[GIT PULL] RISC-V Tenstorrent Devicetree for v6.19

[GIT PULL] RISC-V Tenstorrent Devicetree for v6.19

[Drew Fustini]

Hi Arnd,

Please pull these changes which add Tenstorrent as a vendor and enable
support for Blackhole. It adds the appropriate entries in MAINTAINERS.
The changes all come from a single series [1] posted by myself. Joel
Stanley has reviewed and tested all the patches. Rob acked or reviewed
all the bindings patches. W=1 dtbs_check and dt_binding_check produce
no warnings.

[1] https://lore.kernel.org/linux-riscv/20251013-tt-bh-dts-v3-0-9f058d4bbbda@oss.tenstorrent.com/

Thanks,
Drew

The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:

  Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)

are available in the Git repository at:

  git@github.com:tenstorrent/linux.git tags/tenstorrent-dt-for-v6.19

for you to fetch changes up to a71e6e8eea8ae2d624f097911f43357bba06d2a5:

  riscv: defconfig: Enable Tenstorrent SoCs (2025-10-18 10:44:15 -0700)

----------------------------------------------------------------
Tenstorrent device tree for v6.19

Add Tenstorrent as a vendor and enable support for the Blackhole SoC
in Blackhole P100 and P150 PCIe cards. The SoC contains four RISC-V
CPU tiles consisting of 4x SiFive X280 cores.

There is a virtual UART implemented in OpenSBI firmware that allows a
console program on the PCIe host to communicate through shared memory
with Linux running on the Blackhole card.

Link: https://github.com/tenstorrent/tt-bh-linux
Link: https://github.com/tenstorrent/opensbi/
Signed-off-by: Drew Fustini <fustini@kernel.org>

----------------------------------------------------------------
Drew Fustini (8):
      dt-bindings: vendor-prefixes: Add Tenstorrent AI ULC
      dt-bindings: riscv: Add Tenstorrent Blackhole compatible
      dt-bindings: riscv: cpus: Add SiFive X280 compatible
      dt-bindings: timers: Add Tenstorrent Blackhole compatible
      dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
      riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
      riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
      riscv: defconfig: Enable Tenstorrent SoCs

 .../interrupt-controller/sifive,plic-1.0.0.yaml    |   1 +
 Documentation/devicetree/bindings/riscv/cpus.yaml  |   1 +
 .../devicetree/bindings/riscv/tenstorrent.yaml     |  28 ++++++
 .../devicetree/bindings/timer/sifive,clint.yaml    |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
 MAINTAINERS                                        |   9 ++
 arch/riscv/Kconfig.socs                            |   8 ++
 arch/riscv/boot/dts/Makefile                       |   1 +
 arch/riscv/boot/dts/tenstorrent/Makefile           |   2 +
 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts |  14 +++
 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi     | 108 +++++++++++++++++++++
 arch/riscv/configs/defconfig                       |   1 +
 12 files changed, 176 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/tenstorrent.yaml
 create mode 100644 arch/riscv/boot/dts/tenstorrent/Makefile
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole-card.dts
 create mode 100644 arch/riscv/boot/dts/tenstorrent/blackhole.dtsi

Re: [GIT PULL] RISC-V Tenstorrent Devicetree for v6.19

[Arnd Bergmann]

On Sun, Oct 19, 2025, at 19:23, Drew Fustini wrote:
> Hi Arnd,
>
> Please pull these changes which add Tenstorrent as a vendor and enable
> support for Blackhole. It adds the appropriate entries in MAINTAINERS.
> The changes all come from a single series [1] posted by myself. Joel
> Stanley has reviewed and tested all the patches. Rob acked or reviewed
> all the bindings patches. W=1 dtbs_check and dt_binding_check produce
> no warnings.
>
> [1] 
> https://lore.kernel.org/linux-riscv/20251013-tt-bh-dts-v3-0-9f058d4bbbda@oss.tenstorrent.com/
>
> Thanks,
> Drew
>
> The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:
>
>   Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)
>
> are available in the Git repository at:
>
>   git@github.com:tenstorrent/linux.git tags/tenstorrent-dt-for-v6.19
>

I pulled this one manually as you had the wrong URL here, please
use an https:// url for git pull. You can do this e.g. by adding

[url "https://github.com"]
    insteadOf = git@github.com:

to your .gitconfig.

       Arnd

Re: [GIT PULL] RISC-V Tenstorrent Devicetree for v6.19

[Drew Fustini]

On Fri, Nov 21, 2025 at 09:49:42PM +0100, Arnd Bergmann wrote:
> On Sun, Oct 19, 2025, at 19:23, Drew Fustini wrote:
> > Hi Arnd,
> >
> > Please pull these changes which add Tenstorrent as a vendor and enable
> > support for Blackhole. It adds the appropriate entries in MAINTAINERS.
> > The changes all come from a single series [1] posted by myself. Joel
> > Stanley has reviewed and tested all the patches. Rob acked or reviewed
> > all the bindings patches. W=1 dtbs_check and dt_binding_check produce
> > no warnings.
> >
> > [1] 
> > https://lore.kernel.org/linux-riscv/20251013-tt-bh-dts-v3-0-9f058d4bbbda@oss.tenstorrent.com/
> >
> > Thanks,
> > Drew
> >
> > The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:
> >
> >   Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)
> >
> > are available in the Git repository at:
> >
> >   git@github.com:tenstorrent/linux.git tags/tenstorrent-dt-for-v6.19
> >
> 
> I pulled this one manually as you had the wrong URL here, please
> use an https:// url for git pull. You can do this e.g. by adding
> 
> [url "https://github.com"]
>     insteadOf = git@github.com:
> 
> to your .gitconfig.
> 
>        Arnd

Sorry about that. I will make sure I give the correct url next time.

Thanks,
Drew