Re: [PATCH v3 1/3] dt-bindings: connector: usb: add altmodes description

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 20/11/2023 23:00, Dmitry Baryshkov wrote:
> Add description of the USB-C AltModes supported on the particular USB-C
> connector. This is required for devices like Qualcomm Robotics RB5,
> which have no other way to express alternative modes supported by the
> hardware platform.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../bindings/connector/usb-connector.yaml     | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> index 7c8a3e8430d3..c1aaac861d9d 100644
> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> @@ -171,6 +171,28 @@ properties:
>        offer the power, Capability Mismatch is set. Required for power sink and
>        power dual role.
>  
> +  altmodes:
> +    type: object
> +    description: List of Alternative Modes supported by the schematics on the
> +      particular device. This is only necessary if there are no other means to
> +      discover supported alternative modes (e.g. through the UCSI firmware
> +      interface).
> +
> +    patternProperties:
> +      "^(displayport)$":

This is just a property, so should be under "properties:".

The rest looks good to me, but I don't know USB that much to judge.

Best regards,
Krzysztof