* [PATCH v3 2/3] arm64: dts: freescale: Add support for Variscite DART-MX95
2026-01-05 10:24 [PATCH v3 0/3] Add support for Variscite DART-MX95 and Sonata board Stefano Radaelli
2026-01-05 10:24 ` [PATCH v3 1/3] dt-bindings: arm: fsl: add Variscite DART-MX95 Boards Stefano Radaelli
@ 2026-01-05 10:24 ` Stefano Radaelli
2026-01-05 13:10 ` Fabio Estevam
2026-01-06 10:26 ` Peng Fan
2026-01-05 10:24 ` [PATCH v3 3/3] arm64: dts: imx95-var-dart: Add support for Variscite Sonata board Stefano Radaelli
2 siblings, 2 replies; 7+ messages in thread
From: Stefano Radaelli @ 2026-01-05 10:24 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Stefano Radaelli, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Alexander Stein, Dario Binacchi, Markus Niebel, Primoz Fiser,
Yannic Moog, Josua Mayer, Francesco Dolcini, imx,
linux-arm-kernel
From: Stefano Radaelli <stefano.r@variscite.com>
Add device tree support for the Variscite DART-MX95 system on module.
This SOM is designed to be used with various carrier boards.
The module includes:
- NXP i.MX95 MPU processor
- Up to 16GB of LPDDR5 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth
Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.
Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-95/dart-mx95/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3:
- Fix specific node name with generic one
- Audio regulator cleanup
.../boot/dts/freescale/imx95-var-dart.dtsi | 461 ++++++++++++++++++
1 file changed, 461 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
new file mode 100644
index 000000000000..ac9691aa73f3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart.dtsi
@@ -0,0 +1,461 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common dtsi for Variscite DART-MX95
+ *
+ * Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-95/dart-mx95/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+/ {
+ model = "Variscite DART-MX95 Module";
+ compatible = "variscite,var-dart-mx95", "fsl,imx95";
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x80000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8_SW";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_SW";
+ };
+
+ reg_audio: regulator-audio-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8904_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vref_1v8: regulator-adc-vref {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ reserved-memory {
+ ranges;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ linux_cma: linux,cma {
+ compatible = "shared-dma-pool";
+ alloc-ranges = <0 0x80000000 0 0x7F000000>;
+ reusable;
+ size = <0 0x3c000000>;
+ linux,cma-default;
+ };
+
+ vdev0vring0: vdev0vring0@88000000 {
+ reg = <0 0x88000000 0 0x8000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1@88008000 {
+ reg = <0 0x88008000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring0: vdev1vring0@88010000 {
+ reg = <0 0x88010000 0 0x8000>;
+ no-map;
+ };
+
+ vdev1vring1: vdev1vring1@88018000 {
+ reg = <0 0x88018000 0 0x8000>;
+ no-map;
+ };
+
+ vdevbuffer: vdevbuffer@88020000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x88020000 0 0x100000>;
+ no-map;
+ };
+
+ rsc_table: rsc-table@88220000 {
+ reg = <0 0x88220000 0 0x1000>;
+ no-map;
+ };
+
+ vpu_boot: vpu_boot@a0000000 {
+ reg = <0 0xa0000000 0 0x100000>;
+ no-map;
+ };
+ };
+
+ sound-wm8904 {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "wm8904-audio";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "IN1L", "Microphone Jack",
+ "IN1R", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&wm8904>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <10000>;
+ reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>, /* WIFI_RESET */
+ <&gpio2 27 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+ status = "okay";
+};
+
+&enetc_port0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc0>;
+ phy-handle = <ðphy0>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&lpi2c8 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default","gpio","sleep";
+ pinctrl-0 = <&pinctrl_lpi2c8>;
+ pinctrl-1 = <&pinctrl_lpi2c8_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c8_gpio>;
+ scl-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ wm8904: audio-codec@1a {
+ compatible = "wlf,wm8904";
+ reg = <0x1a>;
+ #sound-dai-cells = <0>;
+ clocks = <&scmi_clk IMX95_CLK_SAI3>;
+ clock-names = "mclk";
+ AVDD-supply = <®_audio>;
+ CPVDD-supply = <®_audio>;
+ DBVDD-supply = <®_audio>;
+ DCVDD-supply = <®_audio>;
+ MICVDD-supply = <®_audio>;
+ wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+ "soft", "music";
+ /*
+ * Config registers per name, respectively:
+ * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1
+ * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1
+ * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1
+ * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1
+ * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+ */
+ wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+ /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+ /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+ /* GPIO1 = DMIC_CLK, don't touch others */
+ wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+ };
+};
+
+/* BT */
+&lpuart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "nxp,88w8987-bt";
+ };
+};
+
+&mu7 {
+ status = "okay";
+};
+
+&netc_emdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emdio>, <&pinctrl_phy0res>;
