[PATCH V2 1/2] arm64: dts: imx8mm: Configure DMA on UART2

[PATCH V2 1/2] arm64: dts: imx8mm: Configure DMA on UART2

[Adam Ford]

UART2 is often used as the console, so the DMA was likely left
off on purpose, since it's recommended to not use the DMA on the
console. Because, the driver checks to see if the UART is used for
the console when determining if it should initialize DMA, it
should be safe to enable DMA on UART2 for all users.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
V2:  Fix spelling errors in commit message

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index cfebaa01217e..ded89b046970 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -915,6 +915,8 @@ uart2: serial@30890000 {
 					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
 						 <&clk IMX8MM_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
-- 
2.48.1

[PATCH V2 2/2] arm64: dts: imx8mn: Configure DMA on UART2

[Adam Ford]

UART2 is often used as the console, so the DMA was likely left
off on purpose, since it's recommended to not use the DMA on the
console. Because, the driver checks to see if the UART is used for
the console when determining if it should initialize DMA, it
should be safe to enable DMA on UART2 for all users.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2:  Fix spelling errors in commit message

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 848ba5e46ee6..b98b3d0ddf25 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -860,6 +860,8 @@ uart2: serial@30890000 {
 					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
 						 <&clk IMX8MN_CLK_UART2_ROOT>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 			};
-- 
2.48.1

Re: [PATCH V2 2/2] arm64: dts: imx8mn: Configure DMA on UART2

[Ahmad Fatoum]

On 7/3/25 13:38, Adam Ford wrote:
> UART2 is often used as the console, so the DMA was likely left
> off on purpose, since it's recommended to not use the DMA on the
> console. Because, the driver checks to see if the UART is used for
> the console when determining if it should initialize DMA, it
> should be safe to enable DMA on UART2 for all users.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
> V2:  Fix spelling errors in commit message
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 848ba5e46ee6..b98b3d0ddf25 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -860,6 +860,8 @@ uart2: serial@30890000 {
>  					clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
>  						 <&clk IMX8MN_CLK_UART2_ROOT>;
>  					clock-names = "ipg", "per";
> +					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> +					dma-names = "rx", "tx";
>  					status = "disabled";
>  				};
>  			};

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

Re: [PATCH V2 1/2] arm64: dts: imx8mm: Configure DMA on UART2

[Ahmad Fatoum]

On 7/3/25 13:38, Adam Ford wrote:
> UART2 is often used as the console, so the DMA was likely left
> off on purpose, since it's recommended to not use the DMA on the
> console. Because, the driver checks to see if the UART is used for
> the console when determining if it should initialize DMA, it
> should be safe to enable DMA on UART2 for all users.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> ---
> V2:  Fix spelling errors in commit message
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index cfebaa01217e..ded89b046970 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -915,6 +915,8 @@ uart2: serial@30890000 {
>  					clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
>  						 <&clk IMX8MM_CLK_UART2_ROOT>;
>  					clock-names = "ipg", "per";
> +					dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> +					dma-names = "rx", "tx";
>  					status = "disabled";
>  				};
>  			};

-- 
Pengutronix e.K.                  |                             |
Steuerwalder Str. 21              | http://www.pengutronix.de/  |
31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

Re: [PATCH V2 1/2] arm64: dts: imx8mm: Configure DMA on UART2

[Shawn Guo]

On Thu, Jul 03, 2025 at 06:38:09AM -0500, Adam Ford wrote:
> UART2 is often used as the console, so the DMA was likely left
> off on purpose, since it's recommended to not use the DMA on the
> console. Because, the driver checks to see if the UART is used for
> the console when determining if it should initialize DMA, it
> should be safe to enable DMA on UART2 for all users.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>

Applied both, thanks!