Re: [PATCH 2/8] arm64: dts: s32g274-rd2: Enable the STM timers

[Frank Li <Frank.li@nxp.com>]

On Wed, Jul 30, 2025 at 09:50:15PM +0200, Daniel Lezcano wrote:
> Enable the timers STM0 -> STM3 on the s32g274-rd2
>
> The platform has 4 CPUs and the Linux STM timer driver is per
> CPU. Enable 4 timers which will be used, other timers are useless for
> the Linux kernel and there is no benefit to enable them.

S32 have not ARM local timer? It is quite strange!

Frank

>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
> Cc: Thomas Fossati <thomas.fossati@linaro.org>
> ---
>  arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> index b5ba51696f43..505776d19151 100644
> --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> @@ -40,6 +40,22 @@ &uart1 {
>  	status = "okay";
>  };
>
> +&stm0 {
> +	status = "okay";
> +};
> +
> +&stm1 {
> +	status = "okay";
> +};
> +
> +&stm2 {
> +	status = "okay";
> +};
> +
> +&stm3 {
> +	status = "okay";
> +};
> +
>  &usdhc0 {
>  	pinctrl-names = "default", "state_100mhz", "state_200mhz";
>  	pinctrl-0 = <&pinctrl_usdhc0>;
> --
> 2.43.0
>