[PATCH V3 1/3] dt-bindings: vendor-prefixes: add acelink

[PATCH V3 1/3] dt-bindings: vendor-prefixes: add acelink

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Acelink is a Taiwan company providing network products (routers, access
points, switches, cameras and more).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 309b94c328c8..503a3caf6fc9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -39,6 +39,8 @@ patternProperties:
     description: ShenZhen Asia Better Technology Ltd.
   "^acbel,.*":
     description: Acbel Polytech Inc.
+  "^acelink,.*":
+    description: Acelink Technology Co., Ltd.
   "^acer,.*":
     description: Acer Inc.
   "^acme,.*":
-- 
2.35.3

[PATCH V3 2/3] dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index a5999b3afc35..cfdd3317edda 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -84,6 +84,7 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - acelink,ew-7886cax
               - bananapi,bpi-r3
               - mediatek,mt7986a-rfb
           - const: mediatek,mt7986a
-- 
2.35.3

[PATCH V3 3/3] arm64: dts: mediatek: Add Acelink EW-7886CAX

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Acelink EW-7886CAX is an MT7986A (AKA Filogic 830) based access point.
It has 512 MiB of RAM, one 2.5 Gbps PoE (802.3at) Ethernet port and
on-SoC Wi-Fi.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
V2: Update coding style to follow:
    [PATCH v4] docs: dt-bindings: add DTS Coding Style document
V3: Add missing semicolon (I forgot to amend my local V2 change, sorry!)
    Drop unused "partitions" label

 arch/arm64/boot/dts/mediatek/Makefile         |   1 +
 .../mediatek/mt7986a-acelink-ew-7886cax.dts   | 173 ++++++++++++++++++
 2 files changed, 174 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..9ff2ab6c5e4d 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
new file mode 100644
index 000000000000..08b3b0827436
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	compatible = "acelink,ew-7886cax", "mediatek,mt7986a";
+	model = "Acelink EW-7886CAX";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		reg = <0 0x40000000 0 0x20000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+		nvmem-cells = <&macaddr>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	mdio-bus {
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <50000>;
+		reset-post-delay-us = <20000>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy6: phy@6 {
+			compatible = "ethernet-phy-ieee802.3-c45";
+			reg = <6>;
+		};
+	};
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <52000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x100000>;
+				label = "bootloader";
+				read-only;
+			};
+
+			partition@100000 {
+				reg = <0x100000 0x80000>;
+				label = "u-boot-env";
+			};
+
+			partition@180000 {
+				compatible = "nvmem-cells";
+				reg = <0x180000 0x200000>;
+				label = "factory";
+				read-only;
+
+				nvmem-layout {
+					compatible = "fixed-layout";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					eeprom: eeprom@0 {
+						reg = <0x0 0x1000>;
+					};
+
+					macaddr: macaddr@4 {
+						reg = <0x4 0x6>;
+					};
+				};
+			};
+
+			partition@380000 {
+				reg = <0x380000 0x200000>;
+				label = "fip";
+			};
+
+			partition@580000 {
+				reg = <0x580000 0x4000000>;
+				label = "ubi";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	nvmem-cells = <&eeprom>;
+	nvmem-cell-names = "eeprom";
+	status = "okay";
+};
-- 
2.35.3

Re: [PATCH V3 1/3] dt-bindings: vendor-prefixes: add acelink

[Rafał Miłecki]

Hi,

On 7.12.2023 09:05, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Acelink is a Taiwan company providing network products (routers, access
> points, switches, cameras and more).
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

AngeloGioacchino, Matthias: I'd like just to make sure you didn't miss
those patches. Other patches are already present in mediatek/linux.git
but this patchset didn't make it there.

P.S.
Other two pending patches are:
[PATCH 1/2] arm64: dts: mediatek: mt7986: reorder properties
[PATCH 2/2] arm64: dts: mediatek: mt7986: reorder nodes


> ---
>   Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 309b94c328c8..503a3caf6fc9 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -39,6 +39,8 @@ patternProperties:
>       description: ShenZhen Asia Better Technology Ltd.
>     "^acbel,.*":
>       description: Acbel Polytech Inc.
> +  "^acelink,.*":
> +    description: Acelink Technology Co., Ltd.
>     "^acer,.*":
>       description: Acer Inc.
>     "^acme,.*":

Re: [PATCH V3 1/3] dt-bindings: vendor-prefixes: add acelink

[Rafał Miłecki]

On 7.12.2023 09:05, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Acelink is a Taiwan company providing network products (routers, access
> points, switches, cameras and more).
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

It's 2 months now that I'm waiting for this patchset to be applied.

Can you handle it now, please?


While at it please also look at two more pending patches:
[PATCH 1/2] arm64: dts: mediatek: mt7986: reorder properties
[PATCH 2/2] arm64: dts: mediatek: mt7986: reorder nodes