* [PATCH 0/2] Add PM8010 regulators for sm8650 boards.
@ 2024-01-23 6:42 Fenglin Wu via B4 Relay
2024-01-23 6:42 ` [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators Fenglin Wu via B4 Relay
2024-01-23 6:42 ` [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: " Fenglin Wu via B4 Relay
0 siblings, 2 replies; 5+ messages in thread
From: Fenglin Wu via B4 Relay @ 2024-01-23 6:42 UTC (permalink / raw)
To: kernel, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, quic_collinsd,
Fenglin Wu
Add PM8010 RPMh regulators for sm8650-mtp and sm8650-qrd boards.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
Fenglin Wu (2):
arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 118 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 118 ++++++++++++++++++++++++++++++++
2 files changed, 236 insertions(+)
---
base-commit: 6613476e225e090cc9aad49be7fa504e290dd33d
change-id: 20240123-sm8650_pm8010_support-750c05a5cd5d
Best regards,
--
Fenglin Wu <quic_fenglinw@quicinc.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
2024-01-23 6:42 [PATCH 0/2] Add PM8010 regulators for sm8650 boards Fenglin Wu via B4 Relay
@ 2024-01-23 6:42 ` Fenglin Wu via B4 Relay
2024-01-23 8:26 ` neil.armstrong
2024-01-23 6:42 ` [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: " Fenglin Wu via B4 Relay
1 sibling, 1 reply; 5+ messages in thread
From: Fenglin Wu via B4 Relay @ 2024-01-23 6:42 UTC (permalink / raw)
To: kernel, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, quic_collinsd,
Fenglin Wu
From: Fenglin Wu <quic_fenglinw@quicinc.com>
Add PM8010 regulator device nodes for sm8650-mtp board.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 118 ++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 9d916edb1c73..3791971efee6 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -428,6 +428,124 @@ vreg_l3i_1p2: ldo3 {
RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6c_1p8>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p1: ldo1 {
+ regulator-name = "vreg_l1m_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_2p8: ldo6 {
+ regulator-name = "vreg_l6m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p96: ldo7 {
+ regulator-name = "vreg_l7m_2p96";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+ vdd-l5-l6-supply = <&vreg_bob2>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p056: ldo2 {
+ regulator-name = "vreg_l2n_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_1p8: ldo3 {
+ regulator-name = "vreg_l3n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_1p8: ldo4 {
+ regulator-name = "vreg_l4n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_2p8: ldo5 {
+ regulator-name = "vreg_l5n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_2p8: ldo6 {
+ regulator-name = "vreg_l6n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_3p3: ldo7 {
+ regulator-name = "vreg_l7n_3p3";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&dispcc {
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
2024-01-23 6:42 [PATCH 0/2] Add PM8010 regulators for sm8650 boards Fenglin Wu via B4 Relay
2024-01-23 6:42 ` [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators Fenglin Wu via B4 Relay
@ 2024-01-23 6:42 ` Fenglin Wu via B4 Relay
2024-01-23 8:26 ` neil.armstrong
1 sibling, 1 reply; 5+ messages in thread
From: Fenglin Wu via B4 Relay @ 2024-01-23 6:42 UTC (permalink / raw)
To: kernel, Bjorn Andersson, Konrad Dybcio, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, quic_collinsd,
Fenglin Wu
From: Fenglin Wu <quic_fenglinw@quicinc.com>
Add PM8010 regulator device nodes for sm8650-qrd board.