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reset-gpios = <&gpio5 16 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+ };
+};
+
+&netc_timer {
+ status = "okay";
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&scmi_clk IMX95_CLK_SAI3>;
+ assigned-clock-parents = <0>, <0>, <0>, <0>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+ assigned-clock-rates = <3932160000>,
+ <3612672000>, <393216000>,
+ <361267200>, <12288000>;
+ #sound-dai-cells = <0>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&scmi_iomuxc {
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28 0x31e
+ >;
+ };
+
+ pinctrl_emdio: emdiogrp{
+ fsl,pins = <
+ IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC 0x57e
+ IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO 0x97e
+ >;
+ };
+
+ pinctrl_phy0res: phy0resgrp{
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e
+ >;
+ };
+
+ pinctrl_enetc0: enetc0grp {
+ fsl,pins = <
+ IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3 0x57e
+ IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2 0x57e
+ IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1 0x57e
+ IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0 0x57e
+ IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK 0x58e
+ IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK 0x58e
+ IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0 0x57e
+ IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1 0x57e
+ IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2 0x57e
+ IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3 0x57e
+ >;
+ };
+
+ pinctrl_lpi2c8: lpi2c8grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO10__LPI2C8_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO11__LPI2C8_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c8_gpio: lpi2c8gpiogrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO10__GPIO2_IO_BIT10 0x31e
+ IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e
+ IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e
+ IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e
+ IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e
+ IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO00__LPUART5_TX 0x31e
+ IMX95_PAD_GPIO_IO01__LPUART5_RX 0x31e
+ IMX95_PAD_GPIO_IO02__LPUART5_CTS_B 0x31e
+ IMX95_PAD_GPIO_IO03__LPUART5_RTS_B 0x31e
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe
+ IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe
+ IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
+ IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
+ IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe
+ IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe
+ IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe
+ IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
+ IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
+ IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
+ IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
+ >;
+ };
+
+ pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO27__GPIO2_IO_BIT27 0x31e
+ IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29 0x31e
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e
+ IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
+ IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
+ IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
+ IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD3_CLK__USDHC3_CLK 0x158e
+ IMX95_PAD_SD3_CMD__USDHC3_CMD 0x138e
+ IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x138e
+ IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x138e
+ IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x138e
+ IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x138e
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD3_CLK__USDHC3_CLK 0x15fe
+ IMX95_PAD_SD3_CMD__USDHC3_CMD 0x13fe
+ IMX95_PAD_SD3_DATA0__USDHC3_DATA0 0x13fe
+ IMX95_PAD_SD3_DATA1__USDHC3_DATA1 0x13fe
+ IMX95_PAD_SD3_DATA2__USDHC3_DATA2 0x13fe
+ IMX95_PAD_SD3_DATA3__USDHC3_DATA3 0x13fe
+ >;
+ };
+};
+
+/* eMMC */
+&usdhc1 {
+ pinctrl-names = "default","state_100mhz","state_200mhz","sleep";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ pinctrl-3 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+/* WiFi */
+&usdhc3 {
+ pinctrl-names = "default","state_100mhz","state_200mhz","sleep";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ wakeup-source;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&wdog3 {
+ fsl,ext-reset-output;
+ status = "okay";
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v3 3/3] arm64: dts: imx95-var-dart: Add support for Variscite Sonata board
2026-01-05 10:24 [PATCH v3 0/3] Add support for Variscite DART-MX95 and Sonata board Stefano Radaelli
2026-01-05 10:24 ` [PATCH v3 1/3] dt-bindings: arm: fsl: add Variscite DART-MX95 Boards Stefano Radaelli
2026-01-05 10:24 ` [PATCH v3 2/3] arm64: dts: freescale: Add support for Variscite DART-MX95 Stefano Radaelli
@ 2026-01-05 10:24 ` Stefano Radaelli
2 siblings, 0 replies; 7+ messages in thread
From: Stefano Radaelli @ 2026-01-05 10:24 UTC (permalink / raw)
To: devicetree, linux-kernel
Cc: Stefano Radaelli, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Alexander Stein, Dario Binacchi, Primoz Fiser, Markus Niebel,
Yannic Moog, Josua Mayer, Francesco Dolcini, imx,
linux-arm-kernel
From: Stefano Radaelli <stefano.r@variscite.com>
Add device tree support for the Variscite Sonata carrier board with
the DART-MX95 system on module.
