Re: [PATCH 3/3] arm64: dts: qcom: milos: Add Iris VPU v2.0

[Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>]

On 4/6/2026 3:49 PM, Alexander Koskovich wrote:
> Add devicetree nodes for the Iris codec (VPU 2.0) found on the Milos
> platform.
> 
> Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
> ---
>  arch/arm64/boot/dts/qcom/milos.dtsi | 85 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
> index e1a51d43943f..07aa398c9695 100644
> --- a/arch/arm64/boot/dts/qcom/milos.dtsi
> +++ b/arch/arm64/boot/dts/qcom/milos.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/clock/qcom,milos-dispcc.h>
>  #include <dt-bindings/clock/qcom,milos-gcc.h>
>  #include <dt-bindings/clock/qcom,milos-gpucc.h>
> +#include <dt-bindings/clock/qcom,milos-videocc.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sm8650-tcsr.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
> @@ -1517,6 +1518,90 @@ usb_1_dwc3_hs: endpoint {
>  			};
>  		};
>  
> +		iris: video-codec@aa00000 {
> +			compatible = "qcom,milos-iris";
> +			reg = <0 0x0aa00000 0 0xf0000>;
> +
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> +			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
> +					<&videocc VIDEO_CC_MVS0_GDSC>,
> +					<&rpmhpd RPMHPD_CX>,
> +					<&rpmhpd RPMHPD_MX>;
> +			power-domain-names = "venus",
> +					     "vcodec0",
> +					     "cx",
> +					     "mx";
> +
> +			operating-points-v2 = <&iris_opp_table>;
> +
> +			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> +				 <&videocc VIDEO_CC_MVS0C_CLK>,
> +				 <&videocc VIDEO_CC_MVS0_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "vcodec0_core";
> +
> +			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> +					 &cnoc_cfg SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> +					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "cpu-cfg",
> +					     "video-mem";
> +
> +			memory-region = <&video_mem>;
> +
> +			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
> +				 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
> +			reset-names = "bus",
> +				      "core";
> +
> +			iommus = <&apps_smmu 0x1960 0>,
> +				 <&apps_smmu 0x1967 0>;
> +
> +			dma-coherent;
> +
> +			/*
> +			 * IRIS firmware is signed by vendors, only enable on
> +			 * boards where the proper signed firmware is available.
> +			 */
> +			status = "disabled";
> +
> +			iris_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-240000000 {
> +					opp-hz = /bits/ 64 <240000000>;
> +					required-opps = <&rpmhpd_opp_low_svs>,
> +							<&rpmhpd_opp_low_svs>;

s/rpmhpd_opp_low_svs/rpmhpd_opp_svs

> +				};
> +
> +				opp-338000000 {
> +					opp-hz = /bits/ 64 <338000000>;
> +					required-opps = <&rpmhpd_opp_svs>,
> +							<&rpmhpd_opp_svs>;
> +				};
> +
> +				opp-366000000 {
> +					opp-hz = /bits/ 64 <366000000>;
> +					required-opps = <&rpmhpd_opp_svs_l1>,
> +							<&rpmhpd_opp_svs_l1>;

s/rpmhpd_opp_svs_l1/rpmhpd_opp_svs

> +				};
> +
> +				opp-444000000 {
> +					opp-hz = /bits/ 64 <444000000>;
> +					required-opps = <&rpmhpd_opp_nom>,
> +		

					<&rpmhpd_opp_nom>;
s/rpmhpd_opp_nom/rpmhpd_opp_svs_l1

> +				};
> +
> +				opp-552000000 {
> +					opp-hz = /bits/ 64 <552000000>;
> +					required-opps = <&rpmhpd_opp_turbo>,
> +							<&rpmhpd_opp_turbo>;

s/rpmhpd_opp_turbo/rpmhpd_opp_nom

Thanks,
Dikshita
> +				};

> +			};
> +		};
> +
>  		videocc: clock-controller@aaf0000 {
>  			compatible = "qcom,milos-videocc";
>  			reg = <0x0 0x0aaf0000 0x0 0x10000>;
>