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 118 ++++++++++++++++++++++++++++++++
1 file changed, 118 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 592a67a47c78..361894fa201a 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -436,6 +436,124 @@ vreg_l3i_1p2: ldo3 {
RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ regulators-6 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "m";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_bob2>;
+ vdd-l5-supply = <&vreg_s6c_1p8>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+
+ vreg_l1m_1p1: ldo1 {
+ regulator-name = "vreg_l1m_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2m_1p056: ldo2 {
+ regulator-name = "vreg_l2m_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3m_2p8: ldo3 {
+ regulator-name = "vreg_l3m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4m_2p8: ldo4 {
+ regulator-name = "vreg_l4m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5m_1p8: ldo5 {
+ regulator-name = "vreg_l5m_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6m_2p8: ldo6 {
+ regulator-name = "vreg_l6m_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7m_2p96: ldo7 {
+ regulator-name = "vreg_l7m_2p96";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-7 {
+ compatible = "qcom,pm8010-rpmh-regulators";
+ qcom,pmic-id = "n";
+
+ vdd-l1-l2-supply = <&vreg_s1c_1p2>;
+ vdd-l3-l4-supply = <&vreg_s6c_1p8>;
+ vdd-l5-l6-supply = <&vreg_bob2>;
+ vdd-l7-supply = <&vreg_bob1>;
+
+ vreg_l1n_1p1: ldo1 {
+ regulator-name = "vreg_l1n_1p1";
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2n_1p056: ldo2 {
+ regulator-name = "vreg_l2n_1p056";
+ regulator-min-microvolt = <1056000>;
+ regulator-max-microvolt = <1056000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3n_1p8: ldo3 {
+ regulator-name = "vreg_l3n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4n_1p8: ldo4 {
+ regulator-name = "vreg_l4n_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5n_2p8: ldo5 {
+ regulator-name = "vreg_l5n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6n_2p8: ldo6 {
+ regulator-name = "vreg_l6n_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7n_3p3: ldo7 {
+ regulator-name = "vreg_l7n_3p3";
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
};
&dispcc {
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: add PM8010 regulators
2024-01-23 6:42 ` [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: " Fenglin Wu via B4 Relay
@ 2024-01-23 8:26 ` neil.armstrong
0 siblings, 0 replies; 5+ messages in thread
From: neil.armstrong @ 2024-01-23 8:26 UTC (permalink / raw)
To: quic_fenglinw, kernel, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, quic_collinsd
On 23/01/2024 07:42, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <quic_fenglinw@quicinc.com>
>
> Add PM8010 regulator device nodes for sm8650-qrd board.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 118 ++++++++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> index 592a67a47c78..361894fa201a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
> @@ -436,6 +436,124 @@ vreg_l3i_1p2: ldo3 {
> RPMH_REGULATOR_MODE_HPM>;
> };
> };
> +
> + regulators-6 {
> + compatible = "qcom,pm8010-rpmh-regulators";
> + qcom,pmic-id = "m";
> +
> + vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> + vdd-l3-l4-supply = <&vreg_bob2>;
> + vdd-l5-supply = <&vreg_s6c_1p8>;
> + vdd-l6-l7-supply = <&vreg_bob1>;
> +
> + vreg_l1m_1p1: ldo1 {
> + regulator-name = "vreg_l1m_1p1";
> + regulator-min-microvolt = <1104000>;
> + regulator-max-microvolt = <1104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2m_1p056: ldo2 {
> + regulator-name = "vreg_l2m_1p056";
> + regulator-min-microvolt = <1056000>;
> + regulator-max-microvolt = <1056000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3m_2p8: ldo3 {
> + regulator-name = "vreg_l3m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4m_2p8: ldo4 {
> + regulator-name = "vreg_l4m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5m_1p8: ldo5 {
> + regulator-name = "vreg_l5m_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6m_2p8: ldo6 {
> + regulator-name = "vreg_l6m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7m_2p96: ldo7 {
> + regulator-name = "vreg_l7m_2p96";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-7 {
> + compatible = "qcom,pm8010-rpmh-regulators";
> + qcom,pmic-id = "n";
> +
> + vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> + vdd-l3-l4-supply = <&vreg_s6c_1p8>;
> + vdd-l5-l6-supply = <&vreg_bob2>;
> + vdd-l7-supply = <&vreg_bob1>;
> +
> + vreg_l1n_1p1: ldo1 {
> + regulator-name = "vreg_l1n_1p1";
> + regulator-min-microvolt = <1104000>;
> + regulator-max-microvolt = <1104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2n_1p056: ldo2 {
> + regulator-name = "vreg_l2n_1p056";
> + regulator-min-microvolt = <1056000>;
> + regulator-max-microvolt = <1056000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3n_1p8: ldo3 {
> + regulator-name = "vreg_l3n_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4n_1p8: ldo4 {
> + regulator-name = "vreg_l4n_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5n_2p8: ldo5 {
> + regulator-name = "vreg_l5n_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6n_2p8: ldo6 {
> + regulator-name = "vreg_l6n_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7n_3p3: ldo7 {
> + regulator-name = "vreg_l7n_3p3";
> + regulator-min-microvolt = <3304000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> };
>
> &dispcc {
>
[ 2.847268] vreg_l2m_1p056: Setting 1056000-1056000uV
[ 2.852186] vreg_l2n_1p056: Setting 1056000-1056000uV
[ 2.858879] vreg_l3m_2p8: Setting 2800000-2800000uV
[ 2.863483] vreg_l3n_1p8: Setting 1800000-1800000uV
[ 2.866798] vreg_l4m_2p8: Setting 2800000-2800000uV
[ 2.870018] vreg_l4n_1p8: Setting 1800000-1800000uV
[ 2.876182] vreg_l5m_1p8: Setting 1800000-1800000uV
[ 2.881297] vreg_l5n_2p8: Setting 2800000-2800000uV
[ 2.886532] vreg_l6m_2p8: Setting 2800000-2800000uV
[ 2.891332] vreg_l6n_2p8: Setting 2800000-2800000uV
[ 2.896519] vreg_l7m_2p96: Setting 2960000-2960000uV
[ 2.900919] vreg_l7n_3p3: Setting 3304000-3304000uV
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators
2024-01-23 6:42 ` [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators Fenglin Wu via B4 Relay
@ 2024-01-23 8:26 ` neil.armstrong
0 siblings, 0 replies; 5+ messages in thread
From: neil.armstrong @ 2024-01-23 8:26 UTC (permalink / raw)
To: quic_fenglinw, kernel, Bjorn Andersson, Konrad Dybcio,
Rob Herring, Krzysztof Kozlowski, Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, quic_collinsd
On 23/01/2024 07:42, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <quic_fenglinw@quicinc.com>
>
> Add PM8010 regulator device nodes for sm8650-mtp board.
