Re: [PATCH v2 2/4] arm64: dts: ti: k3: squelch warnings regarding no #address-cells for interrupt-controller

[Grygorii Strashko <grygorii.strashko@ti.com>]

Hi Rob,

On 17/11/2020 18:19, Sekhar Nori wrote:
> With dtc 1.6.0, building TI device-tree files with W=2 results in warnings
> like below for all interrupt controllers.
> 
> /bus@100000/bus@30000000/interrupt-controller1: Missing #address-cells in interrupt provider
> 
> Fix these by adding #address-cells = <0>; for all interrupt controllers in
> TI device-tree files. Any other #address-cells value is really only needed
> if interrupt-map property is being used (which is not the case for existing
> TI device-tree files)
> 
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am65-main.dtsi              |  5 +++++
>   arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi            |  2 ++
>   arch/arm64/boot/dts/ti/k3-am654-base-board.dts        |  1 +
>   arch/arm64/boot/dts/ti/k3-j7200-main.dtsi             |  3 +++
>   arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi       |  1 +
>   arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts |  1 +
>   arch/arm64/boot/dts/ti/k3-j721e-main.dtsi             | 11 +++++++++++
>   arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi       |  3 +++
>   8 files changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index aa8725db0187..55aaa1404d7d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -440,6 +440,7 @@
>   		interrupt-controller;
>   		interrupt-parent = <&gic500>;
>   		#interrupt-cells = <1>;
> +		#address-cells = <0>;
Does it really required or mandatory to have #address-cells = <0>; defined for interrupt-controller DT nodes which
do not have child nodes and no "interrupt-map"?

-- 
Best regards,
grygorii