Re: [PATCH v2] dt-bindings: memory: lpddr2: Adjust revision ID property to match lpddr3

[Dmitry Osipenko <digetx@gmail.com>]

19.02.2022 04:24, Julius Werner пишет:
> Commit 3539a2 (dt-bindings: memory: lpddr2: Add revision-id properties)
> added the properties `revision-id1` and `revision-id2` to the
> "jedec,lpddr2" binding. The "jedec,lpddr3" binding already had a single
> array property `revision-id` for the same purpose. For consistency
> between related memory types, this patch deprecates the LPDDR2
> properties and instead adds a property in the same style as for LPDDR3
> to that binding.
> 
> Signed-off-by: Julius Werner <jwerner@chromium.org>
> ---

Every revised version of the patch must contain changelog.

>  .../memory-controllers/ddr/jedec,lpddr2.yaml       | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
> index 25ed0266f6dd3d..37229738f47271 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
> @@ -30,12 +30,23 @@ properties:
>      maximum: 255
>      description: |
>        Revision 1 value of SDRAM chip. Obtained from device datasheet.
> +      Property is deprecated, use revision-id instead.
> +    deprecated: true
>  
>    revision-id2:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      maximum: 255
>      description: |
>        Revision 2 value of SDRAM chip. Obtained from device datasheet.
> +      Property is deprecated, use revision-id instead.
> +    deprecated: true
> +
> +  revision-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 2
> +    maxItems: 2
> +    description: |
> +      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
>  
>    density:
>      $ref: /schemas/types.yaml#/definitions/uint32
> @@ -164,8 +175,7 @@ examples:
>          compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
>          density = <2048>;
>          io-width = <32>;
> -        revision-id1 = <1>;
> -        revision-id2 = <0>;
> +        revision-id = <123 234>;
>  
>          tRPab-min-tck = <3>;
>          tRCD-min-tck = <3>;

It's not enough to change only the binding. You should also update the
device-trees and drivers/memory.