge to obtain the rotation value,
> > similarly only _PLD is consulted when it comes to orientation.
> 
> So something like this:?
> 
> static u32 ipu_bridge_parse_rotation(struct acpi_device *adev,
>                                      struct ipu_sensor_ssdb *ssdb,
>                                      struct
> v4l2_fwnode_device_properties *props)
> {
>         if (props->rotation != V4L2_FWNODE_PROPERTY_UNSET)
>                 return props->rotation;
> 
>         switch (ssdb->degree) {
>         case IPU_SENSOR_ROTATION_NORMAL:
>                 return 0;
>         case IPU_SENSOR_ROTATION_INVERTED:
>                 return 180;
>         }
> 
>         dev_warn(ADEV_DEV(adev),
>                  "Unknown rotation %d. Assume 0 degree rotation\n",
>                  ssdb->degree);

Maybe:

	acpi_handle_warn(acpi_device_handle(adev), ...);

?

>         return 0;
> }

Looks good to me. Maybe something similar for orientation?

-- 
Regards,

Sakari Ailus