The Sonata board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- 10Gb Ethernet SFP+ connector
- Uart interfaces
- OV5640 Camera support
- GPIO Expanders
- RTC module
- TPM module
- PCIE support
Link: https://variscite.com/carrier-boards/sonata-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3:
- Fix specific node names with generic ones
- Remove fixed-link property for SFP
v2:
- Add SFP cage node for enetc_port2 following sff,sfp.yaml binding
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../dts/freescale/imx95-var-dart-sonata.dts | 590 ++++++++++++++++++
2 files changed, 591 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f30d3fd724d0..411f86013ec6 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -404,6 +404,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-var-dart-sonata.dtb
imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk-pcie0-ep.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
new file mode 100644
index 000000000000..9be574ca0a25
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-var-dart-sonata.dts
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Variscite Sonata carrier board for DART-MX95
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+#include "imx95-var-dart.dtsi"
+
+/ {
+ model = "Variscite DART-MX95 on Sonata-Board";
+ compatible = "variscite,var-dart-mx95-sonata",
+ "variscite,var-dart-mx95",
+ "fsl,imx95";
+
+ aliases {
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ serial0 = &lpuart1;
+ ethernet0 = &enetc_port0;
+ ethernet1 = &enetc_port1;
+ ethernet2 = &enetc_port2;
+ };
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ data-role = "dual";
+ label = "USB-C";
+ op-sink-microwatt = <0>;
+ power-role = "dual";
+ self-powered;
+ sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "sink";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ typec_con_hs: endpoint {
+ remote-endpoint = <&usb3_data_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ typec_con_ss: endpoint {
+ remote-endpoint = <&usb3_data_ss>;
+ };
+ };
+ };
+ };
+
+ clk_osc_can0: clock-osc-40m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-heartbeat {
+ label = "Heartbeat";
+ gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-home {
+ label = "Home";
+ linux,code = <KEY_HOME>;
+ gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ button-down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VDD_SD2_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+ off-on-delay-us = <12000>;
+ enable-active-high;
+ };
+
+ reg_phy1_supply: regulator-phy1 {
+ compatible = "regulator-fixed";
+ regulator-name = "SUPPLY_PHY1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <10000>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ sfp0: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&lpi2c3>;
+ los-gpios = <&pca9534 1 GPIO_ACTIVE_HIGH>;
+ maximum-power-milliwatt = <2000>;
+ };
+};
+
+&enetc_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enetc1>;
+ phy-handle = <ðphy1>;
+ /*
+ * The required RGMII TX and RX 2ns delays are implemented directly
+ * in hardware via passive delay elements on the SOM PCB.
+ * No delay configuration is needed in software via PHY driver.
