Re: (subset) [PATCH v21 0/9] PCI: EP: Add RC-to-EP doorbell with platform MSI controller

[Frank Li <Frank.li@nxp.com>]

On Mon, Sep 08, 2025 at 05:08:35PM +0200, Niklas Cassel wrote:
> On Mon, Jul 21, 2025 at 08:48:11PM +0530, Manivannan Sadhasivam wrote:
> > On Thu, 10 Jul 2025 15:13:46 -0400, Frank Li wrote:
> > > [...]
> >
> > Applied, thanks!
> >
> > [3/9] PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
> >       commit: b537ffe0eb2ab458f20ec135cc2b565c63a2ea00
> > [4/9] PCI: endpoint: pci-ep-msi: Add MSI address/data pair mutable check
> >       commit: 1f2ed78e43abb9ac0856a82867f64d472368a832
> > [5/9] PCI: endpoint: Add pci_epf_align_inbound_addr() helper for address alignment
> >       commit: 1c2c5f9855a5cf4617bcda721c22dbd3345f06a1
> > [6/9] PCI: endpoint: pci-epf-test: Add doorbell test support
> >       commit: 5d4da5f8092e5a77ae371ae1112283b59790ac22
> > [7/9] misc: pci_endpoint_test: Add doorbell test case
> >       commit: a1a293e709a4ec0fa2e4253993a4b75f581c6cf2
> > [8/9] selftests: pci_endpoint: Add doorbell test case
> >       commit: b964b4894fcfc72e7496cf52a33cbba39d094c5b
>
>
> Hello all,
>
> I wanted to test this on rk3588, so I added msi-map to the pcie_ep node.
>
> It works the first time:
> # ./pcitest -r pcie_ep_doorbell.DOORBELL_TEST
> TAP version 13
> 1..1
> # Starting 1 tests from 1 test cases.
> #  RUN           pcie_ep_doorbell.DOORBELL_TEST ...
> [   17.996519] offset: 70040
> [   17.997904] left: 250 status: 0x240
> #            OK  pcie_ep_doorbell.DOORBELL_TEST
> ok 1 pcie_ep_doorbell.DOORBELL_TEST
> # PASSED: 1 / 1 tests passed.
> # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
>
> Prints on EP side:
> [   17.924761] pci_epf_test_enable_doorbell
> [   17.926035] doorbell offset: 70040
> [   17.927898] pci_epf_test_doorbell_handler
> [   17.932816] pci_epf_test_disable_doorbell
>
>
>
> However, if I run the exact same test case again:
> # ./pcitest -r pcie_ep_doorbell.DOORBELL_TEST
> TAP version 13
> 1..1
> # Starting 1 tests from 1 test cases.
> RUN           pcie_ep_doorbell.DOORBELL_TEST ...
> [   34.672546] offset: 70040
> [   35.688190] left: 0 status: 0x0
> [   35.688480] pci-endpoint-test 0000:01:00.0: Failed to trigger doorbell in endpoint
> # pci_endpoint_test.c:258:DOORBELL_TEST:Expected 0 (0) == ret (-22)
> # pci_endpoint_test.c:258:DOORBELL_TEST:Test failed for Doorbell
>
> # DOORBELL_TEST: Test failed
> #          FAIL  pcie_ep_doorbell.DOORBELL_TEST
> not ok 1 pcie_ep_doorbell.DOORBELL_TEST
> # FAILED: 0 / 1 tests passed.
>
> Prints on EP side:
> [   34.600717] pci_epf_test_enable_doorbell
> [   34.602086] doorbell offset: 70040
> [   35.624718] pci_epf_test_disable_doorbell
>
>
>
> As you can see the print that I added in pci_epf_test_doorbell_handler()
> never comes the second time executing this test case.
>
>
> Frank, do you see the same problem?

I have not tested latest one yet. Look like inbound address have not switch
back to MSI ITS address after disable() and enable().

Frank
>
>
> Kind regards,
> Niklas