Re: [PATCH v2 06/10] dt-bindings: display: imx: Add bindings for i.MX94 DCIF

[Frank Li <Frank.li@nxp.com>]

On Wed, Jul 16, 2025 at 11:15:10AM +0300, Laurentiu Palcu wrote:
> DCIF is the i.MX94 Display Controller Interface which is used to
> drive a TFT LCD panel or connects to a display interface depending
> on the chip configuration.
>
> Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> ---
>  .../bindings/display/imx/nxp,imx94-dcif.yaml  | 93 +++++++++++++++++++
>  1 file changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
> new file mode 100644
> index 0000000000000..207ddf0f550df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx94-dcif.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2025 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/imx/nxp,imx94-dcif.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX94 Display Control Interface (DCIF)
> +
> +maintainers:
> +  - Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
> +
> +description:
> +  The Display Control Interface(DCIF) is a system master that fetches graphics
> +  stored in memory and displays them on a TFT LCD panel or connects to a
> +  display interface depending on the chip configuration.
> +
> +properties:
> +  compatible:
> +    const: nxp,imx94-dcif
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    items:
> +      - description:
> +          Interrupt output for CPU domain 0 (controlled by common registers group).
> +      - description:
> +          Interrupt output for CPU domain 1 (controlled by background layer registers group).
> +      - description:
> +          Interrupt output for CPU domain 2 (controlled by foreground layer registers group).
> +
> +  interrupt-names:
> +    items:
> +      - const: common
> +      - const: bg_layer
> +      - const: fg_layer
> +
> +  clocks:
> +    items:
> +      - description: APB bus clock
> +      - description: AXI bus clock
> +      - description: Pixel clock

dupicated information with clock-names.

	maxItems: 3

If clock-names provided, clocks genernally just need maxItems except description
can provide more information than clock names.

Frank
> +
> +  clock-names:
> +    items:
> +      - const: apb
> +      - const: axi
> +      - const: pix
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  nxp,blk-ctrl:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: A phandle which points to NXP displaymix blk-ctrl.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description: Display Pixel Interface(DPI) output port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        display-controller@4b120000 {
> +            compatible = "nxp,imx94-dcif";
> +            reg = <0x0 0x4b120000 0x0 0x300000>;
> +            interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "common", "bg_layer", "fg_layer";
> +            clocks = <&scmi_clk 69>, <&scmi_clk 70>, <&dispmix_csr 0>;
> +            clock-names = "apb", "axi", "pix";
> +            assigned-clocks = <&dispmix_csr 0>;
> +            assigned-clock-parents = <&ldb_pll_pixel>;
> +            power-domains = <&scmi_devpd 11>;
> +            nxp,blk-ctrl = <&dispmix_csr>;
> +
> +            port {
> +                dcif_out: endpoint {
> +                    remote-endpoint = <&ldb_in>;
> +                };
> +            };
> +        };
> +    };
> --
> 2.34.1
>