+ */
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&enetc_port2 {
+ phy-mode = "10gbase-r";
+ sfp = <&sfp0>;
+ status = "okay";
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&lpi2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+ pinctrl-2 = <&pinctrl_lpi2c3_gpio>;
+ scl-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ sda-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ /* DS1337 RTC module */
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ /* Capacitive touch controller */
+ ft5x06_ts: touchscreen@38 {
+ compatible = "edt,edt-ft5206";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_captouch>;
+ reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ wakeup-source;
+ };
+
+ pca9534: gpio@22 {
+ compatible = "nxp,pca9534";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+ pcie2-sel-hog {
+ gpio-hog;
+ gpios = <6 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "pcie-clk-sw";
+ };
+
+ sfp-sel-hog {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sfp-sw";
+ };
+ };
+
+ typec@3d {
+ compatible = "nxp,ptn5150";
+ reg = <0x3d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ptn5150>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+ port {
+ typec_dr_sw: endpoint {
+ remote-endpoint = <&usb3_drd_sw>;
+ };
+ };
+ };
+};
+
+&lpi2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c4>;
+ pinctrl-1 = <&pinctrl_lpi2c4>;
+ status = "okay";
+};
+
+&lpi2c8 {
+ pca6408_1: gpio@20 {
+ compatible = "nxp,pcal6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pca6408_2: gpio@21 {
+ compatible = "nxp,pcal6408";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ st33ktpm2xi2c: tpm@2e {
+ compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+ reg = <0x2e>;
+ };
+};
+
+&lpspi7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpspi7>;
+ cs-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ /* Resistive touch controller */
+ ads7846: touchscreen@0 {
+ compatible = "ti,ads7846";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_restouch>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ pendown-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ spi-max-frequency = <1500000>;
+ ti,x-min = /bits/ 16 <125>;
+ ti,x-max = /bits/ 16 <4008>;
+ ti,y-min = /bits/ 16 <282>;
+ ti,y-max = /bits/ 16 <3864>;
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+ ti,debounce-max = /bits/ 16 <10>;
+ ti,debounce-tol = /bits/ 16 <3>;
+ ti,debounce-rep = /bits/ 16 <1>;
+ ti,settle-delay-usec = /bits/ 16 <150>;
+ ti,keep-vref-on;
+ wakeup-source;
+ };
+};
+
+/* Console */
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Header (J12.4, J12.6) */
+&lpuart8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart8>;
+ status = "okay";
+};
+
+&netc_emdio {
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <100000>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ linux,default-trigger = "netdev";
+ };
+ };
+ };
+};
+
+&pcie0 {
+ reset-gpio = <&pca6408_2 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pcie1 {
+ reset-gpio = <&pca6408_2 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&scmi_iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* GPIO Expanders shared IRQ */
+ IMX95_PAD_GPIO_IO37__GPIO5_IO_BIT17 0x31e
+ >;
+ };
+
+ pinctrl_captouch: captouchgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13 0x31e
+ >;
+ };
+
+ pinctrl_enetc1: enetc1grp {
+ fsl,pins = <
+ IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK 0x57e
+ IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL 0x57e
+ IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3 0x57e
+ IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2 0x57e
+ IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1 0x57e
+ IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0 0x57e
+ IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK 0x57e
+ IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL 0x57e
+ IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0 0x57e
+ IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1 0x57e
+ IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2 0x57e
+ IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3 0x37e /* Enable pull-up to strap MXL86110 MDIO address */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX 0x39e
+ IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX 0x39e
+ >;
+ };
+
+ pinctrl_gpio_leds: ledgrp {
+ fsl,pins = <
+ IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28 0x31e
+ IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29 0x31e
+ >;
+ };
+
+ pinctrl_lpi2c4: lpi2c4grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e
+ IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e
+ >;
+ };
+
+ pinctrl_lpspi7: lpspi7grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO04__GPIO2_IO_BIT4 0x3fe /* j16.4 ADS7846 */
+ IMX95_PAD_UART2_TXD__AONMIX_TOP_GPIO1_IO_BIT7 0x3fe /* j14.4 MCP2518FDT */
+ IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4 0x3fe /* j25.2 spidev */
+ IMX95_PAD_GPIO_IO05__LPSPI7_SIN 0x3fe
+ IMX95_PAD_GPIO_IO06__LPSPI7_SOUT 0x3fe
+ IMX95_PAD_GPIO_IO07__LPSPI7_SCK 0x3fe
+ >;
+ };
+
+ pinctrl_ptn5150: ptn5150grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e
+ >;
+ };
+
+ pinctrl_restouch: restouchgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24 0x31e
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12 0x31e
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e
+ IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e
+ >;
+ };
+
+ pinctrl_uart8: uart8grp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO13__LPUART8_RX 0x31e
+ IMX95_PAD_GPIO_IO12__LPUART8_TX 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe
+ IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe
+ IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
+ IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe
+ IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe
+ IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe
+ IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
+ >;
+ };
+};
+
+&usb2 {
+ dr_mode = "host";
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ disable-over-current;
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ status = "okay";
+
+ port {
+ usb3_drd_sw: endpoint {
+ remote-endpoint = <&typec_dr_sw>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb3_data_hs: endpoint {
+ remote-endpoint = <&typec_con_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usb3_data_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+ };
+};
+
+&usb3_phy {
+ fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+ fsl,phy-pcs-tx-swing-full-percent = <100>;
+ fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+ fsl,phy-tx-vboost-level-microvolt = <1156>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default","state_100mhz","state_200mhz","sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ bus-width = <4>;
+ status = "okay";
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 7+ messages in thread