Re: [PATCH v2 1/3] dt-bindings: mfd: atmel,flexcom: Convert to json-schema

[<Claudiu.Beznea@microchip.com>]

On 07.06.2022 17:47, Kavyasree Kotagiri wrote:
> Convert the Atmel flexcom device tree bindings to json schema.
> 
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> ---
> v1 -> v2:
>  - Fix title.
> 
>  .../bindings/mfd/atmel,flexcom.yaml           | 97 +++++++++++++++++++
>  .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 ------------
>  2 files changed, 97 insertions(+), 63 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> new file mode 100644
> index 000000000000..05cb6ebb4b2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel,flexcom.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/atmel,flexcom.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel Flexcom (Flexible Serial Communication Unit)
> +
> +maintainers:
> +  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
> +
> +description:
> +  The Atmel Flexcom is just a wrapper which embeds a SPI controller,
> +  an I2C controller and an USART. Only one function can be used at a
> +  time and is chosen at boot time according to the device tree.
> +
> +properties:
> +  compatible:
> +    const: atmel,sama5d2-flexcom
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  ranges:
> +    description:
> +      One range for the full I/O register region. (including USART,
> +      TWI and SPI registers).
> +    items:
> +      maxItems: 3
> +
> +  atmel,flexcom-mode:
> +    description: |
> +      Specifies the flexcom mode as follows:
> +      1: USART
> +      2: SPI
> +      3: I2C.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [1, 2, 3]
> +
> +patternProperties:
> +  "^serial@[0-9a-f]+$":
> +    description: See atmel-usart.txt for details of USART bindings.
> +    type: object
> +
> +  "^spi@[0-9a-f]+$":
> +    description: See ../spi/spi_atmel.txt for details of SPI bindings.
> +    type: object
> +
> +  "^i2c@[0-9a-f]+$":
> +    description: See ../i2c/i2c-at91.txt for details of I2C bindings.
> +    type: object
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +  - atmel,flexcom-mode
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    flx0: flexcom@f8034000 {
> +          compatible = "atmel,sama5d2-flexcom";
> +          reg = <0xf8034000 0x200>;
> +          clocks = <&flx0_clk>;
> +          #address-cells = <1>;
> +          #size-cells = <1>;
> +          ranges = <0x0 0xf8034000 0x800>;
> +          atmel,flexcom-mode = <2>;
> +
> +          spi0: spi@400 {
> +                compatible = "atmel,at91rm9200-spi";
> +                reg = <0x400 0x200>;
> +                interrupts = <19 4 7>;

You can still use IRQ_TYPE_LEVEL_HIGH instead of 4 as it was in previous
atmel-flexcom.txt.

> +                pinctrl-names = "default";
> +                pinctrl-0 = <&pinctrl_flx0_default>;
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                clocks = <&flx0_clk>;
> +                clock-names = "spi_clk";
> +                atmel,fifo-size = <32>;
> +          };
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> deleted file mode 100644
> index 9d837535637b..000000000000
> --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
> -
> -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
> -controller and an USART. Only one function can be used at a time and is chosen
> -at boot time according to the device tree.
> -
> -Required properties:
> -- compatible:		Should be "atmel,sama5d2-flexcom"
> -- reg:			Should be the offset/length value for Flexcom dedicated
> -			I/O registers (without USART, TWI or SPI registers).
> -- clocks:		Should be the Flexcom peripheral clock from PMC.
> -- #address-cells:	Should be <1>
> -- #size-cells:		Should be <1>
> -- ranges:		Should be one range for the full I/O register region
> -			(including USART, TWI and SPI registers).
> -- atmel,flexcom-mode:	Should be one of the following values:
> -			- <1> for USART
> -			- <2> for SPI
> -			- <3> for I2C
> -
> -Required child:
> -A single available child device of type matching the "atmel,flexcom-mode"
> -property.
> -
> -The phandle provided by the clocks property of the child is the same as one for
> -the Flexcom parent.
> -
> -For other properties, please refer to the documentations of the respective
> -device:
> -- ../serial/atmel-usart.txt
> -- ../spi/spi_atmel.txt
> -- ../i2c/i2c-at91.txt
> -
> -Example:
> -
> -flexcom@f8034000 {
> -	compatible = "atmel,sama5d2-flexcom";
> -	reg = <0xf8034000 0x200>;
> -	clocks = <&flx0_clk>;
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	ranges = <0x0 0xf8034000 0x800>;
> -	atmel,flexcom-mode = <2>;
> -
> -	spi@400 {
> -		compatible = "atmel,at91rm9200-spi";
> -		reg = <0x400 0x200>;
> -		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_flx0_default>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		clocks = <&flx0_clk>;
> -		clock-names = "spi_clk";
> -		atmel,fifo-size = <32>;
> -
> -		flash@0 {
> -			compatible = "atmel,at25f512b";
> -			reg = <0>;
> -			spi-max-frequency = <20000000>;
> -		};
> -	};
> -};