[PATCH 1/2] arm64: dts: tqma8mpql-mba8mpxl: Configure multiple queues on eqos

[PATCH 1/2] arm64: dts: tqma8mpql-mba8mpxl: Configure multiple queues on eqos

[Alexander Stein]

The MBa8MPxL mainboard has an integrated PHY connected to the EQOS
ethernet controller which can support up to five queues. Configure
these queues in the same manor as done on the imx8mp-evk.
Setting DMA to threas mode is necessary to prevent FIFO overflows, see
commit 0bc3e333a0c82 ("arm64: dts: imx8mp-evk: configure multiple queues
on eqos")

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 68cecb0987b6b..eb25828f3b26d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -360,6 +360,9 @@ &eqos {
 	pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy3>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
 	status = "okay";
 
 	mdio {
@@ -404,6 +407,70 @@ led@2 {
 			};
 		};
 	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
 };
 
 &fec {
-- 
2.43.0

[PATCH 2/2] arm64: dts: tqma8mpql-mba8mp-ras314: Configure multiple queues on eqos

[Alexander Stein]

The MBa8MP-RAS314 mainboard has an integrated PHY connected to the EQOS
ethernet controller which can support up to five queues. Configure
these queues in the same manor as done on the imx8mp-evk.
Setting DMA to threas mode is necessary to prevent FIFO overflows, see
commit 0bc3e333a0c82 ("arm64: dts: imx8mp-evk: configure multiple queues
on eqos")

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 .../imx8mp-tqma8mpql-mba8mp-ras314.dts        | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index 204bbf0719890..b0d058833fbbb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -184,6 +184,9 @@ &eqos {
 	pinctrl-0 = <&pinctrl_eqos>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy3>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
 	status = "okay";
 
 	mdio {
@@ -209,6 +212,70 @@ ethphy3: ethernet-phy@3 {
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 		};
 	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
 };
 
 &fec {
-- 
2.43.0

Re: [PATCH 1/2] arm64: dts: tqma8mpql-mba8mpxl: Configure multiple queues on eqos

[Shawn Guo]

On Mon, Dec 22, 2025 at 09:18:08AM +0100, Alexander Stein wrote:
> The MBa8MPxL mainboard has an integrated PHY connected to the EQOS
> ethernet controller which can support up to five queues. Configure
> these queues in the same manor as done on the imx8mp-evk.
> Setting DMA to threas mode is necessary to prevent FIFO overflows, see
> commit 0bc3e333a0c82 ("arm64: dts: imx8mp-evk: configure multiple queues
> on eqos")
> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

Doesn't seem to apply to my branch.

Shawn