On Sun, Mar 15, 2026 at 12:12:13PM +0000, Conor Dooley wrote: > On Sat, Mar 14, 2026 at 09:56:27AM -0700, Drew Fustini wrote: > > On Tue, Mar 10, 2026 at 12:24:56AM +0800, Icenowy Zheng wrote: > > > The G and J coefficients provided by T-Head TH1520 manual (which calls > > > them A and C coefficients and calls H coefficient in the binding as B) > > > have 1/100 degree Celsius precision (the values are 42.74 and -0.16 > > > respectively), however the binding currently only allows coefficients as > > > precise as 100 milli-Celsius (1/10 degree Celsius). > > > > > > Change the multipleOf value of these two coefficients to 10 (in the unit > > > of milli-Celsius) to satisfy the need of TH1520. > > > > > > Signed-off-by: Icenowy Zheng > > > Reviewed-by: Drew Fustini > > > --- > > > Changes in v3: > > > - Added Drew's R-b. > > > - Fixed some typos in the commit message and slightly reworded the > > > precision sentence. > > > > > > Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 4 ++-- > > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > index 56db2292f062d..7d57c2934a8a1 100644 > > > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml > > > @@ -105,7 +105,7 @@ properties: > > > G coefficient for temperature equation. > > > Default for series 5 = 60000 > > > Default for series 6 = 57400 > > > - multipleOf: 100 > > > + multipleOf: 10 > > > minimum: 1000 > > > $ref: /schemas/types.yaml#/definitions/uint32 > > > > > > @@ -131,7 +131,7 @@ properties: > > > J coefficient for temperature equation. > > > Default for series 5 = -100 > > > Default for series 6 = 0 > > > - multipleOf: 100 > > > + multipleOf: 10 > > > maximum: 0 > > > $ref: /schemas/types.yaml#/definitions/int32 > > > > > > -- > > > 2.52.0 > > > > > > > I have applied this to thead-dt-for-next. > > That's odd, why is a hwmon binding in your branch? > > > https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux.git/commit/?h=thead-dt-for-next&id=eb4fd43ff6793681f0a0a8e8ac861142caba2b19 > > I don't see an ack on it from the relevant maintainer either? Sorry, my mistake, I should not have applied the binding. And you are right to point out that there was no ack from Guenter or Rahul Tanwar. I will drop both patches from thead-dt-for-next and wait for agreement on the binding. Thanks, Drew