Re: [PATCH 2/3] dt-bindings: Add CTF2301 devicetree bindings

[Troy Mitchell <troy.mitchell@linux.dev>]

Hi Rob, Thanks for your review.

On Tue, Sep 16, 2025 at 08:52:16AM -0500, Rob Herring wrote:
> On Tue, Sep 16, 2025 at 12:46:45PM +0800, Troy Mitchell wrote:
> > Add dt-binding for the hwmon driver of Sensylink's CTF2301 chip.
> > 
> > Signed-off-by: Troy Mitchell <troy.mitchell@linux.dev>
> > ---
> >  .../bindings/hwmon/sensylink,ctf2301.yaml          | 49 ++++++++++++++++++++++
> >  1 file changed, 49 insertions(+)
> > +description: |
> > +  The CTF2301B is an I2C/SMBus compatible device featuring:
> > +    - One local temperature sensor with ±0.5°C accuracy and 0.0625°C resolution.
> > +    - One remote temperature sensor for external diode-connected transistors, offering ±1°C accuracy and 0.125°C resolution (temperature range: -40°C to +125°C).
> 
> Wrap at 80 chars.
I'll fix it in the next version.
> 
> > +    - An integrated PWM fan controller.
> > +    - A 1-channel fan speed monitor (TACH input) for RPM measurement.
> > +
> > +  Datasheets:
> > +    https://www.sensylink.com/upload/1/net.sensylink.portal/1689557281035.pdf
> > +
> > +properties:
> > +  compatible:
> > +    const:
> > +      - sensylink,ctf2301
I will fix this warning in the next version (your robot reported)

                - Troy
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        ctf2301@4c {
> > +            compatible = "sensylink,ctf2301";
> > +            reg = <0x4c>;
> > +        };
> > +    };
> > 
> > -- 
> > 2.51.0
> >