From mboxrd@z Thu Jan  1 00:00:00 1970
From: Dan Murphy <dmurphy@ti.com>
Subject: Re: [PATCH 03/25] dt-bindings: leds: Add LED_FUNCTION definitions
Date: Mon, 11 Mar 2019 07:22:17 -0500
Message-ID: <ac860282-af12-8a1f-5d85-2f587856d669@ti.com>
References: <20190310182836.20841-1-jacek.anaszewski@gmail.com>
 <20190310182836.20841-4-jacek.anaszewski@gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <20190310182836.20841-4-jacek.anaszewski@gmail.com>
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
To: Jacek Anaszewski <jacek.anaszewski@gmail.com>, linux-leds@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, pavel@ucw.cz, robh@kernel.org, Baolin Wang <baolin.wang@linaro.org>, Daniel Mack <daniel@zonque.org>, Linus Walleij <linus.walleij@linaro.org>, Oleh Kravchenko <oleg@kaa.org.ua>, Sakari Ailus <sakari.ailus@linux.intel.com>, Simon Shields <simon@lineageos.org>
List-Id: devicetree@vger.kernel.org

Jacek

On 3/10/19 1:28 PM, Jacek Anaszewski wrote:
> Add common LED function definitions for use in Device Tree.
> The function names were extracted from existing dts files
> after eliminating oddities.
> 
> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Dan Murphy <dmurphy@ti.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Oleh Kravchenko <oleg@kaa.org.ua>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Simon Shields <simon@lineageos.org>
> ---
>  include/dt-bindings/leds/common.h | 38 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
> index e171d0a6beb2..ffcd46317307 100644
> --- a/include/dt-bindings/leds/common.h
> +++ b/include/dt-bindings/leds/common.h
> @@ -19,4 +19,42 @@
>  #define LEDS_BOOST_ADAPTIVE	1
>  #define LEDS_BOOST_FIXED	2
>  
> +/* Standard LED functions */
> +#define LED_FUNCTION_ACTIVITY "activity"
> +#define LED_FUNCTION_ADSL "adsl"
> +#define LED_FUNCTION_ALARM "alarm"
> +#define LED_FUNCTION_BACKLIGHT "backlight"
> +#define LED_FUNCTION_BLUETOOTH "bluetooth"
> +#define LED_FUNCTION_BOOT "boot"
> +#define LED_FUNCTION_CHRG "chrg"

Why not spell out charge?


> +#define LED_FUNCTION_DEBUG "debug"
> +#define LED_FUNCTION_DISK "disk"
> +#define LED_FUNCTION_DISK_READ "disk-read"
> +#define LED_FUNCTION_DISK_WRITE "disk-write"
> +#define LED_FUNCTION_FAULT "fault"
> +#define LED_FUNCTION_FLASH "flash"
> +#define LED_FUNCTION_HDDERR "hdderr"
> +#define LED_FUNCTION_HEARTBEAT "heartbeat"
> +#define LED_FUNCTION_INDICATOR "indicator"
> +#define LED_FUNCTION_INFO "info"
> +#define LED_FUNCTION_INTERNET "internet"

LEDs function can be for keyboards and keypads.

Keypad for hand held devices

#define LED_FUNCTION_KEYBOARD "keyboard"
#define LED_FUNCTION_KEYPAD "keypad"


> +#define LED_FUNCTION_LAN "lan"
> +#define LED_FUNCTION_MMC "mmc"
> +#define LED_FUNCTION_NAND "nand"
> +#define LED_FUNCTION_ON "on"
> +#define LED_FUNCTION_PROGRAMMING "programming"
> +#define LED_FUNCTION_PWR "pwr"

Same comment as above on chrg

> +#define LED_FUNCTION_RX "rx"
> +#define LED_FUNCTION_SD "sd"
> +#define LED_FUNCTION_SLEEP "sleep"
> +#define LED_FUNCTION_STANDBY "standby"
> +#define LED_FUNCTION_STATUS "status"
> +#define LED_FUNCTION_TORCH "torch"
> +#define LED_FUNCTION_TV "tv"
> +#define LED_FUNCTION_TX "tx"
> +#define LED_FUNCTION_USB "usb"
> +#define LED_FUNCTION_WAN "wan"
> +#define LED_FUNCTION_WLAN "wlan"
> +#define LED_FUNCTION_WPS "wps"
> +

Dan

>  #endif /* __DT_BINDINGS_LEDS_H */
> 


-- 
------------------
Dan Murphy