>
> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
> ---
> arch/arm64/boot/dts/qcom/sm8650-mtp.dts | 118 ++++++++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> index 9d916edb1c73..3791971efee6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
> @@ -428,6 +428,124 @@ vreg_l3i_1p2: ldo3 {
> RPMH_REGULATOR_MODE_HPM>;
> };
> };
> +
> + regulators-6 {
> + compatible = "qcom,pm8010-rpmh-regulators";
> + qcom,pmic-id = "m";
> +
> + vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> + vdd-l3-l4-supply = <&vreg_bob2>;
> + vdd-l5-supply = <&vreg_s6c_1p8>;
> + vdd-l6-l7-supply = <&vreg_bob1>;
> +
> + vreg_l1m_1p1: ldo1 {
> + regulator-name = "vreg_l1m_1p1";
> + regulator-min-microvolt = <1104000>;
> + regulator-max-microvolt = <1104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2m_1p056: ldo2 {
> + regulator-name = "vreg_l2m_1p056";
> + regulator-min-microvolt = <1056000>;
> + regulator-max-microvolt = <1056000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3m_2p8: ldo3 {
> + regulator-name = "vreg_l3m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4m_2p8: ldo4 {
> + regulator-name = "vreg_l4m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5m_1p8: ldo5 {
> + regulator-name = "vreg_l5m_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6m_2p8: ldo6 {
> + regulator-name = "vreg_l6m_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7m_2p96: ldo7 {
> + regulator-name = "vreg_l7m_2p96";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-7 {
> + compatible = "qcom,pm8010-rpmh-regulators";
> + qcom,pmic-id = "n";
> +
> + vdd-l1-l2-supply = <&vreg_s1c_1p2>;
> + vdd-l3-l4-supply = <&vreg_s6c_1p8>;
> + vdd-l5-l6-supply = <&vreg_bob2>;
> + vdd-l7-supply = <&vreg_bob1>;
> +
> + vreg_l1n_1p1: ldo1 {
> + regulator-name = "vreg_l1n_1p1";
> + regulator-min-microvolt = <1104000>;
> + regulator-max-microvolt = <1104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2n_1p056: ldo2 {
> + regulator-name = "vreg_l2n_1p056";
> + regulator-min-microvolt = <1056000>;
> + regulator-max-microvolt = <1056000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3n_1p8: ldo3 {
> + regulator-name = "vreg_l3n_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4n_1p8: ldo4 {
> + regulator-name = "vreg_l4n_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5n_2p8: ldo5 {
> + regulator-name = "vreg_l5n_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6n_2p8: ldo6 {
> + regulator-name = "vreg_l6n_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7n_3p3: ldo7 {
> + regulator-name = "vreg_l7n_3p3";
> + regulator-min-microvolt = <3304000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> };
>
> &dispcc {
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-01-23 8:27 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-23 6:42 [PATCH 0/2] Add PM8010 regulators for sm8650 boards Fenglin Wu via B4 Relay
2024-01-23 6:42 ` [PATCH 1/2] arm64: dts: qcom: sm8650-mtp: add PM8010 regulators Fenglin Wu via B4 Relay
2024-01-23 8:26 ` neil.armstrong
2024-01-23 6:42 ` [PATCH 2/2] arm64: dts: qcom: sm8650-qrd: " Fenglin Wu via B4 Relay
2024-01-23 8:26 ` neil.armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).