Re: [PATCH v3 4/6] iio: frequency: adf41513: features on frequency change

[Andy Shevchenko <andriy.shevchenko@intel.com>]

On Fri, Jan 16, 2026 at 05:57:43PM +0000, Jonathan Cameron wrote:
> On Mon, 12 Jan 2026 12:54:50 +0200
> Andy Shevchenko <andriy.shevchenko@intel.com> wrote:
> > On Mon, Jan 12, 2026 at 09:45:49AM +0000, Rodrigo Alencar wrote:
> > > On 26/01/09 09:07PM, Andy Shevchenko wrote:  
> > > > On Thu, Jan 08, 2026 at 12:14:53PM +0000, Rodrigo Alencar via B4 Relay wrote:  

...

> > > > > +	bleed_value = div64_u64(st->settings.pfd_frequency_uhz * bleed_value,
> > > > > +				1600ULL * HZ_PER_MHZ * MICROHZ_PER_HZ);  
> > 
> > You multiply Hz * Hz. One of them should be simply SI multiplier.
> > To me it sounds like one of
> > 
> > 				1600ULL * MEGA * MICROHZ_PER_HZ);
> > 				1600ULL * HZ_PER_MHZ * MICRO);
> > 
> > will be the correct one (and I lean towards the first one as you want units
> > to match).
> 
> I don't really care, but... They are Hz * Hz / Hz * Hz / Hz = HZ
> if we assume the first number is in Hz.  The others are all ratios.
>  
> So original is fine as far as I can tell.

I don't see it like this. I consider that we should have only one meaningful
units as the rest is just a value. What you wrote above has a little sense
to me, sorry.

-- 
With Best Regards,
Andy Shevchenko