From: Geraldo Nascimento <geraldogabriel@gmail.com>
To: 张烨 <ye.zhang@rock-chips.com>
Cc: "Shawn Lin" <shawn.lin@rock-chips.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Heiko Stuebner" <heiko@sntech.de>,
linux-pci <linux-pci@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
devicetree <devicetree@vger.kernel.org>,
krzk+dt <krzk+dt@kernel.org>, conor+dt <conor+dt@kernel.org>,
"Johan Jonker" <jbx6244@gmail.com>,
linux-rockchip <linux-rockchip@lists.infradead.org>,
"Simon Glass" <sjg@chromium.org>,
"Philipp Tomsich" <philipp.tomsich@vrull.eu>,
"Kever Yang" <kever.yang@rock-chips.com>,
"Tom Rini" <trini@konsulko.com>,
u-boot@lists.denx.de
Subject: Re: [PATCH] arm64: dts: rockchip: align bindings to PCIe spec
Date: Fri, 14 Nov 2025 01:41:46 -0300 [thread overview]
Message-ID: <aRazCssWVdAOmy7D@geday> (raw)
In-Reply-To: <aRUvr0UggTYkkCZ_@geday>
On Wed, Nov 12, 2025 at 10:09:15PM -0300, Geraldo Nascimento wrote:
> Hi Ye, Shawn,
>
> Here's more contained workaround without resorting to clearing DDR to
> INPUT for every GPIO:
>
> diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
> index ee1822ca01db..1d89131ec6ac 100644
> --- a/drivers/pci/controller/pcie-rockchip-host.c
> +++ b/drivers/pci/controller/pcie-rockchip-host.c
> @@ -315,7 +315,8 @@ static int rockchip_pcie_host_init_port(struct rockchip_pcie *rockchip)
> PCIE_CLIENT_CONFIG);
>
> msleep(PCIE_T_PVPERL_MS);
> - gpiod_set_value_cansleep(rockchip->perst_gpio, 1);
> + gpiod_direction_input(rockchip->perst_gpio);
> + gpiod_direction_output(rockchip->perst_gpio, 1);
>
> msleep(PCIE_RESET_CONFIG_WAIT_MS);
>
> This results in working PCIe for me, pass initial link training.
Sorry for the inconvenience of more mail, but I'm providing as much
detail as I can.
This hack has been confirmed to work in U-boot also.
diff --git a/drivers/pci/pcie_rockchip.c b/drivers/pci/pcie_rockchip.c
index 19f9e58a640..5702b607ee6 100644
--- a/drivers/pci/pcie_rockchip.c
+++ b/drivers/pci/pcie_rockchip.c
@@ -329,8 +329,10 @@ static int rockchip_pcie_init_port(struct udevice *dev)
writel(PCIE_CLIENT_LINK_TRAIN_ENABLE,
priv->apb_base + PCIE_CLIENT_CONFIG);
- if (dm_gpio_is_valid(&priv->ep_gpio))
- dm_gpio_set_value(&priv->ep_gpio, 1);
+ if (dm_gpio_is_valid(&priv->ep_gpio)) {
+ dm_gpio_set_dir_flags(&priv->ep_gpio, (priv->ep_gpio.flags & ~GPIOD_IS_OUT) | GPIOD_IS_IN);
+ dm_gpio_set_dir_flags(&priv->ep_gpio, (priv->ep_gpio.flags & ~GPIOD_IS_IN) | GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ }
ret = readl_poll_sleep_timeout
(priv->apb_base + PCIE_CLIENT_BASIC_STATUS1,
So my report suggests this is not specific to Linux and because same
workaround works in U-boot simplified driver model I suggest you check
from your side.
Previously PCIe link training timeout, not working. Now I'm very happy
with working PCIe in Linux and U-boot.
Thanks,
Geraldo Nascimento
next prev parent reply other threads:[~2025-11-14 4:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-05 5:55 [PATCH] arm64: dts: rockchip: align bindings to PCIe spec Geraldo Nascimento
2025-11-05 6:35 ` Shawn Lin
2025-11-05 8:18 ` Geraldo Nascimento
2025-11-05 8:56 ` Shawn Lin
2025-11-05 20:02 ` Geraldo Nascimento
2025-11-07 2:43 ` Geraldo Nascimento
2025-11-07 3:01 ` Shawn Lin
2025-11-08 22:12 ` Sebastian Reichel
2025-11-08 22:43 ` Geraldo Nascimento
2025-11-11 5:06 ` Geraldo Nascimento
[not found] ` <AGsAmwCFJj0ZQ4vKzrqC84rs.3.1762847224180.Hmail.ye.zhang@rock-chips.com>
2025-11-12 8:03 ` Geraldo Nascimento
2025-11-13 1:09 ` Geraldo Nascimento
2025-11-14 4:41 ` Geraldo Nascimento [this message]
2025-11-14 9:16 ` Shawn Lin
2025-11-14 20:34 ` Geraldo Nascimento
2025-11-15 2:21 ` Shawn Lin
2025-11-15 7:02 ` Geraldo Nascimento
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aRazCssWVdAOmy7D@geday \
--to=geraldogabriel@gmail.com \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jbx6244@gmail.com \
--cc=kever.yang@rock-chips.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=philipp.tomsich@vrull.eu \
--cc=robh@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=ye.zhang@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).